Hi all,
Bump?
Kai Teoh
> On Nov 6, 2017, at 9:10 AM, Jun-Kai Teoh <kai.teoh@xxxxxxxxx> wrote:
>
> Hi all,
>
> Soft bumping this thread again. My raid array is still down, and I haven't touched anything. I'll briefly run through the basics:
>
> - 7x4TB raid 5 array
> - One of the 4TB drives dropped (according to the pros here, I was unaware of it because I didn't have a monitor set up)
> - I added another 4TB drive, making it an 8x4TB array
> - Partway during reshaping, machine lost power.
> - Brought machine back, tried to bring array up, it doesn't work and says 6 drives, 1 rebuilding
> - /dev/sda is the drive that was dropped
>
> *the mdadm config also changed from md126 to md127, and the new one looks way too little. mdadm config shows md127, but mdadm -D shows md126.
>
> Below are all the stuff I provided the last time since I think it might be buried now.
>
> In order of appearance
> 1. mdadm version
> 2. kernel
> 3. distro
> 4. mdadm -E
> 5. mdadm -D
> 6. SMART info
>
> --------
> mdadm version (mdadm --version)
> mdadm - v3.3 - 3rd September 2013
> --------
>
> --------
> kernel (uname -mrsn)
> Linux livingrm-server 4.4.0-97-generic x86_64
> --------
>
> --------
> distro
> Ubuntu 16.04 LTS
> --------
>
> /dev/sda:
> Magic : a92b4efc
> Version : 1.2
> Feature Map : 0x1
> Array UUID : f7333d4f:8300969d:55148d64:93c8afc8
> Name : livingrm-server:2 (local to host livingrm-server)
> Creation Time : Thu Jun 30 07:57:36 2016
> Raid Level : raid5
> Raid Devices : 7
>
> Avail Dev Size : 7813775024 (3725.90 GiB 4000.65 GB)
> Array Size : 23441323008 (22355.39 GiB 24003.91 GB)
> Used Dev Size : 7813774336 (3725.90 GiB 4000.65 GB)
> Data Offset : 262144 sectors
> Super Offset : 8 sectors
> Unused Space : before=262056 sectors, after=688 sectors
> State : clean
> Device UUID : 9c14bcb8:be8310f5:5b50c3a7:e6e57423
>
> Internal Bitmap : 8 sectors from superblock
> Update Time : Sun Jan 15 08:09:15 2017
> Bad Block Log : 512 entries available at offset 72 sectors
> Checksum : 13425c44 - correct
> Events : 5667
>
> Layout : left-symmetric
> Chunk Size : 512K
>
> Device Role : Active device 2
> Array State : AAAAAAA ('A' == active, '.' == missing, 'R' == replacing)
> /dev/sdb:
> Magic : a92b4efc
> Version : 1.2
> Feature Map : 0x45
> Array UUID : f7333d4f:8300969d:55148d64:93c8afc8
> Name : livingrm-server:2 (local to host livingrm-server)
> Creation Time : Thu Jun 30 07:57:36 2016
> Raid Level : raid5
> Raid Devices : 8
>
> Avail Dev Size : 7813775024 (3725.90 GiB 4000.65 GB)
> Array Size : 27348210176 (26081.29 GiB 28004.57 GB)
> Used Dev Size : 7813774336 (3725.90 GiB 4000.65 GB)
> Data Offset : 262144 sectors
> New Offset : 254976 sectors
> Super Offset : 8 sectors
> State : active
> Device UUID : 15d85573:6e78f040:8c028ef3:d1301f9d
>
> Internal Bitmap : 8 sectors from superblock
> Reshape pos'n : 39348736 (37.53 GiB 40.29 GB)
> Delta Devices : 1 (7->8)
>
> Update Time : Fri Oct 27 19:46:43 2017
> Bad Block Log : 512 entries available at offset 72 sectors
> Checksum : e568d9d9 - correct
> Events : 650554
>
> Layout : left-symmetric
> Chunk Size : 512K
>
> Device Role : Active device 3
> Array State : AAAAAAA. ('A' == active, '.' == missing, 'R' == replacing)
> /dev/sdc:
> Magic : a92b4efc
> Version : 1.2
> Feature Map : 0x45
> Array UUID : f7333d4f:8300969d:55148d64:93c8afc8
> Name : livingrm-server:2 (local to host livingrm-server)
> Creation Time : Thu Jun 30 07:57:36 2016
> Raid Level : raid5
> Raid Devices : 8
>
> Avail Dev Size : 7813775024 (3725.90 GiB 4000.65 GB)
> Array Size : 27348210176 (26081.29 GiB 28004.57 GB)
> Used Dev Size : 7813774336 (3725.90 GiB 4000.65 GB)
> Data Offset : 262144 sectors
> New Offset : 254976 sectors
> Super Offset : 8 sectors
> State : clean
> Device UUID : 64d5961e:230e558c:3748b561:a7c6ab8c
>
> Internal Bitmap : 8 sectors from superblock
> Reshape pos'n : 39348736 (37.53 GiB 40.29 GB)
> Delta Devices : 1 (7->8)
>
> Update Time : Fri Oct 27 19:46:43 2017
> Bad Block Log : 512 entries available at offset 72 sectors
> Checksum : 39c2485b - correct
> Events : 650554
>
> Layout : left-symmetric
> Chunk Size : 512K
>
> Device Role : Active device 0
> Array State : AAAAAAA. ('A' == active, '.' == missing, 'R' == replacing)
> /dev/sde:
> Magic : a92b4efc
> Version : 1.2
> Feature Map : 0x45
> Array UUID : f7333d4f:8300969d:55148d64:93c8afc8
> Name : livingrm-server:2 (local to host livingrm-server)
> Creation Time : Thu Jun 30 07:57:36 2016
> Raid Level : raid5
> Raid Devices : 8
>
> Avail Dev Size : 7813775024 (3725.90 GiB 4000.65 GB)
> Array Size : 27348210176 (26081.29 GiB 28004.57 GB)
> Used Dev Size : 7813774336 (3725.90 GiB 4000.65 GB)
> Data Offset : 262144 sectors
> New Offset : 254976 sectors
> Super Offset : 8 sectors
> State : active
> Device UUID : 2df0b319:bdb18eee:27b318ec:da55d53d
>
> Internal Bitmap : 8 sectors from superblock
> Reshape pos'n : 39348736 (37.53 GiB 40.29 GB)
> Delta Devices : 1 (7->8)
>
> Update Time : Fri Oct 27 19:46:43 2017
> Bad Block Log : 512 entries available at offset 72 sectors
> Checksum : d2a600e7 - correct
> Events : 650554
>
> Layout : left-symmetric
> Chunk Size : 512K
>
> Device Role : Active device 6
> Array State : AAAAAAA. ('A' == active, '.' == missing, 'R' == replacing)
> /dev/sdf:
> Magic : a92b4efc
> Version : 1.2
> Feature Map : 0x45
> Array UUID : f7333d4f:8300969d:55148d64:93c8afc8
> Name : livingrm-server:2 (local to host livingrm-server)
> Creation Time : Thu Jun 30 07:57:36 2016
> Raid Level : raid5
> Raid Devices : 8
>
> Avail Dev Size : 7813775024 (3725.90 GiB 4000.65 GB)
> Array Size : 27348210176 (26081.29 GiB 28004.57 GB)
> Used Dev Size : 7813774336 (3725.90 GiB 4000.65 GB)
> Data Offset : 262144 sectors
> New Offset : 254976 sectors
> Super Offset : 8 sectors
> State : active
> Device UUID : f1a790a9:98e01257:d9ab257d:95c8f1fc
>
> Internal Bitmap : 8 sectors from superblock
> Reshape pos'n : 39348736 (37.53 GiB 40.29 GB)
> Delta Devices : 1 (7->8)
>
> Update Time : Fri Oct 27 19:46:43 2017
> Bad Block Log : 512 entries available at offset 72 sectors
> Checksum : 1b3052f2 - correct
> Events : 650554
>
> Layout : left-symmetric
> Chunk Size : 512K
>
> Device Role : Active device 4
> Array State : AAAAAAA. ('A' == active, '.' == missing, 'R' == replacing)
> /dev/sdg:
> Magic : a92b4efc
> Version : 1.2
> Feature Map : 0x45
> Array UUID : f7333d4f:8300969d:55148d64:93c8afc8
> Name : livingrm-server:2 (local to host livingrm-server)
> Creation Time : Thu Jun 30 07:57:36 2016
> Raid Level : raid5
> Raid Devices : 8
>
> Avail Dev Size : 7813775024 (3725.90 GiB 4000.65 GB)
> Array Size : 27348210176 (26081.29 GiB 28004.57 GB)
> Used Dev Size : 7813774336 (3725.90 GiB 4000.65 GB)
> Data Offset : 262144 sectors
> New Offset : 254976 sectors
> Super Offset : 8 sectors
> State : active
> Device UUID : 6f44eba1:29d246a4:c5e8312e:bac00a7b
>
> Internal Bitmap : 8 sectors from superblock
> Reshape pos'n : 39348736 (37.53 GiB 40.29 GB)
> Delta Devices : 1 (7->8)
>
> Update Time : Fri Oct 27 19:46:43 2017
> Bad Block Log : 512 entries available at offset 72 sectors
> Checksum : 8fe4160e - correct
> Events : 650554
>
> Layout : left-symmetric
> Chunk Size : 512K
>
> Device Role : Active device 1
> Array State : AAAAAAA. ('A' == active, '.' == missing, 'R' == replacing)
> /dev/sdh:
> Magic : a92b4efc
> Version : 1.2
> Feature Map : 0x47
> Array UUID : f7333d4f:8300969d:55148d64:93c8afc8
> Name : livingrm-server:2 (local to host livingrm-server)
> Creation Time : Thu Jun 30 07:57:36 2016
> Raid Level : raid5
> Raid Devices : 8
>
> Avail Dev Size : 7813775024 (3725.90 GiB 4000.65 GB)
> Array Size : 27348210176 (26081.29 GiB 28004.57 GB)
> Used Dev Size : 7813774336 (3725.90 GiB 4000.65 GB)
> Data Offset : 262144 sectors
> New Offset : 254976 sectors
> Super Offset : 8 sectors
> Recovery Offset : 11264816 sectors
> State : active
> Device UUID : 109b7a2f:0529794c:2cf95cc1:d6c0bd6b
>
> Internal Bitmap : 8 sectors from superblock
> Reshape pos'n : 39348736 (37.53 GiB 40.29 GB)
> Delta Devices : 1 (7->8)
>
> Update Time : Fri Oct 27 19:46:43 2017
> Bad Block Log : 512 entries available at offset 72 sectors
> Checksum : 4a2fb746 - correct
> Events : 650554
>
> Layout : left-symmetric
> Chunk Size : 512K
>
> Device Role : Active device 2
> Array State : AAAAAAA. ('A' == active, '.' == missing, 'R' == replacing)
> /dev/sdi:
> Magic : a92b4efc
> Version : 1.2
> Feature Map : 0x45
> Array UUID : f7333d4f:8300969d:55148d64:93c8afc8
> Name : livingrm-server:2 (local to host livingrm-server)
> Creation Time : Thu Jun 30 07:57:36 2016
> Raid Level : raid5
> Raid Devices : 8
>
> Avail Dev Size : 7813775024 (3725.90 GiB 4000.65 GB)
> Array Size : 27348210176 (26081.29 GiB 28004.57 GB)
> Used Dev Size : 7813774336 (3725.90 GiB 4000.65 GB)
> Data Offset : 262144 sectors
> New Offset : 254976 sectors
> Super Offset : 8 sectors
> State : active
> Device UUID : deb04cea:d6530966:6c70ca90:bebb143e
>
> Internal Bitmap : 8 sectors from superblock
> Reshape pos'n : 39348736 (37.53 GiB 40.29 GB)
> Delta Devices : 1 (7->8)
>
> Update Time : Fri Oct 27 19:46:43 2017
> Bad Block Log : 512 entries available at offset 72 sectors
> Checksum : bfaa86d9 - correct
> Events : 650554
>
> Layout : left-symmetric
> Chunk Size : 512K
>
> Device Role : Active device 5
> Array State : AAAAAAA. ('A' == active, '.' == missing, 'R' == replacing)
>
>
> --------
> /dev/md126:
> Version :
> Raid Level : raid0
> Total Devices : 0
>
> State : inactive
>
> Number Major Minor RaidDevice
> --------
>
> === START OF INFORMATION SECTION ===
> Model Family: Western Digital Red
> Device Model: WDC WD40EFRX-68WT0N0
> Serial Number: WD-WCC4E6CUCC3R
> LU WWN Device Id: 5 0014ee 2b69e1ff1
> Firmware Version: 82.00A82
> User Capacity: 4,000,787,030,016 bytes [4.00 TB]
> Sector Sizes: 512 bytes logical, 4096 bytes physical
> Rotation Rate: 5400 rpm
> Device is: In smartctl database [for details use: -P show]
> ATA Version is: ACS-2 (minor revision not indicated)
> SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
> Local Time is: Sat Oct 28 12:34:44 2017 PDT
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
>
> General SMART Values:
> Offline data collection status: (0x00) Offline data collection activity
> was never started.
> Auto Offline Data Collection: Disabled.
> Self-test execution status: ( 0) The previous self-test routine completed
> without error or no self-test has ever
> been run.
> Total time to complete Offline
> data collection: (50580) seconds.
> Offline data collection
> capabilities: (0x7b) SMART execute Offline immediate.
> Auto Offline data collection on/off support.
> Suspend Offline collection upon new
> command.
> Offline surface scan supported.
> Self-test supported.
> Conveyance Self-test supported.
> Selective Self-test supported.
> SMART capabilities: (0x0003) Saves SMART data before entering
> power-saving mode.
> Supports SMART auto save timer.
> Error logging capability: (0x01) Error logging supported.
> General Purpose Logging supported.
> Short self-test routine
> recommended polling time: ( 2) minutes.
> Extended self-test routine
> recommended polling time: ( 506) minutes.
> Conveyance self-test routine
> recommended polling time: ( 5) minutes.
> SCT capabilities: (0x703d) SCT Status supported.
> SCT Error Recovery Control supported.
> SCT Feature Control supported.
> SCT Data Table supported.
>
> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
> UPDATED WHEN_FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail
> Always - 0
> 3 Spin_Up_Time 0x0027 223 182 021 Pre-fail
> Always - 5850
> 4 Start_Stop_Count 0x0032 100 100 000 Old_age
> Always - 212
> 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
> Always - 0
> 7 Seek_Error_Rate 0x002e 200 200 000 Old_age
> Always - 0
> 9 Power_On_Hours 0x0032 076 076 000 Old_age
> Always - 17743
> 10 Spin_Retry_Count 0x0032 100 100 000 Old_age
> Always - 0
> 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age
> Always - 0
> 12 Power_Cycle_Count 0x0032 100 100 000 Old_age
> Always - 212
> 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age
> Always - 121
> 193 Load_Cycle_Count 0x0032 192 192 000 Old_age
> Always - 25990
> 194 Temperature_Celsius 0x0022 120 092 000 Old_age
> Always - 32
> 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
> Always - 0
> 197 Current_Pending_Sector 0x0032 200 200 000 Old_age
> Always - 0
> 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age
> Offline - 0
> 199 UDMA_CRC_Error_Count 0x0032 199 129 000 Old_age
> Always - 421
> 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age
> Offline - 0
>
> SMART Error Log Version: 1
> No Errors Logged
>
> SMART Self-test log structure revision number 1
> No self-tests have been logged. [To run self-tests, use: smartctl -t]
>
> SMART Selective self-test log data structure revision number 1
> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
> 1 0 0 Not_testing
> 2 0 0 Not_testing
> 3 0 0 Not_testing
> 4 0 0 Not_testing
> 5 0 0 Not_testing
> Selective self-test flags (0x0):
> After scanning selected spans, do NOT read-scan remainder of disk.
> If Selective self-test is pending on power-up, resume after 0 minute delay.
>
> smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-97-generic] (local build)
> Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
>
> === START OF INFORMATION SECTION ===
> Model Family: Western Digital Red
> Device Model: WDC WD40EFRX-68WT0N0
> Serial Number: WD-WCC4E4K2JPZT
> LU WWN Device Id: 5 0014ee 2b510b64f
> Firmware Version: 80.00A80
> User Capacity: 4,000,787,030,016 bytes [4.00 TB]
> Sector Sizes: 512 bytes logical, 4096 bytes physical
> Rotation Rate: 5400 rpm
> Device is: In smartctl database [for details use: -P show]
> ATA Version is: ACS-2 (minor revision not indicated)
> SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
> Local Time is: Sat Oct 28 12:35:00 2017 PDT
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
>
> General SMART Values:
> Offline data collection status: (0x00) Offline data collection activity
> was never started.
> Auto Offline Data Collection: Disabled.
> Self-test execution status: ( 0) The previous self-test routine completed
> without error or no self-test has ever
> been run.
> Total time to complete Offline
> data collection: (52320) seconds.
> Offline data collection
> capabilities: (0x7b) SMART execute Offline immediate.
> Auto Offline data collection on/off support.
> Suspend Offline collection upon new
> command.
> Offline surface scan supported.
> Self-test supported.
> Conveyance Self-test supported.
> Selective Self-test supported.
> SMART capabilities: (0x0003) Saves SMART data before entering
> power-saving mode.
> Supports SMART auto save timer.
> Error logging capability: (0x01) Error logging supported.
> General Purpose Logging supported.
> Short self-test routine
> recommended polling time: ( 2) minutes.
> Extended self-test routine
> recommended polling time: ( 523) minutes.
> Conveyance self-test routine
> recommended polling time: ( 5) minutes.
> SCT capabilities: (0x703d) SCT Status supported.
> SCT Error Recovery Control supported.
> SCT Feature Control supported.
> SCT Data Table supported.
>
> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
> UPDATED WHEN_FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail
> Always - 0
> 3 Spin_Up_Time 0x0027 222 179 021 Pre-fail
> Always - 5891
> 4 Start_Stop_Count 0x0032 098 098 000 Old_age
> Always - 2624
> 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
> Always - 0
> 7 Seek_Error_Rate 0x002e 200 200 000 Old_age
> Always - 0
> 9 Power_On_Hours 0x0032 064 064 000 Old_age
> Always - 26647
> 10 Spin_Retry_Count 0x0032 100 100 000 Old_age
> Always - 0
> 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age
> Always - 0
> 12 Power_Cycle_Count 0x0032 100 100 000 Old_age
> Always - 310
> 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age
> Always - 184
> 193 Load_Cycle_Count 0x0032 188 188 000 Old_age
> Always - 38893
> 194 Temperature_Celsius 0x0022 120 092 000 Old_age
> Always - 32
> 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
> Always - 0
> 197 Current_Pending_Sector 0x0032 200 200 000 Old_age
> Always - 0
> 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age
> Offline - 0
> 199 UDMA_CRC_Error_Count 0x0032 200 192 000 Old_age
> Always - 14
> 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age
> Offline - 0
>
> SMART Error Log Version: 1
> No Errors Logged
>
> SMART Self-test log structure revision number 1
> No self-tests have been logged. [To run self-tests, use: smartctl -t]
>
> SMART Selective self-test log data structure revision number 1
> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
> 1 0 0 Not_testing
> 2 0 0 Not_testing
> 3 0 0 Not_testing
> 4 0 0 Not_testing
> 5 0 0 Not_testing
> Selective self-test flags (0x0):
> After scanning selected spans, do NOT read-scan remainder of disk.
> If Selective self-test is pending on power-up, resume after 0 minute delay.
>
> smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-97-generic] (local build)
> Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
>
> === START OF INFORMATION SECTION ===
> Model Family: Western Digital Red
> Device Model: WDC WD40EFRX-68WT0N0
> Serial Number: WD-WCC4E4VTX9TP
> LU WWN Device Id: 5 0014ee 261485dc4
> Firmware Version: 82.00A82
> User Capacity: 4,000,787,030,016 bytes [4.00 TB]
> Sector Sizes: 512 bytes logical, 4096 bytes physical
> Rotation Rate: 5400 rpm
> Device is: In smartctl database [for details use: -P show]
> ATA Version is: ACS-2 (minor revision not indicated)
> SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
> Local Time is: Sat Oct 28 12:35:03 2017 PDT
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
>
> General SMART Values:
> Offline data collection status: (0x00) Offline data collection activity
> was never started.
> Auto Offline Data Collection: Disabled.
> Self-test execution status: ( 0) The previous self-test routine completed
> without error or no self-test has ever
> been run.
> Total time to complete Offline
> data collection: (54780) seconds.
> Offline data collection
> capabilities: (0x7b) SMART execute Offline immediate.
> Auto Offline data collection on/off support.
> Suspend Offline collection upon new
> command.
> Offline surface scan supported.
> Self-test supported.
> Conveyance Self-test supported.
> Selective Self-test supported.
> SMART capabilities: (0x0003) Saves SMART data before entering
> power-saving mode.
> Supports SMART auto save timer.
> Error logging capability: (0x01) Error logging supported.
> General Purpose Logging supported.
> Short self-test routine
> recommended polling time: ( 2) minutes.
> Extended self-test routine
> recommended polling time: ( 548) minutes.
> Conveyance self-test routine
> recommended polling time: ( 5) minutes.
> SCT capabilities: (0x703d) SCT Status supported.
> SCT Error Recovery Control supported.
> SCT Feature Control supported.
> SCT Data Table supported.
>
> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
> UPDATED WHEN_FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail
> Always - 0
> 3 Spin_Up_Time 0x0027 222 181 021 Pre-fail
> Always - 5866
> 4 Start_Stop_Count 0x0032 100 100 000 Old_age
> Always - 210
> 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
> Always - 0
> 7 Seek_Error_Rate 0x002e 200 200 000 Old_age
> Always - 0
> 9 Power_On_Hours 0x0032 076 076 000 Old_age
> Always - 17748
> 10 Spin_Retry_Count 0x0032 100 100 000 Old_age
> Always - 0
> 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age
> Always - 0
> 12 Power_Cycle_Count 0x0032 100 100 000 Old_age
> Always - 210
> 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age
> Always - 121
> 193 Load_Cycle_Count 0x0032 189 189 000 Old_age
> Always - 33283
> 194 Temperature_Celsius 0x0022 120 092 000 Old_age
> Always - 32
> 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
> Always - 0
> 197 Current_Pending_Sector 0x0032 200 200 000 Old_age
> Always - 0
> 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age
> Offline - 0
> 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age
> Always - 0
> 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age
> Offline - 0
>
> SMART Error Log Version: 1
> No Errors Logged
>
> SMART Self-test log structure revision number 1
> No self-tests have been logged. [To run self-tests, use: smartctl -t]
>
> SMART Selective self-test log data structure revision number 1
> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
> 1 0 0 Not_testing
> 2 0 0 Not_testing
> 3 0 0 Not_testing
> 4 0 0 Not_testing
> 5 0 0 Not_testing
> Selective self-test flags (0x0):
> After scanning selected spans, do NOT read-scan remainder of disk.
> If Selective self-test is pending on power-up, resume after 0 minute delay.
>
> smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-97-generic] (local build)
> Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
>
> === START OF INFORMATION SECTION ===
> Model Family: Western Digital Red
> Device Model: WDC WD40EFRX-68WT0N0
> Serial Number: WD-WCC4E2VKP3SV
> LU WWN Device Id: 5 0014ee 2620754c8
> Firmware Version: 82.00A82
> User Capacity: 4,000,787,030,016 bytes [4.00 TB]
> Sector Sizes: 512 bytes logical, 4096 bytes physical
> Rotation Rate: 5400 rpm
> Device is: In smartctl database [for details use: -P show]
> ATA Version is: ACS-2 (minor revision not indicated)
> SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
> Local Time is: Sat Oct 28 12:35:06 2017 PDT
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
>
> General SMART Values:
> Offline data collection status: (0x00) Offline data collection activity
> was never started.
> Auto Offline Data Collection: Disabled.
> Self-test execution status: ( 0) The previous self-test routine completed
> without error or no self-test has ever
> been run.
> Total time to complete Offline
> data collection: (51120) seconds.
> Offline data collection
> capabilities: (0x7b) SMART execute Offline immediate.
> Auto Offline data collection on/off support.
> Suspend Offline collection upon new
> command.
> Offline surface scan supported.
> Self-test supported.
> Conveyance Self-test supported.
> Selective Self-test supported.
> SMART capabilities: (0x0003) Saves SMART data before entering
> power-saving mode.
> Supports SMART auto save timer.
> Error logging capability: (0x01) Error logging supported.
> General Purpose Logging supported.
> Short self-test routine
> recommended polling time: ( 2) minutes.
> Extended self-test routine
> recommended polling time: ( 512) minutes.
> Conveyance self-test routine
> recommended polling time: ( 5) minutes.
> SCT capabilities: (0x703d) SCT Status supported.
> SCT Error Recovery Control supported.
> SCT Feature Control supported.
> SCT Data Table supported.
>
> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
> UPDATED WHEN_FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail
> Always - 0
> 3 Spin_Up_Time 0x0027 223 183 021 Pre-fail
> Always - 5825
> 4 Start_Stop_Count 0x0032 100 100 000 Old_age
> Always - 180
> 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
> Always - 0
> 7 Seek_Error_Rate 0x002e 200 200 000 Old_age
> Always - 0
> 9 Power_On_Hours 0x0032 083 083 000 Old_age
> Always - 12934
> 10 Spin_Retry_Count 0x0032 100 100 000 Old_age
> Always - 0
> 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age
> Always - 0
> 12 Power_Cycle_Count 0x0032 100 100 000 Old_age
> Always - 180
> 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age
> Always - 112
> 193 Load_Cycle_Count 0x0032 192 192 000 Old_age
> Always - 26411
> 194 Temperature_Celsius 0x0022 120 101 000 Old_age
> Always - 32
> 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
> Always - 0
> 197 Current_Pending_Sector 0x0032 200 200 000 Old_age
> Always - 0
> 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age
> Offline - 0
> 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age
> Always - 0
> 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age
> Offline - 0
>
> SMART Error Log Version: 1
> No Errors Logged
>
> SMART Self-test log structure revision number 1
> No self-tests have been logged. [To run self-tests, use: smartctl -t]
>
> SMART Selective self-test log data structure revision number 1
> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
> 1 0 0 Not_testing
> 2 0 0 Not_testing
> 3 0 0 Not_testing
> 4 0 0 Not_testing
> 5 0 0 Not_testing
> Selective self-test flags (0x0):
> After scanning selected spans, do NOT read-scan remainder of disk.
> If Selective self-test is pending on power-up, resume after 0 minute delay.
>
> smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-97-generic] (local build)
> Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
>
> === START OF INFORMATION SECTION ===
> Model Family: Western Digital Red
> Device Model: WDC WD40EFRX-68WT0N0
> Serial Number: WD-WCC4E4JNHEC6
> LU WWN Device Id: 5 0014ee 2614842c3
> Firmware Version: 82.00A82
> User Capacity: 4,000,787,030,016 bytes [4.00 TB]
> Sector Sizes: 512 bytes logical, 4096 bytes physical
> Rotation Rate: 5400 rpm
> Device is: In smartctl database [for details use: -P show]
> ATA Version is: ACS-2 (minor revision not indicated)
> SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
> Local Time is: Sat Oct 28 12:35:10 2017 PDT
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
>
> General SMART Values:
> Offline data collection status: (0x00) Offline data collection activity
> was never started.
> Auto Offline Data Collection: Disabled.
> Self-test execution status: ( 0) The previous self-test routine completed
> without error or no self-test has ever
> been run.
> Total time to complete Offline
> data collection: (53940) seconds.
> Offline data collection
> capabilities: (0x7b) SMART execute Offline immediate.
> Auto Offline data collection on/off support.
> Suspend Offline collection upon new
> command.
> Offline surface scan supported.
> Self-test supported.
> Conveyance Self-test supported.
> Selective Self-test supported.
> SMART capabilities: (0x0003) Saves SMART data before entering
> power-saving mode.
> Supports SMART auto save timer.
> Error logging capability: (0x01) Error logging supported.
> General Purpose Logging supported.
> Short self-test routine
> recommended polling time: ( 2) minutes.
> Extended self-test routine
> recommended polling time: ( 539) minutes.
> Conveyance self-test routine
> recommended polling time: ( 5) minutes.
> SCT capabilities: (0x703d) SCT Status supported.
> SCT Error Recovery Control supported.
> SCT Feature Control supported.
> SCT Data Table supported.
>
> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
> UPDATED WHEN_FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail
> Always - 0
> 3 Spin_Up_Time 0x0027 222 180 021 Pre-fail
> Always - 5875
> 4 Start_Stop_Count 0x0032 100 100 000 Old_age
> Always - 212
> 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
> Always - 0
> 7 Seek_Error_Rate 0x002e 200 200 000 Old_age
> Always - 0
> 9 Power_On_Hours 0x0032 076 076 000 Old_age
> Always - 17748
> 10 Spin_Retry_Count 0x0032 100 100 000 Old_age
> Always - 0
> 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age
> Always - 0
> 12 Power_Cycle_Count 0x0032 100 100 000 Old_age
> Always - 212
> 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age
> Always - 127
> 193 Load_Cycle_Count 0x0032 190 190 000 Old_age
> Always - 32835
> 194 Temperature_Celsius 0x0022 120 092 000 Old_age
> Always - 32
> 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
> Always - 0
> 197 Current_Pending_Sector 0x0032 200 200 000 Old_age
> Always - 0
> 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age
> Offline - 0
> 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age
> Always - 0
> 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age
> Offline - 0
>
> SMART Error Log Version: 1
> No Errors Logged
>
> SMART Self-test log structure revision number 1
> No self-tests have been logged. [To run self-tests, use: smartctl -t]
>
> SMART Selective self-test log data structure revision number 1
> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
> 1 0 0 Not_testing
> 2 0 0 Not_testing
> 3 0 0 Not_testing
> 4 0 0 Not_testing
> 5 0 0 Not_testing
> Selective self-test flags (0x0):
> After scanning selected spans, do NOT read-scan remainder of disk.
> If Selective self-test is pending on power-up, resume after 0 minute delay.
>
> smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-97-generic] (local build)
> Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
>
> === START OF INFORMATION SECTION ===
> Model Family: Western Digital Red
> Device Model: WDC WD40EFRX-68WT0N0
> Serial Number: WD-WCC4E2ZYE8AN
> LU WWN Device Id: 5 0014ee 20bf26ce9
> Firmware Version: 82.00A82
> User Capacity: 4,000,787,030,016 bytes [4.00 TB]
> Sector Sizes: 512 bytes logical, 4096 bytes physical
> Rotation Rate: 5400 rpm
> Device is: In smartctl database [for details use: -P show]
> ATA Version is: ACS-2 (minor revision not indicated)
> SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
> Local Time is: Sat Oct 28 12:35:13 2017 PDT
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
>
> General SMART Values:
> Offline data collection status: (0x00) Offline data collection activity
> was never started.
> Auto Offline Data Collection: Disabled.
> Self-test execution status: ( 0) The previous self-test routine completed
> without error or no self-test has ever
> been run.
> Total time to complete Offline
> data collection: (54960) seconds.
> Offline data collection
> capabilities: (0x7b) SMART execute Offline immediate.
> Auto Offline data collection on/off support.
> Suspend Offline collection upon new
> command.
> Offline surface scan supported.
> Self-test supported.
> Conveyance Self-test supported.
> Selective Self-test supported.
> SMART capabilities: (0x0003) Saves SMART data before entering
> power-saving mode.
> Supports SMART auto save timer.
> Error logging capability: (0x01) Error logging supported.
> General Purpose Logging supported.
> Short self-test routine
> recommended polling time: ( 2) minutes.
> Extended self-test routine
> recommended polling time: ( 550) minutes.
> Conveyance self-test routine
> recommended polling time: ( 5) minutes.
> SCT capabilities: (0x703d) SCT Status supported.
> SCT Error Recovery Control supported.
> SCT Feature Control supported.
> SCT Data Table supported.
>
> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
> UPDATED WHEN_FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail
> Always - 0
> 3 Spin_Up_Time 0x0027 219 178 021 Pre-fail
> Always - 6016
> 4 Start_Stop_Count 0x0032 100 100 000 Old_age
> Always - 212
> 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
> Always - 0
> 7 Seek_Error_Rate 0x002e 200 200 000 Old_age
> Always - 0
> 9 Power_On_Hours 0x0032 076 076 000 Old_age
> Always - 17751
> 10 Spin_Retry_Count 0x0032 100 100 000 Old_age
> Always - 0
> 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age
> Always - 0
> 12 Power_Cycle_Count 0x0032 100 100 000 Old_age
> Always - 212
> 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age
> Always - 120
> 193 Load_Cycle_Count 0x0032 189 189 000 Old_age
> Always - 33470
> 194 Temperature_Celsius 0x0022 120 098 000 Old_age
> Always - 32
> 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
> Always - 0
> 197 Current_Pending_Sector 0x0032 200 200 000 Old_age
> Always - 0
> 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age
> Offline - 0
> 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age
> Always - 0
> 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age
> Offline - 0
>
> SMART Error Log Version: 1
> No Errors Logged
>
> SMART Self-test log structure revision number 1
> No self-tests have been logged. [To run self-tests, use: smartctl -t]
>
> SMART Selective self-test log data structure revision number 1
> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
> 1 0 0 Not_testing
> 2 0 0 Not_testing
> 3 0 0 Not_testing
> 4 0 0 Not_testing
> 5 0 0 Not_testing
> Selective self-test flags (0x0):
> After scanning selected spans, do NOT read-scan remainder of disk.
> If Selective self-test is pending on power-up, resume after 0 minute delay.
>
> smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-97-generic] (local build)
> Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
>
> === START OF INFORMATION SECTION ===
> Model Family: Western Digital Red
> Device Model: WDC WD40EFRX-68N32N0
> Serial Number: WD-WCC7K7PZ7R6Z
> LU WWN Device Id: 5 0014ee 26410129e
> Firmware Version: 82.00A82
> User Capacity: 4,000,787,030,016 bytes [4.00 TB]
> Sector Sizes: 512 bytes logical, 4096 bytes physical
> Rotation Rate: 5400 rpm
> Form Factor: 3.5 inches
> Device is: In smartctl database [for details use: -P show]
> ATA Version is: ACS-3 T13/2161-D revision 5
> SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
> Local Time is: Sat Oct 28 12:35:16 2017 PDT
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
>
> General SMART Values:
> Offline data collection status: (0x00) Offline data collection activity
> was never started.
> Auto Offline Data Collection: Disabled.
> Self-test execution status: ( 0) The previous self-test routine completed
> without error or no self-test has ever
> been run.
> Total time to complete Offline
> data collection: (46440) seconds.
> Offline data collection
> capabilities: (0x7b) SMART execute Offline immediate.
> Auto Offline data collection on/off support.
> Suspend Offline collection upon new
> command.
> Offline surface scan supported.
> Self-test supported.
> Conveyance Self-test supported.
> Selective Self-test supported.
> SMART capabilities: (0x0003) Saves SMART data before entering
> power-saving mode.
> Supports SMART auto save timer.
> Error logging capability: (0x01) Error logging supported.
> General Purpose Logging supported.
> Short self-test routine
> recommended polling time: ( 2) minutes.
> Extended self-test routine
> recommended polling time: ( 492) minutes.
> Conveyance self-test routine
> recommended polling time: ( 5) minutes.
> SCT capabilities: (0x303d) SCT Status supported.
> SCT Error Recovery Control supported.
> SCT Feature Control supported.
> SCT Data Table supported.
>
> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
> UPDATED WHEN_FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail
> Always - 0
> 3 Spin_Up_Time 0x0027 100 253 021 Pre-fail
> Always - 0
> 4 Start_Stop_Count 0x0032 100 100 000 Old_age
> Always - 3
> 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
> Always - 0
> 7 Seek_Error_Rate 0x002e 100 253 000 Old_age
> Always - 0
> 9 Power_On_Hours 0x0032 100 100 000 Old_age
> Always - 11
> 10 Spin_Retry_Count 0x0032 100 253 000 Old_age
> Always - 0
> 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age
> Always - 0
> 12 Power_Cycle_Count 0x0032 100 100 000 Old_age
> Always - 3
> 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age
> Always - 1
> 193 Load_Cycle_Count 0x0032 200 200 000 Old_age
> Always - 3
> 194 Temperature_Celsius 0x0022 121 117 000 Old_age
> Always - 29
> 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
> Always - 0
> 197 Current_Pending_Sector 0x0032 200 200 000 Old_age
> Always - 0
> 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age
> Offline - 0
> 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age
> Always - 0
> 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age
> Offline - 0
>
> SMART Error Log Version: 1
> No Errors Logged
>
> SMART Self-test log structure revision number 1
> No self-tests have been logged. [To run self-tests, use: smartctl -t]
>
> SMART Selective self-test log data structure revision number 1
> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
> 1 0 0 Not_testing
> 2 0 0 Not_testing
> 3 0 0 Not_testing
> 4 0 0 Not_testing
> 5 0 0 Not_testing
> Selective self-test flags (0x0):
> After scanning selected spans, do NOT read-scan remainder of disk.
> If Selective self-test is pending on power-up, resume after 0 minute delay.
>
> smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-97-generic] (local build)
> Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
>
> === START OF INFORMATION SECTION ===
> Model Family: Western Digital Red
> Device Model: WDC WD40EFRX-68WT0N0
> Serial Number: WD-WCC4E4JNHKL9
> LU WWN Device Id: 5 0014ee 2b69e186b
> Firmware Version: 82.00A82
> User Capacity: 4,000,787,030,016 bytes [4.00 TB]
> Sector Sizes: 512 bytes logical, 4096 bytes physical
> Rotation Rate: 5400 rpm
> Device is: In smartctl database [for details use: -P show]
> ATA Version is: ACS-2 (minor revision not indicated)
> SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
> Local Time is: Sat Oct 28 12:35:19 2017 PDT
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
>
> General SMART Values:
> Offline data collection status: (0x00) Offline data collection activity
> was never started.
> Auto Offline Data Collection: Disabled.
> Self-test execution status: ( 0) The previous self-test routine completed
> without error or no self-test has ever
> been run.
> Total time to complete Offline
> data collection: (55260) seconds.
> Offline data collection
> capabilities: (0x7b) SMART execute Offline immediate.
> Auto Offline data collection on/off support.
> Suspend Offline collection upon new
> command.
> Offline surface scan supported.
> Self-test supported.
> Conveyance Self-test supported.
> Selective Self-test supported.
> SMART capabilities: (0x0003) Saves SMART data before entering
> power-saving mode.
> Supports SMART auto save timer.
> Error logging capability: (0x01) Error logging supported.
> General Purpose Logging supported.
> Short self-test routine
> recommended polling time: ( 2) minutes.
> Extended self-test routine
> recommended polling time: ( 552) minutes.
> Conveyance self-test routine
> recommended polling time: ( 5) minutes.
> SCT capabilities: (0x703d) SCT Status supported.
> SCT Error Recovery Control supported.
> SCT Feature Control supported.
> SCT Data Table supported.
>
> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
> UPDATED WHEN_FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail
> Always - 1
> 3 Spin_Up_Time 0x0027 220 180 021 Pre-fail
> Always - 5958
> 4 Start_Stop_Count 0x0032 100 100 000 Old_age
> Always - 673
> 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
> Always - 0
> 7 Seek_Error_Rate 0x002e 200 200 000 Old_age
> Always - 0
> 9 Power_On_Hours 0x0032 075 075 000 Old_age
> Always - 18933
> 10 Spin_Retry_Count 0x0032 100 100 000 Old_age
> Always - 0
> 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age
> Always - 0
> 12 Power_Cycle_Count 0x0032 100 100 000 Old_age
> Always - 261
> 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age
> Always - 162
> 193 Load_Cycle_Count 0x0032 189 189 000 Old_age
> Always - 35904
> 194 Temperature_Celsius 0x0022 119 091 000 Old_age
> Always - 33
> 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
> Always - 0
> 197 Current_Pending_Sector 0x0032 200 200 000 Old_age
> Always - 0
> 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age
> Offline - 0
> 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age
> Always - 0
> 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age
> Offline - 0
>
> SMART Error Log Version: 1
> No Errors Logged
>
> SMART Self-test log structure revision number 1
> No self-tests have been logged. [To run self-tests, use: smartctl -t]
>
> SMART Selective self-test log data structure revision number 1
> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
> 1 0 0 Not_testing
> 2 0 0 Not_testing
> 3 0 0 Not_testing
> 4 0 0 Not_testing
> 5 0 0 Not_testing
> Selective self-test flags (0x0):
> After scanning selected spans, do NOT read-scan remainder of disk.
> If Selective self-test is pending on power-up, resume after 0 minute delay.
>
> Kai Teoh
>
>
>> On Oct 30, 2017, at 11:18 AM, Mark Knecht <markknecht@xxxxxxxxx> wrote:
>>
>> On Mon, Oct 30, 2017 at 11:08 AM, Jun-Kai Teoh <kai.teoh@xxxxxxxxx> wrote:
>>> Thanks for all the responses, Mark, Anthony and Wol.
>>>
>>> I have another hard drive on the way, just in case sda is truly dead.
>>> I had no idea that when a drive "dies" in a RAID5 array - nothing
>>> would notify me. I obviously have much to learn, really appreciate all
>>> the input from folks so far.
>>>
>>> I think I've provided the details of my setup (kernel, mdadm ver,
>>> distro, smartctl output, and mdadm -E output) - do let me know if I've
>>> left anything out. Left the machine alone this weekend and did not do
>>> anything with it.
>>>
>>> Kai Teoh
>>>
>>
>> Kai Teoh,
>> I don't think it's fair to say 'nothing will warn you' as there are ways to
>> get messages about this stuff. More fair to say that different distros will
>> better automate some of this stuff but it's always up to the sys admin to
>> ensure the system does what you want.
>>
>> Someone will likely give you input in the next day or two. Give folks
>> a chance to catch up.
>>
>> Good luck,
>> Mark
>
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
