Re: RAID1 scrub ignoring read errors?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I have a red with it set to non-zero.  The red's do seem to not as
easily reallocate sectors as some other drivers I have had.

Device Model:     WDC WD30EFRX-68EUZN0
  4 Start_Stop_Count        0x0032   100   100   000    Old_age
Always       -       940
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail
Always       -       9
  9 Power_On_Hours          0x0032   079   079   000    Old_age
Always       -       16032
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age
Always       -       15
196 Reallocated_Event_Count 0x0032   196   196   000    Old_age
Always       -       4
# 1  Extended offline    Completed without error       00%     16010         -



[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux