|
Hello All,
I have a Leased line 128 kb/s
bandwidth.
in my network I use Linux router with 2 nic, eth0
is global IP address, and eth1 is local 192.168.1.1/24 and, I use NAT, Iptables,
and so on. :).
Now I must share the 128 kb/s bandwidth between our
office and the office next door to us. and for this I have added one another
subnet on eth1:1 192.168.10.1/24 and have given them local IP addresses from
this subnet. they can go internet, using my proxy server,
etc....
But I have to share the bandwidth so, that they
could use only 64 kb/s form the 128. I know that it can be done with CBQ, but
actually it seams to be very complicated for me, and I am not sure that CBQ is
working with eth1:1, eth1:2 etc, as far as I understood it works only the
physical interface, like eth1, but not eth1:0, .....
anyways Please suggest me a solution for these, and
also if it is CBQ, so please help me in it. maybe with examples, or some
good documentation or some good advice :).
Some Solution PLEASSSE !!!!!!!!!
Thanks in advance.
|
