I used fdisk and changed the labels of sdb and sdc to Linux Raid Autodetect (fd). Makefs of ext3 on both and recreated /dev/md0. and it still fails saying "wrong fs type or bad superblock. I will now try ext2 jus for a try. thanks Marc On Fri, 2006-01-27 at 09:32 -0500, Tom Callahan wrote: > Sorry, partition "types" , not labels. > > Thanks, > > Tom Callahan > TESSCO Technologies > Desk: (410)-229-1361 > Cell: (443)-506-6216 > Email: callahant@xxxxxxxxxx > > A real engineer only resorts to documentation when the keyboard dents on the forehead get too noticeable. > > > > Tom Callahan wrote: > > >Make sure the partition labels in fdisk are set to "Linux Raid Autodetect" > > > >Thanks, > > > >Tom Callahan > >TESSCO Technologies > >Desk: (410)-229-1361 > >Cell: (443)-506-6216 > >Email: callahant@xxxxxxxxxx > > > >A real engineer only resorts to documentation when the keyboard dents on the forehead get too noticeable. > > > > > > > >baran.yurdagul@xxxxxxxxxxxxxxx wrote: > > > > > > > >>Can you make some full fsck to filesystem ? > >> > >>-----Original Message----- > >>From: redhat-list-bounces@xxxxxxxxxx > >>[mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of Marc Leveille > >>Sent: Friday, January 27, 2006 3:50 PM > >>To: General Red Hat Linux discussion list > >>Subject: RE: Help with ES v3 Raid1 (Mirror) > >> > >>Hi, I used ext3. I will try again today using ext2 as I have no other > >>idea. I only have experience with hardware raid with Windows. > >> > >>thanks > >> > >>Marc > >> > >>On Fri, 2006-01-27 at 08:09 +0200, baran.yurdagul@xxxxxxxxxxxxxxx wrote: > >> > >> > >> > >> > >>>Which option did u use while creating the filesystem, ext2 or ext3 via > >>>mkfs command ? > >>> > >>>-----Original Message----- > >>>From: redhat-list-bounces@xxxxxxxxxx > >>>[mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of Marc Leveille > >>>Sent: Thursday, January 26, 2006 9:52 PM > >>>To: redhat-list@xxxxxxxxxx > >>>Subject: Help with ES v3 Raid1 (Mirror) > >>> > >>>Hi, I'm trying to setup a Raid1 mirror between 2 hard drives. I have > >>> > >>> > >>> > >>> > >>the > >> > >> > >> > >> > >>>following. > >>> > >>>1- SDA 36gig System disk > >>>2- SDB 36gig blank > >>>3- SDC 36gig blank > >>> > >>>I'm trying to Mirror SDB to SDC by doing the following. > >>> > >>>1- By using FDisk I created SDB1 and SDC1 on each drive. > >>>2- I then makefs ext3 for each partition. > >>>3- Then I used mkadm --create /dev/md0 --level=1 > >>>--raid-devices=2 /dev/sdb1 /dev/sdc1 > >>> > >>>I ran watch cat /proc/mdstat until the process was completed. > >>>4- when it was complete I tested the mount using mount -t > >>>ext3 /dev/md0 /home/apps and it mounted and I was able to open it. > >>>5- I then edited fstab with /dev/md0 /home/apps ext3 defaults 1 2 and > >>>rebooted. > >>>6- I now get the following error at boot. > >>> > >>>FSCK.ext3 /dev/mdo the superblock could not be read or does not > >>> > >>> > >>> > >>> > >>describe > >> > >> > >> > >> > >>>a correct EXT2 Filesystem.......bla bla and asks to run E2FSCK -B 8193 > >>> > >>>7- I used Vi and comented out the mount in fstab and re-booted. I > >>> > >>> > >>> > >>> > >>tried > >> > >> > >> > >> > >>>to manually mount the drive the same way as (Item #4) and it now fails > >>>Mount: Wrong FS Type. > >>> > >>>Any ideas as to what I need to do. Sould I use ext3 ? > >>> > >>>thanks > >>> > >>>Marc > >>> > >>>-- > >>>redhat-list mailing list > >>>unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe > >>>https://www.redhat.com/mailman/listinfo/redhat-list > >>> > >>> > >>> > >>> > >>> > >>> > >>> > >>************************************************************************ > >> > >> > >> > >> > >>>Bu elektronik posta ve onunla iletilen butun dosyalar sadece > >>> > >>> > >>> > >>> > >>gondericisi tarafindan almasi amaclanan yetkili gercek ya da tuzel > >>kisinin kullanimi icindir. Eger soz konusu yetkili alici degilseniz bu > >>elektronik postanin icerigini aciklamaniz, kopyalamaniz, yonlendirmeniz > >>ve kullanmaniz kesinlikle yasaktir ve bu elektronik postayi derhal > >>silmeniz gerekmektedir. > >> > >> > >> > >> > >>>TURKCELL bu mesajin icerdigi bilgilerin dogrulugu veya eksiksiz oldugu > >>> > >>> > >>> > >>> > >>konusunda herhangi bir garanti vermemektedir. Bu nedenle bu bilgilerin > >>ne sekilde olursa olsun iceriginden, iletilmesinden, alinmasindan ve > >>saklanmasindan sorumlu degildir. Bu mesajdaki gorusler yalnizca gonderen > >>kisiye aittir ve TURKCELLin goruslerini yansitmayabilir > >> > >> > >> > >> > >>>Bu e-posta bilinen butun bilgisayar viruslerine karsi taranmistir. > >>> > >>> > >>> > >>> > >>> > >>************************************************************************ > >> > >> > >> > >> > >>>This e-mail and any files transmitted with it are confidential and > >>> > >>> > >>> > >>> > >>intended solely for the use of the individual or entity to whom they are > >>addressed. If you are not the intended recipient you are hereby notified > >>that any dissemination, forwarding, copying or use of any of the > >>information is strictly prohibited, and the e-mail should immediately be > >>deleted. > >> > >> > >> > >> > >>>TURKCELL makes no warranty as to the accuracy or completeness of any > >>> > >>> > >>> > >>> > >>information contained in this message and hereby excludes any liability > >>of any kind for the information contained therein or for the information > >>transmission, reception, storage or use of such in any way whatsoever. > >>The opinions expressed in this message belong to sender alone and may > >>not necessarily reflect the opinions of TURKCELL. > >> > >> > >> > >> > >>>This e-mail has been scanned for all known computer viruses. > >>> > >>> > >>> > >>> > >>> > >>************************************************************************ > >> > >> > >> > >> > >>> > >>> > >>> > >>> > >> > >> > >> > >> > > > > > > > -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
