Re: Riad scrub generated errors, should I worry?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2 Mar 2015, Wilson, Jonathan wrote:

While the monthly scrub was running the following errors (at the bottom
of the post, copied from syslog) were issued.

As soon as you get UNC, it's the drive reporting that it can't successfully read a sector. Usually this sector is then reported as "pending" in your SMART output.

Since the log you provided shows a lot of sectors being corrected and you after that have 0 pending sectors on the drive, I'd say you are now fine. I would run a new scrub manually in a few days just to check, but you might be fine going forward. There is no really good way to know, but generally, a drive that throws a bunch of UNC should be monitored so this isn't becoming a common problem. I tend to replace drives that have thrown these kinds of errors if it happens on any kind of regular basis.

--
Mikael Abrahamsson    email: swmike@xxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux