Have you tried attaching the checking process to a specific CPU/Core? It's called Affinity. Also, did you try to reduce the numbers in: /proc/sys/dev/raid/speed_limit_min Keep it as low as possible, and md should drop to that number (I think it's in kB) when the system is being utilized, then go back to /proc/sys/dev/raid/speed_limit_max when it's idle. On Tue, Sep 22, 2009 at 5:59 PM, Lee Howard <faxguy@xxxxxxxxxxxxxxxx> wrote: > Majed B. wrote: >> >> I must have missed that part. It may not work for your case, but worth >> trying. >> >> Perhaps Neil Brown, or someone involved could shed some light on this. >> >> If I remember correctly, those soft lockups were harmless anyway. >> > > Not harmless for production use. Yes, data is not harmed, and yes, the > problem state does recover when the data-check finishes, but during the > data-check the system is virtually unresponsive and all other use of the > system is stalled. > > Thanks, > > Lee. > >> On Tue, Sep 22, 2009 at 5:43 PM, Lee Howard <faxguy@xxxxxxxxxxxxxxxx> >> wrote: >> >>> >>> Thanks Majed, >>> >>> I've looked at the patch and it modifies md/raid5.c. However, I'm using >>> RAID1. Am I ignorant for doubting that the patch to raid5.c has any >>> affect >>> on RAID1? >>> >>> Thanks, >>> >>> Lee. >>> >>> >>> Majed B. wrote: >>> >>>> >>>> Hello, >>>> >>>> Check out the thread with the subject: BUG: soft lockup in >>>> [md4_raid5:21137] >>>> >>>> I think the guys have already fixed this in 2.6.32. The patch is >>>> mentioned in one of the replies, if you wish to try it. >>>> >>>> On Mon, Sep 21, 2009 at 9:08 PM, Lee Howard <faxguy@xxxxxxxxxxxxxxxx> >>>> wrote: >>>> >>>> >>>>> >>>>> Linux software RAID maintainers and developers, >>>>> >>>>> Two months ago I wrote to the Linux kernel mailing list regarding a >>>>> condition expressed as "BUG: soft lockup - CPU#3 stuck for 61s!". I >>>>> initially battled this recurring problem in both Fedora 10 and Fedora >>>>> 11. >>>>> Rafael J. Wysocki suggested that I update the kernel (to 2.6.31-rc4 or >>>>> later) and see if the problem resurfaced. I then used kernel >>>>> 2.6.31-0.94.rc4.fc12.x86_64 and found that the problem still continued, >>>>> but >>>>> noticeably only when the md data-check process was run. >>>>> >>>>> You can read the last post to the LKML thread (with links to the entire >>>>> thread) here: >>>>> >>>>> http://lkml.org/lkml/2009/8/6/387 >>>>> >>>>> The md data-check is being run in Fedora 11 by >>>>> /etc/cron.weekly/raid-check >>>>> which is a little shell script that looks like this: >>>>> >>>>> ------------------------------------------------------ >>>>> #!/bin/bash >>>>> >>>>> for dev in `grep "^md.*: active" /proc/mdstat | cut -f 1 -d ' '`; do >>>>> [ -f /sys/block/$dev/md/sync_action ] && \ >>>>> echo "check" > /sys/block/$dev/md/sync_action >>>>> done >>>>> ------------------------------------------------------ >>>>> >>>>> I have disabled this weekly data-check, and since doing so have not >>>>> encountered any soft lockup (or any other problem, for that matter). >>>>> >>>>> For reference, you can see in this thread here that I am not the only >>>>> one >>>>> to >>>>> have this problem: >>>>> >>>>> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/212684 >>>>> >>>>> It may important to note that I am running a 4-disk RAID1 array on >>>>> 500GB >>>>> Western-Digial SATA drives. I've attached the output of 'lspci -vv' as >>>>> "lspci.out". I've attached the output of 'hdparm -I /dev/sda' as >>>>> "hdparm.out". /dev/sda, /dev/sdb, /dev/sdc, and /dev/sdd are all >>>>> identical >>>>> drive types. I've attached the output of 'for i in 0 1 2; do mdadm >>>>> --detail >>>>> /dev/md$i; done' as "mdadm.out". >>>>> >>>>> Please let me know if this is a configuration problem, a kernel bug, or >>>>> something else. Please let me know how to fix this problem so that I >>>>> can >>>>> safely re-enable md data-check. >>>>> >>>>> Thanks, >>>>> >>>>> Lee. >>>>> >>>>> 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) >>>>> Subsystem: nVidia Corporation Device cb84 >>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR+ FastB2B- DisINTx- >>>>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> Latency: 0 >>>>> Capabilities: [44] HyperTransport: Slave or Primary Interface >>>>> Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL- >>>>> Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- >>>>> <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- >>>>> Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- >>>>> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- >>>>> Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ >>>>> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- >>>>> Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- >>>>> LWI=8bit >>>>> DwFcInEn- LWO=8bit DwFcOutEn- >>>>> Revision ID: 1.03 >>>>> Link Frequency 0: 1.0GHz >>>>> Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- >>>>> Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ >>>>> 500MHz+ >>>>> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- >>>>> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- >>>>> UIDRD- >>>>> Link Frequency 1: 200MHz >>>>> Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- >>>>> Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- >>>>> 500MHz- >>>>> 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- >>>>> Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- >>>>> SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- >>>>> Prefetchable memory behind bridge Upper: 00-00 >>>>> Bus Number: 00 >>>>> Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- >>>>> Mapping Address Base: 00000000fee00000 >>>>> >>>>> 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) >>>>> Subsystem: nVidia Corporation Device cb84 >>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> Latency: 0 >>>>> Region 0: I/O ports at 2f00 [size=128] >>>>> >>>>> 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) >>>>> Subsystem: nVidia Corporation Device cb84 >>>>> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> Interrupt: pin A routed to IRQ 10 >>>>> Region 0: I/O ports at dc00 [size=64] >>>>> Region 4: I/O ports at 2d00 [size=64] >>>>> Region 5: I/O ports at 2e00 [size=64] >>>>> Capabilities: [44] Power Management version 2 >>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >>>>> PME(D0-,D1-,D2-,D3hot+,D3cold+) >>>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>>>> Kernel driver in use: nForce2_smbus >>>>> Kernel modules: i2c-nforce2 >>>>> >>>>> 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev >>>>> a1) >>>>> (prog-if 10 [OHCI]) >>>>> Subsystem: nVidia Corporation Device cb84 >>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> Latency: 0 (750ns min, 250ns max) >>>>> Interrupt: pin A routed to IRQ 22 >>>>> Region 0: Memory at feafb000 (32-bit, non-prefetchable) [size=4K] >>>>> Capabilities: [44] Power Management version 2 >>>>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA >>>>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>>>> Kernel driver in use: ohci_hcd >>>>> >>>>> 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev >>>>> a2) >>>>> (prog-if 20 [EHCI]) >>>>> Subsystem: nVidia Corporation Device cb84 >>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> Latency: 0 (750ns min, 250ns max) >>>>> Interrupt: pin B routed to IRQ 23 >>>>> Region 0: Memory at feafac00 (32-bit, non-prefetchable) [size=256] >>>>> Capabilities: [44] Debug port: BAR=1 offset=0098 >>>>> Capabilities: [80] Power Management version 2 >>>>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA >>>>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>>>> Kernel driver in use: ehci_hcd >>>>> >>>>> 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) (prog-if >>>>> 8a >>>>> [Master SecP PriP]) >>>>> Subsystem: nVidia Corporation Device cb84 >>>>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> Latency: 0 (750ns min, 250ns max) >>>>> Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) >>>>> [size=8] >>>>> Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) >>>>> [size=1] >>>>> Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) >>>>> [size=8] >>>>> Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) >>>>> [size=1] >>>>> Region 4: I/O ports at ffa0 [size=16] >>>>> Capabilities: [44] Power Management version 2 >>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >>>>> PME(D0-,D1-,D2-,D3hot-,D3cold-) >>>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>>>> Kernel driver in use: pata_amd >>>>> Kernel modules: ata_generic, pata_acpi, pata_amd >>>>> >>>>> 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev >>>>> a3) >>>>> (prog-if 85 [Master SecO PriO]) >>>>> Subsystem: nVidia Corporation Device cb84 >>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> Latency: 0 (750ns min, 250ns max) >>>>> Interrupt: pin A routed to IRQ 21 >>>>> Region 0: I/O ports at d480 [size=8] >>>>> Region 1: I/O ports at d400 [size=4] >>>>> Region 2: I/O ports at d080 [size=8] >>>>> Region 3: I/O ports at d000 [size=4] >>>>> Region 4: I/O ports at cc00 [size=16] >>>>> Region 5: Memory at feaf9000 (32-bit, non-prefetchable) [size=4K] >>>>> Capabilities: [44] Power Management version 2 >>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >>>>> PME(D0-,D1-,D2-,D3hot-,D3cold-) >>>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>>>> Capabilities: [b0] MSI: Mask- 64bit+ Count=1/4 Enable- >>>>> Address: 0000000000000000 Data: 0000 >>>>> Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ >>>>> Kernel driver in use: sata_nv >>>>> Kernel modules: ata_generic, pata_acpi, sata_nv >>>>> >>>>> 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev >>>>> a3) >>>>> (prog-if 85 [Master SecO PriO]) >>>>> Subsystem: nVidia Corporation Device cb84 >>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> Latency: 0 (750ns min, 250ns max) >>>>> Interrupt: pin B routed to IRQ 20 >>>>> Region 0: I/O ports at c880 [size=8] >>>>> Region 1: I/O ports at c800 [size=4] >>>>> Region 2: I/O ports at c480 [size=8] >>>>> Region 3: I/O ports at c400 [size=4] >>>>> Region 4: I/O ports at c080 [size=16] >>>>> Region 5: Memory at feaf8000 (32-bit, non-prefetchable) [size=4K] >>>>> Capabilities: [44] Power Management version 2 >>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >>>>> PME(D0-,D1-,D2-,D3hot-,D3cold-) >>>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>>>> Capabilities: [b0] MSI: Mask- 64bit+ Count=1/4 Enable- >>>>> Address: 0000000000000000 Data: 0000 >>>>> Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ >>>>> Kernel driver in use: sata_nv >>>>> Kernel modules: ata_generic, pata_acpi, sata_nv >>>>> >>>>> 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev >>>>> a3) >>>>> (prog-if 85 [Master SecO PriO]) >>>>> Subsystem: nVidia Corporation Device cb84 >>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> Latency: 0 (750ns min, 250ns max) >>>>> Interrupt: pin C routed to IRQ 23 >>>>> Region 0: I/O ports at c000 [size=8] >>>>> Region 1: I/O ports at bc00 [size=4] >>>>> Region 2: I/O ports at b880 [size=8] >>>>> Region 3: I/O ports at b800 [size=4] >>>>> Region 4: I/O ports at b480 [size=16] >>>>> Region 5: Memory at feaf7000 (32-bit, non-prefetchable) [size=4K] >>>>> Capabilities: [44] Power Management version 2 >>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >>>>> PME(D0-,D1-,D2-,D3hot-,D3cold-) >>>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>>>> Capabilities: [b0] MSI: Mask- 64bit+ Count=1/4 Enable- >>>>> Address: 0000000000000000 Data: 0000 >>>>> Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ >>>>> Kernel driver in use: sata_nv >>>>> Kernel modules: ata_generic, pata_acpi, sata_nv >>>>> >>>>> 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) >>>>> (prog-if >>>>> 01 >>>>> [Subtractive decode]) >>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> Latency: 0 >>>>> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 >>>>> I/O behind bridge: 0000e000-0000efff >>>>> Memory behind bridge: feb00000-febfffff >>>>> Prefetchable memory behind bridge: f8000000-fbffffff >>>>> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- >>>>> <TAbort- <MAbort- <SERR- <PERR- >>>>> BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- >>>>> PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- >>>>> Capabilities: [b8] Subsystem: nVidia Corporation Device cb84 >>>>> Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- >>>>> Mapping Address Base: 00000000fee00000 >>>>> >>>>> 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) >>>>> Subsystem: nVidia Corporation Device cb84 >>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx+ >>>>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> Latency: 0 (250ns min, 5000ns max) >>>>> Interrupt: pin A routed to IRQ 30 >>>>> Region 0: Memory at feaf6000 (32-bit, non-prefetchable) [size=4K] >>>>> Region 1: I/O ports at b400 [size=8] >>>>> Region 2: Memory at feafa800 (32-bit, non-prefetchable) [size=256] >>>>> Region 3: Memory at feafa400 (32-bit, non-prefetchable) [size=16] >>>>> Capabilities: [44] Power Management version 2 >>>>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA >>>>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>>>> Status: D0 PME-Enable+ DSel=0 DScale=0 PME- >>>>> Capabilities: [70] MSI-X: Enable- Mask- TabSize=8 >>>>> Vector table: BAR=2 offset=00000000 >>>>> PBA: BAR=3 offset=00000000 >>>>> Capabilities: [50] MSI: Mask+ 64bit+ Count=1/8 Enable+ >>>>> Address: 00000000fee0400c Data: 4199 >>>>> Masking: 000000fe Pending: 00000000 >>>>> Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ >>>>> Kernel driver in use: forcedeth >>>>> Kernel modules: forcedeth >>>>> >>>>> 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) >>>>> Subsystem: nVidia Corporation Device cb84 >>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx+ >>>>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> Latency: 0 (250ns min, 5000ns max) >>>>> Interrupt: pin A routed to IRQ 31 >>>>> Region 0: Memory at feaf5000 (32-bit, non-prefetchable) [size=4K] >>>>> Region 1: I/O ports at b080 [size=8] >>>>> Region 2: Memory at feafa000 (32-bit, non-prefetchable) [size=256] >>>>> Region 3: Memory at feaf4c00 (32-bit, non-prefetchable) [size=16] >>>>> Capabilities: [44] Power Management version 2 >>>>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA >>>>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>>>> Status: D0 PME-Enable+ DSel=0 DScale=0 PME- >>>>> Capabilities: [70] MSI-X: Enable- Mask- TabSize=8 >>>>> Vector table: BAR=2 offset=00000000 >>>>> PBA: BAR=3 offset=00000000 >>>>> Capabilities: [50] MSI: Mask+ 64bit+ Count=1/8 Enable+ >>>>> Address: 00000000fee0200c Data: 41a1 >>>>> Masking: 000000fe Pending: 00000000 >>>>> Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ >>>>> Kernel driver in use: forcedeth >>>>> Kernel modules: forcedeth >>>>> >>>>> 00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev >>>>> a3) >>>>> (prog-if 00 [Normal decode]) >>>>> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx+ >>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> Latency: 0, Cache Line Size: 64 bytes >>>>> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 >>>>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- <SERR- <PERR- >>>>> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- >>>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >>>>> Capabilities: [40] Subsystem: nVidia Corporation Device 0000 >>>>> Capabilities: [48] Power Management version 2 >>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >>>>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>>>> Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+ >>>>> Address: 00000000fee0f00c Data: 4149 >>>>> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- >>>>> Mapping Address Base: 00000000fee00000 >>>>> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 >>>>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s >>>>> <64ns, >>>>> L1 <1us >>>>> ExtTag- RBE+ FLReset- >>>>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- >>>>> Unsupported- >>>>> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ >>>>> MaxPayload 128 bytes, MaxReadReq 512 bytes >>>>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- >>>>> TransPend- >>>>> LnkCap: Port #5, Speed 2.5GT/s, Width x8, ASPM L0s L1, >>>>> Latency L0 <512ns, L1 <4us >>>>> ClockPM- Surprise- LLActRep+ BwNot- >>>>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- >>>>> CommClk- >>>>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >>>>> LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ >>>>> DLActive- BWMgmt- ABWMgmt- >>>>> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- >>>>> Surpise- >>>>> Slot # 0, PowerLimit 0.000000; Interlock- >>>>> NoCompl- >>>>> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- >>>>> HPIrq- LinkChg- >>>>> Control: AttnInd Off, PwrInd On, Power- Interlock- >>>>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- >>>>> Interlock- >>>>> Changed: MRL- PresDet- LinkState- >>>>> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- >>>>> PMEIntEna- >>>>> CRSVisible- >>>>> RootCap: CRSVisible- >>>>> RootSta: PME ReqID 0000, PMEStatus- PMEPending- >>>>> Capabilities: [100] Virtual Channel <?> >>>>> Kernel driver in use: pcieport-driver >>>>> Kernel modules: shpchp >>>>> >>>>> 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev >>>>> a3) >>>>> (prog-if 00 [Normal decode]) >>>>> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx+ >>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> Latency: 0, Cache Line Size: 64 bytes >>>>> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 >>>>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- <SERR- <PERR- >>>>> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- >>>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >>>>> Capabilities: [40] Subsystem: nVidia Corporation Device 0000 >>>>> Capabilities: [48] Power Management version 2 >>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >>>>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>>>> Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+ >>>>> Address: 00000000fee0f00c Data: 4151 >>>>> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- >>>>> Mapping Address Base: 00000000fee00000 >>>>> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 >>>>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s >>>>> <64ns, >>>>> L1 <1us >>>>> ExtTag- RBE+ FLReset- >>>>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- >>>>> Unsupported- >>>>> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ >>>>> MaxPayload 128 bytes, MaxReadReq 512 bytes >>>>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- >>>>> TransPend- >>>>> LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, >>>>> Latency L0 <512ns, L1 <4us >>>>> ClockPM- Surprise- LLActRep+ BwNot- >>>>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- >>>>> CommClk- >>>>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >>>>> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ >>>>> DLActive- BWMgmt- ABWMgmt- >>>>> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- >>>>> Surpise- >>>>> Slot # 0, PowerLimit 0.000000; Interlock- >>>>> NoCompl- >>>>> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- >>>>> HPIrq- LinkChg- >>>>> Control: AttnInd Off, PwrInd On, Power- Interlock- >>>>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- >>>>> Interlock- >>>>> Changed: MRL- PresDet- LinkState- >>>>> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- >>>>> PMEIntEna- >>>>> CRSVisible- >>>>> RootCap: CRSVisible- >>>>> RootSta: PME ReqID 0000, PMEStatus- PMEPending- >>>>> Capabilities: [100] Virtual Channel <?> >>>>> Kernel driver in use: pcieport-driver >>>>> Kernel modules: shpchp >>>>> >>>>> 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev >>>>> a3) >>>>> (prog-if 00 [Normal decode]) >>>>> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx+ >>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> Latency: 0, Cache Line Size: 64 bytes >>>>> Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 >>>>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- <SERR- <PERR- >>>>> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- >>>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >>>>> Capabilities: [40] Subsystem: nVidia Corporation Device 0000 >>>>> Capabilities: [48] Power Management version 2 >>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >>>>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>>>> Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+ >>>>> Address: 00000000fee0f00c Data: 4159 >>>>> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- >>>>> Mapping Address Base: 00000000fee00000 >>>>> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 >>>>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s >>>>> <64ns, >>>>> L1 <1us >>>>> ExtTag- RBE+ FLReset- >>>>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- >>>>> Unsupported- >>>>> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ >>>>> MaxPayload 128 bytes, MaxReadReq 512 bytes >>>>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- >>>>> TransPend- >>>>> LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, >>>>> Latency L0 <512ns, L1 <4us >>>>> ClockPM- Surprise- LLActRep+ BwNot- >>>>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- >>>>> CommClk- >>>>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >>>>> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ >>>>> DLActive- BWMgmt- ABWMgmt- >>>>> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- >>>>> Surpise- >>>>> Slot # 0, PowerLimit 0.000000; Interlock- >>>>> NoCompl- >>>>> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- >>>>> HPIrq- LinkChg- >>>>> Control: AttnInd Off, PwrInd On, Power- Interlock- >>>>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- >>>>> Interlock- >>>>> Changed: MRL- PresDet- LinkState- >>>>> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- >>>>> PMEIntEna- >>>>> CRSVisible- >>>>> RootCap: CRSVisible- >>>>> RootSta: PME ReqID 0000, PMEStatus- PMEPending- >>>>> Capabilities: [100] Virtual Channel <?> >>>>> Kernel driver in use: pcieport-driver >>>>> Kernel modules: shpchp >>>>> >>>>> 00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev >>>>> a3) >>>>> (prog-if 00 [Normal decode]) >>>>> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx+ >>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> Latency: 0, Cache Line Size: 64 bytes >>>>> Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 >>>>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- <SERR- <PERR- >>>>> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- >>>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >>>>> Capabilities: [40] Subsystem: nVidia Corporation Device 0000 >>>>> Capabilities: [48] Power Management version 2 >>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >>>>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>>>> Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+ >>>>> Address: 00000000fee0f00c Data: 4161 >>>>> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- >>>>> Mapping Address Base: 00000000fee00000 >>>>> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 >>>>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s >>>>> <64ns, >>>>> L1 <1us >>>>> ExtTag- RBE+ FLReset- >>>>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- >>>>> Unsupported- >>>>> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ >>>>> MaxPayload 128 bytes, MaxReadReq 512 bytes >>>>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- >>>>> TransPend- >>>>> LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, >>>>> Latency L0 <512ns, L1 <4us >>>>> ClockPM- Surprise- LLActRep+ BwNot- >>>>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- >>>>> CommClk- >>>>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >>>>> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ >>>>> DLActive- BWMgmt- ABWMgmt- >>>>> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- >>>>> Surpise- >>>>> Slot # 0, PowerLimit 0.000000; Interlock- >>>>> NoCompl- >>>>> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- >>>>> HPIrq- LinkChg- >>>>> Control: AttnInd Off, PwrInd On, Power- Interlock- >>>>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- >>>>> Interlock- >>>>> Changed: MRL- PresDet- LinkState- >>>>> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- >>>>> PMEIntEna- >>>>> CRSVisible- >>>>> RootCap: CRSVisible- >>>>> RootSta: PME ReqID 0000, PMEStatus- PMEPending- >>>>> Capabilities: [100] Virtual Channel <?> >>>>> Kernel driver in use: pcieport-driver >>>>> Kernel modules: shpchp >>>>> >>>>> 00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev >>>>> a3) >>>>> (prog-if 00 [Normal decode]) >>>>> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx+ >>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> Latency: 0, Cache Line Size: 64 bytes >>>>> Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 >>>>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- <SERR- <PERR- >>>>> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- >>>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >>>>> Capabilities: [40] Subsystem: nVidia Corporation Device 0000 >>>>> Capabilities: [48] Power Management version 2 >>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >>>>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>>>> Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+ >>>>> Address: 00000000fee0f00c Data: 4169 >>>>> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- >>>>> Mapping Address Base: 00000000fee00000 >>>>> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 >>>>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s >>>>> <64ns, >>>>> L1 <1us >>>>> ExtTag- RBE+ FLReset- >>>>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- >>>>> Unsupported- >>>>> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ >>>>> MaxPayload 128 bytes, MaxReadReq 512 bytes >>>>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- >>>>> TransPend- >>>>> LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, >>>>> Latency L0 <512ns, L1 <4us >>>>> ClockPM- Surprise- LLActRep+ BwNot- >>>>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- >>>>> CommClk- >>>>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >>>>> LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ >>>>> DLActive- BWMgmt- ABWMgmt- >>>>> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- >>>>> Surpise- >>>>> Slot # 0, PowerLimit 0.000000; Interlock- >>>>> NoCompl- >>>>> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- >>>>> HPIrq- LinkChg- >>>>> Control: AttnInd Off, PwrInd On, Power- Interlock- >>>>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- >>>>> Interlock- >>>>> Changed: MRL- PresDet- LinkState- >>>>> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- >>>>> PMEIntEna- >>>>> CRSVisible- >>>>> RootCap: CRSVisible- >>>>> RootSta: PME ReqID 0000, PMEStatus- PMEPending- >>>>> Capabilities: [100] Virtual Channel <?> >>>>> Kernel driver in use: pcieport-driver >>>>> Kernel modules: shpchp >>>>> >>>>> 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev >>>>> a3) >>>>> (prog-if 00 [Normal decode]) >>>>> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx+ >>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> Latency: 0, Cache Line Size: 64 bytes >>>>> Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 >>>>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- <SERR- <PERR- >>>>> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- >>>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >>>>> Capabilities: [40] Subsystem: nVidia Corporation Device 0000 >>>>> Capabilities: [48] Power Management version 2 >>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >>>>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>>>> Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+ >>>>> Address: 00000000fee0f00c Data: 4171 >>>>> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- >>>>> Mapping Address Base: 00000000fee00000 >>>>> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 >>>>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s >>>>> <64ns, >>>>> L1 <1us >>>>> ExtTag- RBE+ FLReset- >>>>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- >>>>> Unsupported- >>>>> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ >>>>> MaxPayload 128 bytes, MaxReadReq 512 bytes >>>>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- >>>>> TransPend- >>>>> LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, >>>>> Latency L0 <512ns, L1 <4us >>>>> ClockPM- Surprise- LLActRep+ BwNot- >>>>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- >>>>> CommClk- >>>>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >>>>> LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ >>>>> DLActive- BWMgmt- ABWMgmt- >>>>> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- >>>>> Surpise- >>>>> Slot # 0, PowerLimit 0.000000; Interlock- >>>>> NoCompl- >>>>> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- >>>>> HPIrq- LinkChg- >>>>> Control: AttnInd Off, PwrInd On, Power- Interlock- >>>>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- >>>>> Interlock- >>>>> Changed: MRL- PresDet- LinkState- >>>>> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- >>>>> PMEIntEna- >>>>> CRSVisible- >>>>> RootCap: CRSVisible- >>>>> RootSta: PME ReqID 0000, PMEStatus- PMEPending- >>>>> Capabilities: [100] Virtual Channel <?> >>>>> Kernel driver in use: pcieport-driver >>>>> Kernel modules: shpchp >>>>> >>>>> 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, >>>>> Athlon64, Sempron] HyperTransport Configuration >>>>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> Capabilities: [80] HyperTransport: Host or Secondary Interface >>>>> Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ >>>>> Slave- <EOCErr- DUL- >>>>> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- >>>>> <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- >>>>> Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- >>>>> LWI=16bit >>>>> DwFcInEn- LWO=16bit DwFcOutEn- >>>>> Revision ID: 3.00 >>>>> Link Frequency: 1.0GHz >>>>> Link Error: <Prot- <Ovfl- <EOC- CTLTm- >>>>> Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- >>>>> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- >>>>> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ >>>>> UIDRD- ExtRS- UCnfE- >>>>> >>>>> 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, >>>>> Athlon64, Sempron] Address Map >>>>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> >>>>> 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, >>>>> Athlon64, Sempron] DRAM Controller >>>>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> Kernel modules: amd64_edac_mod >>>>> >>>>> 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, >>>>> Athlon64, Sempron] Miscellaneous Control >>>>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> Capabilities: [f0] Secure device <?> >>>>> >>>>> 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, >>>>> Athlon64, Sempron] Link Control >>>>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> >>>>> 01:0a.0 VGA compatible controller: XGI Technology Inc. (eXtreme >>>>> Graphics >>>>> Innovation) Volari Z7/Z9/Z9s (prog-if 00 [VGA controller]) >>>>> Subsystem: XGI Technology Inc. (eXtreme Graphics Innovation) >>>>> Volari >>>>> Z7/Z9/Z9s >>>>> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> BIST result: 00 >>>>> Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] >>>>> Region 1: Memory at febc0000 (32-bit, non-prefetchable) >>>>> [size=256K] >>>>> Region 2: I/O ports at ec00 [size=128] >>>>> Expansion ROM at <unassigned> [disabled] >>>>> Capabilities: [40] Power Management version 2 >>>>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA >>>>> PME(D0-,D1-,D2-,D3hot-,D3cold-) >>>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>>>> >>>>> >>>>> >>>>> /dev/sda: >>>>> >>>>> ATA device, with non-removable media >>>>> Model Number: WDC WD5000AAKS-00A7B2 >>>>> Serial Number: WD-WCASZ0321108 >>>>> Firmware Revision: 01.03B01 >>>>> Transport: Serial, SATA 1.0a, SATA II Extensions, SATA >>>>> Rev >>>>> 2.5 >>>>> Standards: >>>>> Supported: 8 7 6 5 >>>>> Likely used: 8 >>>>> Configuration: >>>>> Logical max current >>>>> cylinders 16383 16383 >>>>> heads 16 16 >>>>> sectors/track 63 63 >>>>> -- >>>>> CHS current addressable sectors: 16514064 >>>>> LBA user addressable sectors: 268435455 >>>>> LBA48 user addressable sectors: 976773168 >>>>> Logical/Physical Sector size: 512 bytes >>>>> device size with M = 1024*1024: 476940 MBytes >>>>> device size with M = 1000*1000: 500107 MBytes (500 GB) >>>>> cache/buffer size = 16384 KBytes >>>>> Capabilities: >>>>> LBA, IORDY(can be disabled) >>>>> Queue depth: 32 >>>>> Standby timer values: spec'd by Standard, with device specific >>>>> minimum >>>>> R/W multiple sector transfer: Max = 16 Current = 16 >>>>> Recommended acoustic management value: 128, current value: 254 >>>>> DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 >>>>> Cycle time: min=120ns recommended=120ns >>>>> PIO: pio0 pio1 pio2 pio3 pio4 >>>>> Cycle time: no flow control=120ns IORDY flow control=120ns >>>>> Commands/features: >>>>> Enabled Supported: >>>>> * SMART feature set >>>>> Security Mode feature set >>>>> * Power Management feature set >>>>> * Write cache >>>>> * Look-ahead >>>>> * Host Protected Area feature set >>>>> * WRITE_BUFFER command >>>>> * READ_BUFFER command >>>>> * NOP cmd >>>>> * DOWNLOAD_MICROCODE >>>>> Power-Up In Standby feature set >>>>> * SET_FEATURES required to spinup after power up >>>>> SET_MAX security extension >>>>> Automatic Acoustic Management feature set >>>>> * 48-bit Address feature set >>>>> * Device Configuration Overlay feature set >>>>> * Mandatory FLUSH_CACHE >>>>> * FLUSH_CACHE_EXT >>>>> * SMART error logging >>>>> * SMART self-test >>>>> * General Purpose Logging feature set >>>>> * 64-bit World wide name >>>>> * Segmented DOWNLOAD_MICROCODE >>>>> * Gen1 signaling speed (1.5Gb/s) >>>>> * Gen2 signaling speed (3.0Gb/s) >>>>> * Native Command Queueing (NCQ) >>>>> * Host-initiated interface power management >>>>> * Phy event counters >>>>> DMA Setup Auto-Activate optimization >>>>> * Software settings preservation >>>>> * SMART Command Transport (SCT) feature set >>>>> * SCT Long Sector Access (AC1) >>>>> * SCT LBA Segment Access (AC2) >>>>> * SCT Error Recovery Control (AC3) >>>>> * SCT Features Control (AC4) >>>>> * SCT Data Tables (AC5) >>>>> unknown 206[12] (vendor specific) >>>>> unknown 206[13] (vendor specific) >>>>> Security: >>>>> Master password revision code = 65534 >>>>> supported >>>>> not enabled >>>>> not locked >>>>> frozen >>>>> not expired: security count >>>>> supported: enhanced erase >>>>> 84min for SECURITY ERASE UNIT. 84min for ENHANCED SECURITY ERASE >>>>> UNIT. >>>>> Logical Unit WWN Device Identifier: 50014ee101cedc24 >>>>> NAA : 5 >>>>> IEEE OUI : 0014ee >>>>> Unique ID : 101cedc24 >>>>> Checksum: correct >>>>> >>>>> /dev/md0: >>>>> Version : 0.90 >>>>> Creation Time : Mon Jul 27 22:38:26 2009 >>>>> Raid Level : raid1 >>>>> Array Size : 102336 (99.95 MiB 104.79 MB) >>>>> Used Dev Size : 102336 (99.95 MiB 104.79 MB) >>>>> Raid Devices : 4 >>>>> Total Devices : 4 >>>>> Preferred Minor : 0 >>>>> Persistence : Superblock is persistent >>>>> >>>>> Update Time : Mon Sep 21 11:02:14 2009 >>>>> State : clean >>>>> Active Devices : 4 >>>>> Working Devices : 4 >>>>> Failed Devices : 0 >>>>> Spare Devices : 0 >>>>> >>>>> UUID : 9037def2:035b0d10:bfe78010:bc810f04 >>>>> Events : 0.44 >>>>> >>>>> Number Major Minor RaidDevice State >>>>> 0 8 1 0 active sync /dev/sda1 >>>>> 1 8 17 1 active sync /dev/sdb1 >>>>> 2 8 33 2 active sync /dev/sdc1 >>>>> 3 8 49 3 active sync /dev/sdd1 >>>>> /dev/md1: >>>>> Version : 0.90 >>>>> Creation Time : Mon Jul 27 22:38:28 2009 >>>>> Raid Level : raid1 >>>>> Array Size : 4095936 (3.91 GiB 4.19 GB) >>>>> Used Dev Size : 4095936 (3.91 GiB 4.19 GB) >>>>> Raid Devices : 4 >>>>> Total Devices : 4 >>>>> Preferred Minor : 1 >>>>> Persistence : Superblock is persistent >>>>> >>>>> Update Time : Mon Sep 21 11:02:14 2009 >>>>> State : clean >>>>> Active Devices : 4 >>>>> Working Devices : 4 >>>>> Failed Devices : 0 >>>>> Spare Devices : 0 >>>>> >>>>> UUID : 642c2833:bf033a7d:bfe78010:bc810f04 >>>>> Events : 0.44 >>>>> >>>>> Number Major Minor RaidDevice State >>>>> 0 8 2 0 active sync /dev/sda2 >>>>> 1 8 18 1 active sync /dev/sdb2 >>>>> 2 8 34 2 active sync /dev/sdc2 >>>>> 3 8 50 3 active sync /dev/sdd2 >>>>> /dev/md2: >>>>> Version : 0.90 >>>>> Creation Time : Mon Jul 27 22:38:30 2009 >>>>> Raid Level : raid1 >>>>> Array Size : 484185536 (461.76 GiB 495.81 GB) >>>>> Used Dev Size : 484185536 (461.76 GiB 495.81 GB) >>>>> Raid Devices : 4 >>>>> Total Devices : 4 >>>>> Preferred Minor : 2 >>>>> Persistence : Superblock is persistent >>>>> >>>>> Update Time : Mon Sep 21 11:02:24 2009 >>>>> State : clean >>>>> Active Devices : 4 >>>>> Working Devices : 4 >>>>> Failed Devices : 0 >>>>> Spare Devices : 0 >>>>> >>>>> UUID : ce106d52:0c0373f7:bfe78010:bc810f04 >>>>> Events : 0.66 >>>>> >>>>> Number Major Minor RaidDevice State >>>>> 0 8 3 0 active sync /dev/sda3 >>>>> 1 8 19 1 active sync /dev/sdb3 >>>>> 2 8 35 2 active sync /dev/sdc3 >>>>> 3 8 51 3 active sync /dev/sdd3 >>>>> >>>>> >>>>> >>>>> >>>> >>>> >>>> >>> >>> >> >> >> >> > > -- Majed B. -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
