Hello, Check out the thread with the subject: BUG: soft lockup in [md4_raid5:21137] I think the guys have already fixed this in 2.6.32. The patch is mentioned in one of the replies, if you wish to try it. On Mon, Sep 21, 2009 at 9:08 PM, Lee Howard <faxguy@xxxxxxxxxxxxxxxx> wrote: > Linux software RAID maintainers and developers, > > Two months ago I wrote to the Linux kernel mailing list regarding a > condition expressed as "BUG: soft lockup - CPU#3 stuck for 61s!". I > initially battled this recurring problem in both Fedora 10 and Fedora 11. > Rafael J. Wysocki suggested that I update the kernel (to 2.6.31-rc4 or > later) and see if the problem resurfaced. I then used kernel > 2.6.31-0.94.rc4.fc12.x86_64 and found that the problem still continued, but > noticeably only when the md data-check process was run. > > You can read the last post to the LKML thread (with links to the entire > thread) here: > > http://lkml.org/lkml/2009/8/6/387 > > The md data-check is being run in Fedora 11 by /etc/cron.weekly/raid-check > which is a little shell script that looks like this: > > ------------------------------------------------------ > #!/bin/bash > > for dev in `grep "^md.*: active" /proc/mdstat | cut -f 1 -d ' '`; do > [ -f /sys/block/$dev/md/sync_action ] && \ > echo "check" > /sys/block/$dev/md/sync_action > done > ------------------------------------------------------ > > I have disabled this weekly data-check, and since doing so have not > encountered any soft lockup (or any other problem, for that matter). > > For reference, you can see in this thread here that I am not the only one to > have this problem: > > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/212684 > > It may important to note that I am running a 4-disk RAID1 array on 500GB > Western-Digial SATA drives. I've attached the output of 'lspci -vv' as > "lspci.out". I've attached the output of 'hdparm -I /dev/sda' as > "hdparm.out". /dev/sda, /dev/sdb, /dev/sdc, and /dev/sdd are all identical > drive types. I've attached the output of 'for i in 0 1 2; do mdadm --detail > /dev/md$i; done' as "mdadm.out". > > Please let me know if this is a configuration problem, a kernel bug, or > something else. Please let me know how to fix this problem so that I can > safely re-enable md data-check. > > Thanks, > > Lee. > > 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) > Subsystem: nVidia Corporation Device cb84 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Capabilities: [44] HyperTransport: Slave or Primary Interface > Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL- > Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- > <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- > Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- > LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- > Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ > <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- > Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit > DwFcInEn- LWO=8bit DwFcOutEn- > Revision ID: 1.03 > Link Frequency 0: 1.0GHz > Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- > Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ > 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- > Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- > UIDRD- > Link Frequency 1: 200MHz > Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- > Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- > 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- > Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- > SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- > Prefetchable memory behind bridge Upper: 00-00 > Bus Number: 00 > Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- > Mapping Address Base: 00000000fee00000 > > 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) > Subsystem: nVidia Corporation Device cb84 > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Region 0: I/O ports at 2f00 [size=128] > > 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) > Subsystem: nVidia Corporation Device cb84 > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 10 > Region 0: I/O ports at dc00 [size=64] > Region 4: I/O ports at 2d00 [size=64] > Region 5: I/O ports at 2e00 [size=64] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: nForce2_smbus > Kernel modules: i2c-nforce2 > > 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) > (prog-if 10 [OHCI]) > Subsystem: nVidia Corporation Device cb84 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 (750ns min, 250ns max) > Interrupt: pin A routed to IRQ 22 > Region 0: Memory at feafb000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: ohci_hcd > > 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) > (prog-if 20 [EHCI]) > Subsystem: nVidia Corporation Device cb84 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 (750ns min, 250ns max) > Interrupt: pin B routed to IRQ 23 > Region 0: Memory at feafac00 (32-bit, non-prefetchable) [size=256] > Capabilities: [44] Debug port: BAR=1 offset=0098 > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: ehci_hcd > > 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) (prog-if 8a > [Master SecP PriP]) > Subsystem: nVidia Corporation Device cb84 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 (750ns min, 250ns max) > Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) > [size=8] > Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) > [size=1] > Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) > [size=8] > Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) > [size=1] > Region 4: I/O ports at ffa0 [size=16] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: pata_amd > Kernel modules: ata_generic, pata_acpi, pata_amd > > 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) > (prog-if 85 [Master SecO PriO]) > Subsystem: nVidia Corporation Device cb84 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 (750ns min, 250ns max) > Interrupt: pin A routed to IRQ 21 > Region 0: I/O ports at d480 [size=8] > Region 1: I/O ports at d400 [size=4] > Region 2: I/O ports at d080 [size=8] > Region 3: I/O ports at d000 [size=4] > Region 4: I/O ports at cc00 [size=16] > Region 5: Memory at feaf9000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [b0] MSI: Mask- 64bit+ Count=1/4 Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ > Kernel driver in use: sata_nv > Kernel modules: ata_generic, pata_acpi, sata_nv > > 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) > (prog-if 85 [Master SecO PriO]) > Subsystem: nVidia Corporation Device cb84 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 (750ns min, 250ns max) > Interrupt: pin B routed to IRQ 20 > Region 0: I/O ports at c880 [size=8] > Region 1: I/O ports at c800 [size=4] > Region 2: I/O ports at c480 [size=8] > Region 3: I/O ports at c400 [size=4] > Region 4: I/O ports at c080 [size=16] > Region 5: Memory at feaf8000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [b0] MSI: Mask- 64bit+ Count=1/4 Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ > Kernel driver in use: sata_nv > Kernel modules: ata_generic, pata_acpi, sata_nv > > 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) > (prog-if 85 [Master SecO PriO]) > Subsystem: nVidia Corporation Device cb84 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 (750ns min, 250ns max) > Interrupt: pin C routed to IRQ 23 > Region 0: I/O ports at c000 [size=8] > Region 1: I/O ports at bc00 [size=4] > Region 2: I/O ports at b880 [size=8] > Region 3: I/O ports at b800 [size=4] > Region 4: I/O ports at b480 [size=16] > Region 5: Memory at feaf7000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [b0] MSI: Mask- 64bit+ Count=1/4 Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ > Kernel driver in use: sata_nv > Kernel modules: ata_generic, pata_acpi, sata_nv > > 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) (prog-if 01 > [Subtractive decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 > I/O behind bridge: 0000e000-0000efff > Memory behind bridge: feb00000-febfffff > Prefetchable memory behind bridge: f8000000-fbffffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- > Capabilities: [b8] Subsystem: nVidia Corporation Device cb84 > Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- > Mapping Address Base: 00000000fee00000 > > 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) > Subsystem: nVidia Corporation Device cb84 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 (250ns min, 5000ns max) > Interrupt: pin A routed to IRQ 30 > Region 0: Memory at feaf6000 (32-bit, non-prefetchable) [size=4K] > Region 1: I/O ports at b400 [size=8] > Region 2: Memory at feafa800 (32-bit, non-prefetchable) [size=256] > Region 3: Memory at feafa400 (32-bit, non-prefetchable) [size=16] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable+ DSel=0 DScale=0 PME- > Capabilities: [70] MSI-X: Enable- Mask- TabSize=8 > Vector table: BAR=2 offset=00000000 > PBA: BAR=3 offset=00000000 > Capabilities: [50] MSI: Mask+ 64bit+ Count=1/8 Enable+ > Address: 00000000fee0400c Data: 4199 > Masking: 000000fe Pending: 00000000 > Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ > Kernel driver in use: forcedeth > Kernel modules: forcedeth > > 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) > Subsystem: nVidia Corporation Device cb84 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 (250ns min, 5000ns max) > Interrupt: pin A routed to IRQ 31 > Region 0: Memory at feaf5000 (32-bit, non-prefetchable) [size=4K] > Region 1: I/O ports at b080 [size=8] > Region 2: Memory at feafa000 (32-bit, non-prefetchable) [size=256] > Region 3: Memory at feaf4c00 (32-bit, non-prefetchable) [size=16] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable+ DSel=0 DScale=0 PME- > Capabilities: [70] MSI-X: Enable- Mask- TabSize=8 > Vector table: BAR=2 offset=00000000 > PBA: BAR=3 offset=00000000 > Capabilities: [50] MSI: Mask+ 64bit+ Count=1/8 Enable+ > Address: 00000000fee0200c Data: 41a1 > Masking: 000000fe Pending: 00000000 > Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ > Kernel driver in use: forcedeth > Kernel modules: forcedeth > > 00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) > (prog-if 00 [Normal decode]) > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Subsystem: nVidia Corporation Device 0000 > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+ > Address: 00000000fee0f00c Data: 4149 > Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- > Mapping Address Base: 00000000fee00000 > Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #5, Speed 2.5GT/s, Width x8, ASPM L0s L1, > Latency L0 <512ns, L1 <4us > ClockPM- Surprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- > CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- > Surpise- > Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- > HPIrq- LinkChg- > Control: AttnInd Off, PwrInd On, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- > Interlock- > Changed: MRL- PresDet- LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [100] Virtual Channel <?> > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > > 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) > (prog-if 00 [Normal decode]) > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Subsystem: nVidia Corporation Device 0000 > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+ > Address: 00000000fee0f00c Data: 4151 > Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- > Mapping Address Base: 00000000fee00000 > Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, > Latency L0 <512ns, L1 <4us > ClockPM- Surprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- > CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- > Surpise- > Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- > HPIrq- LinkChg- > Control: AttnInd Off, PwrInd On, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- > Interlock- > Changed: MRL- PresDet- LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [100] Virtual Channel <?> > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > > 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) > (prog-if 00 [Normal decode]) > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Subsystem: nVidia Corporation Device 0000 > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+ > Address: 00000000fee0f00c Data: 4159 > Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- > Mapping Address Base: 00000000fee00000 > Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, > Latency L0 <512ns, L1 <4us > ClockPM- Surprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- > CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- > Surpise- > Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- > HPIrq- LinkChg- > Control: AttnInd Off, PwrInd On, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- > Interlock- > Changed: MRL- PresDet- LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [100] Virtual Channel <?> > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > > 00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) > (prog-if 00 [Normal decode]) > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Subsystem: nVidia Corporation Device 0000 > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+ > Address: 00000000fee0f00c Data: 4161 > Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- > Mapping Address Base: 00000000fee00000 > Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, > Latency L0 <512ns, L1 <4us > ClockPM- Surprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- > CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- > Surpise- > Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- > HPIrq- LinkChg- > Control: AttnInd Off, PwrInd On, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- > Interlock- > Changed: MRL- PresDet- LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [100] Virtual Channel <?> > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > > 00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) > (prog-if 00 [Normal decode]) > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Subsystem: nVidia Corporation Device 0000 > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+ > Address: 00000000fee0f00c Data: 4169 > Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- > Mapping Address Base: 00000000fee00000 > Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, > Latency L0 <512ns, L1 <4us > ClockPM- Surprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- > CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- > Surpise- > Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- > HPIrq- LinkChg- > Control: AttnInd Off, PwrInd On, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- > Interlock- > Changed: MRL- PresDet- LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [100] Virtual Channel <?> > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > > 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) > (prog-if 00 [Normal decode]) > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Subsystem: nVidia Corporation Device 0000 > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+ > Address: 00000000fee0f00c Data: 4171 > Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- > Mapping Address Base: 00000000fee00000 > Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, > Latency L0 <512ns, L1 <4us > ClockPM- Surprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- > CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- > Surpise- > Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- > HPIrq- LinkChg- > Control: AttnInd Off, PwrInd On, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- > Interlock- > Changed: MRL- PresDet- LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [100] Virtual Channel <?> > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > > 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, > Athlon64, Sempron] HyperTransport Configuration > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Capabilities: [80] HyperTransport: Host or Secondary Interface > Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ > Slave- <EOCErr- DUL- > Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- > <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- > Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit > DwFcInEn- LWO=16bit DwFcOutEn- > Revision ID: 3.00 > Link Frequency: 1.0GHz > Link Error: <Prot- <Ovfl- <EOC- CTLTm- > Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- > 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- > Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ > UIDRD- ExtRS- UCnfE- > > 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, > Athlon64, Sempron] Address Map > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > > 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, > Athlon64, Sempron] DRAM Controller > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Kernel modules: amd64_edac_mod > > 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, > Athlon64, Sempron] Miscellaneous Control > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Capabilities: [f0] Secure device <?> > > 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, > Athlon64, Sempron] Link Control > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > > 01:0a.0 VGA compatible controller: XGI Technology Inc. (eXtreme Graphics > Innovation) Volari Z7/Z9/Z9s (prog-if 00 [VGA controller]) > Subsystem: XGI Technology Inc. (eXtreme Graphics Innovation) Volari > Z7/Z9/Z9s > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > BIST result: 00 > Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] > Region 1: Memory at febc0000 (32-bit, non-prefetchable) [size=256K] > Region 2: I/O ports at ec00 [size=128] > Expansion ROM at <unassigned> [disabled] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > > > /dev/sda: > > ATA device, with non-removable media > Model Number: WDC WD5000AAKS-00A7B2 > Serial Number: WD-WCASZ0321108 > Firmware Revision: 01.03B01 > Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev > 2.5 > Standards: > Supported: 8 7 6 5 > Likely used: 8 > Configuration: > Logical max current > cylinders 16383 16383 > heads 16 16 > sectors/track 63 63 > -- > CHS current addressable sectors: 16514064 > LBA user addressable sectors: 268435455 > LBA48 user addressable sectors: 976773168 > Logical/Physical Sector size: 512 bytes > device size with M = 1024*1024: 476940 MBytes > device size with M = 1000*1000: 500107 MBytes (500 GB) > cache/buffer size = 16384 KBytes > Capabilities: > LBA, IORDY(can be disabled) > Queue depth: 32 > Standby timer values: spec'd by Standard, with device specific > minimum > R/W multiple sector transfer: Max = 16 Current = 16 > Recommended acoustic management value: 128, current value: 254 > DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 > Cycle time: min=120ns recommended=120ns > PIO: pio0 pio1 pio2 pio3 pio4 > Cycle time: no flow control=120ns IORDY flow control=120ns > Commands/features: > Enabled Supported: > * SMART feature set > Security Mode feature set > * Power Management feature set > * Write cache > * Look-ahead > * Host Protected Area feature set > * WRITE_BUFFER command > * READ_BUFFER command > * NOP cmd > * DOWNLOAD_MICROCODE > Power-Up In Standby feature set > * SET_FEATURES required to spinup after power up > SET_MAX security extension > Automatic Acoustic Management feature set > * 48-bit Address feature set > * Device Configuration Overlay feature set > * Mandatory FLUSH_CACHE > * FLUSH_CACHE_EXT > * SMART error logging > * SMART self-test > * General Purpose Logging feature set > * 64-bit World wide name > * Segmented DOWNLOAD_MICROCODE > * Gen1 signaling speed (1.5Gb/s) > * Gen2 signaling speed (3.0Gb/s) > * Native Command Queueing (NCQ) > * Host-initiated interface power management > * Phy event counters > DMA Setup Auto-Activate optimization > * Software settings preservation > * SMART Command Transport (SCT) feature set > * SCT Long Sector Access (AC1) > * SCT LBA Segment Access (AC2) > * SCT Error Recovery Control (AC3) > * SCT Features Control (AC4) > * SCT Data Tables (AC5) > unknown 206[12] (vendor specific) > unknown 206[13] (vendor specific) > Security: > Master password revision code = 65534 > supported > not enabled > not locked > frozen > not expired: security count > supported: enhanced erase > 84min for SECURITY ERASE UNIT. 84min for ENHANCED SECURITY ERASE > UNIT. > Logical Unit WWN Device Identifier: 50014ee101cedc24 > NAA : 5 > IEEE OUI : 0014ee > Unique ID : 101cedc24 > Checksum: correct > > /dev/md0: > Version : 0.90 > Creation Time : Mon Jul 27 22:38:26 2009 > Raid Level : raid1 > Array Size : 102336 (99.95 MiB 104.79 MB) > Used Dev Size : 102336 (99.95 MiB 104.79 MB) > Raid Devices : 4 > Total Devices : 4 > Preferred Minor : 0 > Persistence : Superblock is persistent > > Update Time : Mon Sep 21 11:02:14 2009 > State : clean > Active Devices : 4 > Working Devices : 4 > Failed Devices : 0 > Spare Devices : 0 > > UUID : 9037def2:035b0d10:bfe78010:bc810f04 > Events : 0.44 > > Number Major Minor RaidDevice State > 0 8 1 0 active sync /dev/sda1 > 1 8 17 1 active sync /dev/sdb1 > 2 8 33 2 active sync /dev/sdc1 > 3 8 49 3 active sync /dev/sdd1 > /dev/md1: > Version : 0.90 > Creation Time : Mon Jul 27 22:38:28 2009 > Raid Level : raid1 > Array Size : 4095936 (3.91 GiB 4.19 GB) > Used Dev Size : 4095936 (3.91 GiB 4.19 GB) > Raid Devices : 4 > Total Devices : 4 > Preferred Minor : 1 > Persistence : Superblock is persistent > > Update Time : Mon Sep 21 11:02:14 2009 > State : clean > Active Devices : 4 > Working Devices : 4 > Failed Devices : 0 > Spare Devices : 0 > > UUID : 642c2833:bf033a7d:bfe78010:bc810f04 > Events : 0.44 > > Number Major Minor RaidDevice State > 0 8 2 0 active sync /dev/sda2 > 1 8 18 1 active sync /dev/sdb2 > 2 8 34 2 active sync /dev/sdc2 > 3 8 50 3 active sync /dev/sdd2 > /dev/md2: > Version : 0.90 > Creation Time : Mon Jul 27 22:38:30 2009 > Raid Level : raid1 > Array Size : 484185536 (461.76 GiB 495.81 GB) > Used Dev Size : 484185536 (461.76 GiB 495.81 GB) > Raid Devices : 4 > Total Devices : 4 > Preferred Minor : 2 > Persistence : Superblock is persistent > > Update Time : Mon Sep 21 11:02:24 2009 > State : clean > Active Devices : 4 > Working Devices : 4 > Failed Devices : 0 > Spare Devices : 0 > > UUID : ce106d52:0c0373f7:bfe78010:bc810f04 > Events : 0.66 > > Number Major Minor RaidDevice State > 0 8 3 0 active sync /dev/sda3 > 1 8 19 1 active sync /dev/sdb3 > 2 8 35 2 active sync /dev/sdc3 > 3 8 51 3 active sync /dev/sdd3 > > -- Majed B. -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
