I must have missed that part. It may not work for your case, but worth trying. Perhaps Neil Brown, or someone involved could shed some light on this. If I remember correctly, those soft lockups were harmless anyway. On Tue, Sep 22, 2009 at 5:43 PM, Lee Howard <faxguy@xxxxxxxxxxxxxxxx> wrote: > Thanks Majed, > > I've looked at the patch and it modifies md/raid5.c. However, I'm using > RAID1. Am I ignorant for doubting that the patch to raid5.c has any affect > on RAID1? > > Thanks, > > Lee. > > > Majed B. wrote: >> >> Hello, >> >> Check out the thread with the subject: BUG: soft lockup in >> [md4_raid5:21137] >> >> I think the guys have already fixed this in 2.6.32. The patch is >> mentioned in one of the replies, if you wish to try it. >> >> On Mon, Sep 21, 2009 at 9:08 PM, Lee Howard <faxguy@xxxxxxxxxxxxxxxx> >> wrote: >> >>> >>> Linux software RAID maintainers and developers, >>> >>> Two months ago I wrote to the Linux kernel mailing list regarding a >>> condition expressed as "BUG: soft lockup - CPU#3 stuck for 61s!". I >>> initially battled this recurring problem in both Fedora 10 and Fedora 11. >>> Rafael J. Wysocki suggested that I update the kernel (to 2.6.31-rc4 or >>> later) and see if the problem resurfaced. I then used kernel >>> 2.6.31-0.94.rc4.fc12.x86_64 and found that the problem still continued, >>> but >>> noticeably only when the md data-check process was run. >>> >>> You can read the last post to the LKML thread (with links to the entire >>> thread) here: >>> >>> http://lkml.org/lkml/2009/8/6/387 >>> >>> The md data-check is being run in Fedora 11 by >>> /etc/cron.weekly/raid-check >>> which is a little shell script that looks like this: >>> >>> ------------------------------------------------------ >>> #!/bin/bash >>> >>> for dev in `grep "^md.*: active" /proc/mdstat | cut -f 1 -d ' '`; do >>> [ -f /sys/block/$dev/md/sync_action ] && \ >>> echo "check" > /sys/block/$dev/md/sync_action >>> done >>> ------------------------------------------------------ >>> >>> I have disabled this weekly data-check, and since doing so have not >>> encountered any soft lockup (or any other problem, for that matter). >>> >>> For reference, you can see in this thread here that I am not the only one >>> to >>> have this problem: >>> >>> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/212684 >>> >>> It may important to note that I am running a 4-disk RAID1 array on 500GB >>> Western-Digial SATA drives. I've attached the output of 'lspci -vv' as >>> "lspci.out". I've attached the output of 'hdparm -I /dev/sda' as >>> "hdparm.out". /dev/sda, /dev/sdb, /dev/sdc, and /dev/sdd are all >>> identical >>> drive types. I've attached the output of 'for i in 0 1 2; do mdadm >>> --detail >>> /dev/md$i; done' as "mdadm.out". >>> >>> Please let me know if this is a configuration problem, a kernel bug, or >>> something else. Please let me know how to fix this problem so that I can >>> safely re-enable md data-check. >>> >>> Thanks, >>> >>> Lee. >>> >>> 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) >>> Subsystem: nVidia Corporation Device cb84 >>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>> Stepping- SERR+ FastB2B- DisINTx- >>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 >>> Capabilities: [44] HyperTransport: Slave or Primary Interface >>> Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL- >>> Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- >>> <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- >>> Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- >>> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- >>> Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ >>> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- >>> Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- >>> LWI=8bit >>> DwFcInEn- LWO=8bit DwFcOutEn- >>> Revision ID: 1.03 >>> Link Frequency 0: 1.0GHz >>> Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- >>> Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ >>> 500MHz+ >>> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- >>> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- >>> UIDRD- >>> Link Frequency 1: 200MHz >>> Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- >>> Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- >>> 500MHz- >>> 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- >>> Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- >>> SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- >>> Prefetchable memory behind bridge Upper: 00-00 >>> Bus Number: 00 >>> Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- >>> Mapping