Re: raid5+hotspare: request for recommended procedure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 29/09/10 11:03, Tim Small wrote:
earlier firmwares for the ST3250310NS were a little buggy in my experience, so you might want to look at upgrading it (latest Seagate non-OEM firmware is SN06), which can be done with hdparm.

I should say that I've "cross-flashed" Dell's MA0D on SN0x drives too, and that seems to give good stability.

Tim.

--
South East Open Source Solutions Limited
Registered in England and Wales with company number 06134732.
Registered Office: 2 Powell Gardens, Redhill, Surrey, RH1 1TQ
VAT number: 900 6633 53  http://seoss.co.uk/ +44-(0)1273-808309

--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux