Re: Cannot fix Current_Pending_Sector even after check and repair

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 29 Oct 2019 12:05:02 +0000
Jorge Bastos <jorge.mrbastos@xxxxxxxxx> wrote:

> Same, especially with WD drives, they appear to be false positives, if
> you can take the disk offline a full disk write will usually get rid
> of them.

Oh and talking of "especially WD" and especially Green, such transient errors
are a a sure symptom of rust developing on PCB contact pads:
https://www.youtube.com/watch?v=tDTt_yjYYQ8

E.g. Hitachi doesn't have this issue (they have drops of solder on each
contact pad); not much experience with Seagate; and WD themselves later
improved the design of this connection (redesigned type seen at least on a 6TB
WD Red).

-- 
With respect,
Roman



[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux