Re: RAID1 scrub ignoring read errors?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2018-12-03 18:35, Phil Turmel wrote:
> Your drives appear to be fine.  I suspect you have a problem with other
> hardware in this box.

When I repeat `smartctl -t short` on these disks, it fails at exactly the same sector:

Disk 1:
  Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  # 1  Short offline       Completed: read failure       40%     16424         7501728
  # 2  Short offline       Completed: read failure       40%     16398         7501728

Disk 2:
  Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  # 1  Short offline       Completed: read failure       50%     16424         1758544
  # 2  Short offline       Completed: read failure       50%     16398         1758544

Doesn't this suggest that this is not unfortunate behaviour of a power supply, but permanent damage to the disks (even if originally caused by a power or power supply problem)?



[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux