I think I may have the solution, ps -ef|grep upsd , if upsd isn't running it has nothing to connect to. I just did a soft link between etc/init.d/rc3.d/S99bulldog and /usr/local/S99bulldog to make sure it always comes up. If it isn't running ./upsd will also work then try ./monitor. Hope that helps Barry Johnson -----Original Message----- From: redhat-list-admin@xxxxxxxxxx [mailto:redhat-list-admin@xxxxxxxxxx] On Behalf Of Richard S. Crawford Sent: Wednesday, February 04, 2004 9:58 AM To: redhat-list@xxxxxxxxxx Subject: RE: Belkin Regulator Pro UPS (with USB) On Wed, 2004-02-04 at 06:46, Barry Johnson wrote (quoting me): > > Anyone out there using one of these on their RH 8 box? > I'm using one but it is a serial version, what problems are you > having?? It's powered up and the battery goes through the self-check fine. When I try to launch the monitor software, however, it displays nothing about the UPS device. It says that it has established a connection from the computer to the UPS, but no information about the device -- voltage or anything shows up -- and it doesn't show anything about the host either. The computer which is hooked up to the UPS is set up as a master. I'm not sure if I've missed a step or if there is a configuration problem. I have it set to talk to /dev/ttyUSB0. -- Slainte, Richard S. Crawford AIM: Buffalo2K / Y!: rscrawford / ICQ: 11640404 Howard Dean for America: http://www.deanforamerica.com http://www.mossroot.com http://www.stonegoose.com "It is only with our heart that we can see clearly. What is essential is invisible to the eye." --Antoine de Saint Exupery -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
