On Sat, 2003-12-20 at 03:33, Rudolf Amirjanyan wrote: > Hello All, > I have a Leased line 128 kb/s bandwidth. > in my network I use Linux router with 2 nic, eth0 is global IP > address, and eth1 is local 192.168.1.1/24 and, I use NAT, Iptables, > and so on. :). > Now I must share the 128 kb/s bandwidth between our office and the > office next door to us. and for this I have added one another subnet > on eth1:1 192.168.10.1/24 and have given them local IP addresses from > this subnet. they can go internet, using my proxy server, etc.... > But I have to share the bandwidth so, that they could use only 64 kb/s > form the 128. I know that it can be done with CBQ, but actually it > seams to be very complicated for me, and I am not sure that CBQ is > working with eth1:1, eth1:2 etc, as far as I understood it works only > the physical interface, like eth1, but not eth1:0, ..... > anyways Please suggest me a solution for these, and also if it is CBQ, > so please help me in it. maybe with examples, or some good > documentation or some good advice :). > Some Solution PLEASSSE !!!!!!!!! Look through the archives for "QoS". In particular, the following post may help you out: http://marc.theaimsgroup.com/?l=redhat-list&m=106008685931716&w=2 -- Jason Dixon, RHCE DixonGroup Consulting http://www.dixongroup.net -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list