When we add a stripe to a batch, we need to be sure that
head stripe will wait for the bitmap update required for the new
stripe.
Signed-off-by: NeilBrown <neilb@xxxxxxx>
---
drivers/md/raid5.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 987c67298953..c3ccefbd4fe7 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -848,6 +848,15 @@ static void stripe_add_to_batch_list(struct r5conf *conf, struct stripe_head *sh
< IO_THRESHOLD)
md_wakeup_thread(conf->mddev->thread);
+ if (test_and_clear_bit(STRIPE_BIT_DELAY, &sh->state)) {
+ int seq = sh->bm_seq;
+ if (test_bit(STRIPE_BIT_DELAY, &sh->batch_head->state) &&
+ sh->batch_head->bm_seq > seq)
+ seq = sh->batch_head->bm_seq;
+ set_bit(STRIPE_BIT_DELAY, &sh->batch_head->state);
+ sh->batch_head->bm_seq = seq;
+ }
+
atomic_inc(&sh->count);
unlock_out:
unlock_two_stripes(head, sh);
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
