Re: Optimize RAID0 for max IOPS?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear Stan Hoeppner,

In message <4D3FDC31.3010502@xxxxxxxxxxxxxxxxx> you wrote:
> 
> > # lvcreate -L 32G -n test castor0
> >   Logical volume "test" created
> > # mkfs.xfs /dev/mapper/castor0-test
> 
> Is this on that set of 4 low end Maxtor disks?  Is the above LV sitting atop
> RAID 0, RAID 5, or concatenation?

No, this is the other system, using 6 x Seagate ST31000524NS on a
Marvell MV88SX6081 8-port SATA II PCI-X Controller.

LVM is sitting on top of a RAID6 here:

md2 : active raid6 sda[0] sdi[5] sdh[4] sde[3] sdd[2] sdb[1]
      3907049792 blocks super 1.2 level 6, 16k chunk, algorithm 2 [6/6] [UUUUUU]

> Try adding some concurrency, say 8, to bonnie++ and retest both XFS and ext4.

OK, will do.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@xxxxxxx
The price of curiosity is a terminal experience.
                         - Terry Pratchett, _The Dark Side of the Sun_
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux