On 12/23/2009 06:12 PM, Neil Brown wrote:
Can you please see if the following patch fixes the problem.
When an array wants to resync but is waiting for other arrays
on the same devices to finish their resync, it does not abort the
resync attempt properly when an error is reported.
This should fix that.
Neil,
Sorry for the delay--holidays, etc. I tried the patch and, while the
newly added code is getting hit, I'm still hitting the issue. See below:
mxmx# ./sim_md_busy.sh -dg1 /dev/sdg -dg2 /dev/sdp -df /dev/sdp -dr /dev/sdp -create -m bug3part 2>&1 | tee md_busy_run_bug3part.6
mdadm --create /dev/md0 --force --run --level=1 --raid-devices=2 /dev/sdg1 /dev/sdp1 --assume-clean
mdadm: /dev/sdg1 appears to be part of a raid array:
level=raid1 devices=2 ctime=Fri Jan 8 10:11:09 2010
mdadm: /dev/sdp1 appears to be part of a raid array:
level=raid1 devices=2 ctime=Fri Jan 8 10:11:09 2010
mdadm: array /dev/md0 started.
mdadm --create /dev/md1 --force --run --level=1 --raid-devices=2 /dev/sdg3 /dev/sdp3 --assume-clean
mdadm: /dev/sdg3 appears to be part of a raid array:
level=raid1 devices=2 ctime=Fri Jan 8 10:11:09 2010
mdadm: /dev/sdp3 appears to be part of a raid array:
level=raid1 devices=2 ctime=Fri Jan 8 10:11:09 2010
mdadm: array /dev/md1 started.
mdadm --create /dev/md2 --force --run --level=1 --raid-devices=2 /dev/sdg4 /dev/sdp4 --assume-clean
mdadm: /dev/sdg4 appears to be part of a raid array:
level=raid1 devices=2 ctime=Fri Jan 8 10:11:09 2010
mdadm: /dev/sdp4 appears to be part of a raid array:
level=raid1 devices=2 ctime=Fri Jan 8 10:11:09 2010
mdadm: array /dev/md2 started.
mdadm --verbose --manage /dev/md0 --fail /dev/sdp1
mdadm: set /dev/sdp1 faulty in /dev/md0
mdadm --verbose --manage /dev/md0 --remove /dev/sdp1
mdadm: hot removed /dev/sdp1
mdadm --verbose --manage /dev/md1 --fail /dev/sdp3
mdadm: set /dev/sdp3 faulty in /dev/md1
mdadm --verbose --manage /dev/md1 --remove /dev/sdp3
mdadm: hot removed /dev/sdp3
mdadm --verbose --manage /dev/md2 --fail /dev/sdp4
mdadm: set /dev/sdp4 faulty in /dev/md2
mdadm --verbose --manage /dev/md2 --remove /dev/sdp4
mdadm: hot removed /dev/sdp4
mdadm --verbose --manage /dev/md0 --add /dev/sdp1
mdadm: added /dev/sdp1
mdadm --verbose --manage /dev/md1 --add /dev/sdp3
mdadm: added /dev/sdp3
mdadm --verbose --manage /dev/md2 --add /dev/sdp4
mdadm: added /dev/sdp4
Personalities : [raid1] [raid10]
md2 : active raid1 sdp4[2] sdg4[0]
4200896 blocks [2/1] [U_]
resync=DELAYED
md1 : active raid1 sdp3[2] sdg3[0]
4200896 blocks [2/1] [U_]
resync=DELAYED
md0 : active raid1 sdp1[2] sdg1[0]
4200896 blocks [2/1] [U_]
[>....................] recovery = 1.9% (80256/4200896) finish=0.8min speed=80256K/sec
unused devices: <none>
mdadm --verbose --manage /dev/md0 --fail /dev/sdp1
mdadm: set /dev/sdp1 faulty in /dev/md0
mdadm --verbose --manage /dev/md0 --remove /dev/sdp1
mdadm: hot removed /dev/sdp1
mdadm --verbose --manage /dev/md1 --fail /dev/sdp3
mdadm: set /dev/sdp3 faulty in /dev/md1
mdadm --verbose --manage /dev/md1 --remove /dev/sdp3
mdadm: hot remove failed for /dev/sdp3: Device or resource busy
mdadm: hot remove failed for /dev/sdp3: Device or resource busy
mdadm: hot remove failed for /dev/sdp3: Device or resource busy
ERROR: Command failed after 3 retries (mdadm --verbose --manage /dev/md1 --remove /dev/sdp3)
mdadm --verbose --manage /dev/md2 --fail /dev/sdp4
mdadm: set /dev/sdp4 faulty in /dev/md2
mdadm --verbose --manage /dev/md2 --remove /dev/sdp4
mdadm: hot removed /dev/sdp4
And the log from this run:
Jan 8 10:11:41 mxmx user.notice root: chkpt
Jan 8 10:11:46 mxmx user.info kernel: md: bind<sdg1>
Jan 8 10:11:46 mxmx user.info kernel: md: bind<sdp1>
Jan 8 10:11:46 mxmx user.info kernel: raid1: raid set md0 active with 2 out of 2 mirrors
Jan 8 10:11:46 mxmx user.info kernel: md0: detected capacity change from 0 to 4301717504
Jan 8 10:11:46 mxmx user.info kernel: md: bind<sdg3>
Jan 8 10:11:46 mxmx user.info kernel: md: bind<sdp3>
Jan 8 10:11:46 mxmx user.info kernel: raid1: raid set md1 active with 2 out of 2 mirrors
Jan 8 10:11:46 mxmx user.info kernel: md1: detected capacity change from 0 to 4301717504
Jan 8 10:11:47 mxmx user.info kernel: md: bind<sdg4>
Jan 8 10:11:47 mxmx user.info kernel: md: bind<sdp4>
Jan 8 10:11:47 mxmx user.info kernel: raid1: raid set md2 active with 2 out of 2 mirrors
Jan 8 10:11:47 mxmx user.info kernel: md2: detected capacity change from 0 to 4301717504
Jan 8 10:11:48 mxmx user.info kernel: md0:
Jan 8 10:11:48 mxmx user.info kernel: unknown partition table
Jan 8 10:11:48 mxmx user.alert kernel: raid1: Disk failure on sdp1, disabling device.
Jan 8 10:11:48 mxmx user.alert kernel: raid1: Operation continuing on 1 devices.
Jan 8 10:11:48 mxmx user.warn kernel: RAID1 conf printout:
Jan 8 10:11:48 mxmx user.warn kernel: --- wd:1 rd:2
Jan 8 10:11:48 mxmx user.warn kernel: disk 0, wo:0, o:1, dev:sdg1
Jan 8 10:11:48 mxmx user.warn kernel: disk 1, wo:1, o:0, dev:sdp1
Jan 8 10:11:48 mxmx user.warn kernel: RAID1 conf printout:
Jan 8 10:11:48 mxmx user.warn kernel: --- wd:1 rd:2
Jan 8 10:11:48 mxmx user.warn kernel: disk 0, wo:0, o:1, dev:sdg1
Jan 8 10:11:50 mxmx user.info kernel: md: unbind<sdp1>
Jan 8 10:11:50 mxmx user.info kernel: md: export_rdev(sdp1)
Jan 8 10:11:50 mxmx user.info kernel: md1:
Jan 8 10:11:50 mxmx user.info kernel: unknown partition table
Jan 8 10:11:50 mxmx user.alert kernel: raid1: Disk failure on sdp3, disabling device.
Jan 8 10:11:50 mxmx user.alert kernel: raid1: Operation continuing on 1 devices.
Jan 8 10:11:50 mxmx user.warn kernel: RAID1 conf printout:
Jan 8 10:11:50 mxmx user.warn kernel: --- wd:1 rd:2
Jan 8 10:11:50 mxmx user.warn kernel: disk 0, wo:0, o:1, dev:sdg3
Jan 8 10:11:50 mxmx user.warn kernel: disk 1, wo:1, o:0, dev:sdp3
Jan 8 10:11:50 mxmx user.warn kernel: RAID1 conf printout:
Jan 8 10:11:50 mxmx user.warn kernel: --- wd:1 rd:2
Jan 8 10:11:50 mxmx user.warn kernel: disk 0, wo:0, o:1, dev:sdg3
Jan 8 10:11:52 mxmx user.info kernel: md: unbind<sdp3>
Jan 8 10:11:52 mxmx user.info kernel: md: export_rdev(sdp3)
Jan 8 10:11:52 mxmx user.info kernel: md2:
Jan 8 10:11:52 mxmx user.info kernel: unknown partition table
Jan 8 10:11:52 mxmx user.alert kernel: raid1: Disk failure on sdp4, disabling device.
Jan 8 10:11:52 mxmx user.alert kernel: raid1: Operation continuing on 1 devices.
Jan 8 10:11:52 mxmx user.warn kernel: RAID1 conf printout:
Jan 8 10:11:52 mxmx user.warn kernel: --- wd:1 rd:2
Jan 8 10:11:52 mxmx user.warn kernel: disk 0, wo:0, o:1, dev:sdg4
Jan 8 10:11:52 mxmx user.warn kernel: disk 1, wo:1, o:0, dev:sdp4
Jan 8 10:11:52 mxmx user.warn kernel: RAID1 conf printout:
Jan 8 10:11:52 mxmx user.warn kernel: --- wd:1 rd:2
Jan 8 10:11:52 mxmx user.warn kernel: disk 0, wo:0, o:1, dev:sdg4
Jan 8 10:11:54 mxmx user.info kernel: md: unbind<sdp4>
Jan 8 10:11:54 mxmx user.info kernel: md: export_rdev(sdp4)
Jan 8 10:11:54 mxmx user.info kernel: md: bind<sdp1>
Jan 8 10:11:54 mxmx user.warn kernel: RAID1 conf printout:
Jan 8 10:11:54 mxmx user.warn kernel: --- wd:1 rd:2
Jan 8 10:11:54 mxmx user.warn kernel: disk 0, wo:0, o:1, dev:sdg1
Jan 8 10:11:54 mxmx user.warn kernel: disk 1, wo:1, o:1, dev:sdp1
Jan 8 10:11:54 mxmx user.info kernel: md: recovery of RAID array md0
Jan 8 10:11:54 mxmx user.info kernel: md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
Jan 8 10:11:54 mxmx user.info kernel: md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
Jan 8 10:11:54 mxmx user.info kernel: md: using 128k window, over a total of 4200896 blocks.
Jan 8 10:11:54 mxmx user.info kernel: md: bind<sdp3>
Jan 8 10:11:54 mxmx user.warn kernel: RAID1 conf printout:
Jan 8 10:11:54 mxmx user.warn kernel: --- wd:1 rd:2
Jan 8 10:11:54 mxmx user.warn kernel: disk 0, wo:0, o:1, dev:sdg3
Jan 8 10:11:54 mxmx user.warn kernel: disk 1, wo:1, o:1, dev:sdp3
Jan 8 10:11:54 mxmx user.info kernel: md: delaying recovery of md1 until md0 has finished (they share one or more physical units)
Jan 8 10:11:55 mxmx user.info kernel: md: bind<sdp4>
Jan 8 10:11:55 mxmx user.warn kernel: RAID1 conf printout:
Jan 8 10:11:55 mxmx user.warn kernel: --- wd:1 rd:2
Jan 8 10:11:55 mxmx user.warn kernel: disk 0, wo:0, o:1, dev:sdg4
Jan 8 10:11:55 mxmx user.warn kernel: disk 1, wo:1, o:1, dev:sdp4
Jan 8 10:11:55 mxmx user.info kernel: md: delaying recovery of md2 until md1 has finished (they share one or more physical units)
Jan 8 10:11:56 mxmx user.alert kernel: raid1: Disk failure on sdp1, disabling device.
Jan 8 10:11:56 mxmx user.alert kernel: raid1: Operation continuing on 1 devices.
Jan 8 10:11:56 mxmx user.info kernel: md: md0: recovery done.
Jan 8 10:11:56 mxmx user.info kernel: md: delaying recovery of md2 until md1 has finished (they share one or more physical units)
Jan 8 10:11:56 mxmx user.info kernel: md: delaying recovery of md1 until md2 has finished (they share one or more physical units)
Jan 8 10:11:56 mxmx user.warn kernel: RAID1 conf printout:
Jan 8 10:11:56 mxmx user.warn kernel: --- wd:1 rd:2
Jan 8 10:11:56 mxmx user.warn kernel: disk 0, wo:0, o:1, dev:sdg1
Jan 8 10:11:56 mxmx user.warn kernel: disk 1, wo:1, o:0, dev:sdp1
Jan 8 10:11:56 mxmx user.info kernel: md: recovery of RAID array md2
Jan 8 10:11:56 mxmx user.info kernel: md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
Jan 8 10:11:56 mxmx user.info kernel: md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
Jan 8 10:11:56 mxmx user.info kernel: md: using 128k window, over a total of 4200896 blocks.
Jan 8 10:11:56 mxmx user.warn kernel: RAID1 conf printout:
Jan 8 10:11:56 mxmx user.warn kernel: --- wd:1 rd:2
Jan 8 10:11:56 mxmx user.warn kernel: disk 0, wo:0, o:1, dev:sdg1
Jan 8 10:11:58 mxmx user.info kernel: md: unbind<sdp1>
Jan 8 10:11:58 mxmx user.info kernel: md: export_rdev(sdp1)
Jan 8 10:11:58 mxmx user.alert kernel: raid1: Disk failure on sdp3, disabling device.
Jan 8 10:11:58 mxmx user.alert kernel: raid1: Operation continuing on 1 devices.
Jan 8 10:12:00 mxmx user.warn kernel: md: cannot remove active disk sdp3 from md1 ...
Jan 8 10:12:01 mxmx user.warn kernel: md: cannot remove active disk sdp3 from md1 ...
Jan 8 10:12:02 mxmx user.warn kernel: md: cannot remove active disk sdp3 from md1 ...
Jan 8 10:12:03 mxmx user.alert kernel: raid1: Disk failure on sdp4, disabling device.
Jan 8 10:12:03 mxmx user.alert kernel: raid1: Operation continuing on 1 devices.
Jan 8 10:12:03 mxmx user.info kernel: md: md2: recovery done.
Jan 8 10:12:03 mxmx user.err kernel: md: running bug fix for md1
Jan 8 10:12:03 mxmx user.warn kernel: RAID1 conf printout:
Jan 8 10:12:03 mxmx user.warn kernel: RAID1 conf printout:
Jan 8 10:12:03 mxmx user.warn kernel: --- wd:1 rd:2
Jan 8 10:12:03 mxmx user.warn kernel: disk 0, wo:0, o:1, dev:sdg4
Jan 8 10:12:03 mxmx user.warn kernel: disk 1, wo:1, o:0, dev:sdp4
Jan 8 10:12:03 mxmx user.warn kernel: --- wd:1 rd:2
Jan 8 10:12:03 mxmx user.warn kernel: disk 0, wo:0, o:1, dev:sdg3
Jan 8 10:12:03 mxmx user.warn kernel: disk 1, wo:1, o:0, dev:sdp3
Jan 8 10:12:03 mxmx user.warn kernel: RAID1 conf printout:
Jan 8 10:12:03 mxmx user.warn kernel: --- wd:1 rd:2
Jan 8 10:12:03 mxmx user.warn kernel: RAID1 conf printout:
Jan 8 10:12:03 mxmx user.warn kernel: --- wd:1 rd:2
Jan 8 10:12:03 mxmx user.warn kernel: disk 0, wo:0, o:1, dev:sdg4
Jan 8 10:12:03 mxmx user.warn kernel: disk 0, wo:0, o:1, dev:sdg3
Jan 8 10:12:05 mxmx user.info kernel: md: unbind<sdp4>
Jan 8 10:12:05 mxmx user.info kernel: md: export_rdev(sdp4)
Note the line "md: running bug fix for md1" at 10:12:03 which I added to
your patch inside the 'if' before the 'goto'. Looks like it hit that
code *after* the busy...
Thanks,
Brett
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
