What is the output of cat /proc/mdstat after running the readwrite below?
Did you try the --run option?
You need to make sure the array is active/running before you try to
mount it.
BTW, has anything else happened to the array, other than the drive that
failed?
Probably should have asked for this before, but what is the full output
of smartctl for each drive, also mdadm --misc --examine /dev/sd[bcd]1
(or all three relevant devices)?
Regards,
Adam
On 12/10/17 00:35, Joseba Ibarra wrote:
Still the same. Nothing seems to have changed.
Same answers for mount commands.
Adam Goryachev escribió:
mdadm --manage /dev/md0 --readwrite
Jose Ibarra
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