Address Base: 00000000fee00000 >>> >>> 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) >>> Subsystem: nVidia Corporation Device cb84 >>> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- >>> Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 >>> Region 0: I/O ports at 2f00 [size=128] >>> >>> 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) >>> Subsystem: nVidia Corporation Device cb84 >>> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- >>> Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> Interrupt: pin A routed to IRQ 10 >>> Region 0: I/O ports at dc00 [size=64] >>> Region 4: I/O ports at 2d00 [size=64] >>> Region 5: I/O ports at 2e00 [size=64] >>> Capabilities: [44] Power Management version 2 >>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >>> PME(D0-,D1-,D2-,D3hot+,D3cold+) >>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>> Kernel driver in use: nForce2_smbus >>> Kernel modules: i2c-nforce2 >>> >>> 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) >>> (prog-if 10 [OHCI]) >>> Subsystem: nVidia Corporation Device cb84 >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>> Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 (750ns min, 250ns max) >>> Interrupt: pin A routed to IRQ 22 >>> Region 0: Memory at feafb000 (32-bit, non-prefetchable) [size=4K] >>> Capabilities: [44] Power Management version 2 >>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA >>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>> Kernel driver in use: ohci_hcd >>> >>> 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) >>> (prog-if 20 [EHCI]) >>> Subsystem: nVidia Corporation Device cb84 >>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>> Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 (750ns min, 250ns max) >>> Interrupt: pin B routed to IRQ 23 >>> Region 0: Memory at feafac00 (32-bit, non-prefetchable) [size=256] >>> Capabilities: [44] Debug port: BAR=1 offset=0098 >>> Capabilities: [80] Power Management version 2 >>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA >>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>> Kernel driver in use: ehci_hcd >>> >>> 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) (prog-if 8a >>> [Master SecP PriP]) >>> Subsystem: nVidia Corporation Device cb84 >>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>> Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 (750ns min, 250ns max) >>> Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) >>> [size=8] >>> Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) >>> [size=1] >>> Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) >>> [size=8] >>> Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) >>> [size=1] >>> Region 4: I/O ports at ffa0 [size=16] >>> Capabilities: [44] Power Management version 2 >>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >>> PME(D0-,D1-,D2-,D3hot-,D3cold-) >>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>> Kernel driver in use: pata_amd >>> Kernel modules: ata_generic, pata_acpi, pata_amd >>> >>> 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) >>> (prog-if 85 [Master SecO PriO]) >>> Subsystem: nVidia Corporation Device cb84 >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>> Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 (750ns min, 250ns max) >>> Interrupt: pin A routed to IRQ 21 >>> Region 0: I/O ports at d480 [size=8] >>> Region 1: I/O ports at d400 [size=4] >>> Region 2: I/O ports at d080 [size=8] >>> Region 3: I/O ports at d000 [size=4] >>> Region 4: I/O ports at cc00 [size=16] >>> Region 5: Memory at feaf9000 (32-bit, non-prefetchable) [size=4K] >>> Capabilities: [44] Power Management version 2 >>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >>> PME(D0-,D1-,D2-,D3hot-,D3cold-) >>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>> Capabilities: [b0] MSI: Mask- 64bit+ Count=1/4 Enable- >>> Address: 0000000000000000 Data: 0000 >>> Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ >>> Kernel driver in use: sata_nv >>> Kernel modules: ata_generic, pata_acpi, sata_nv >>> >>> 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) >>> (prog-if 85 [Master SecO PriO]) >>> Subsystem: nVidia Corporation Device cb84 >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>> Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 (750ns min, 250ns max) >>> Interrupt: pin B routed to IRQ 20 >>> Region 0: I/O ports at c880 [size=8] >>> Region 1: I/O ports at c800 [size=4] >>> Region 2: I/O ports at c480 [size=8] >>> Region 3: I/O ports at c400 [size=4] >>> Region 4: I/O ports at c080 [size=16] >>> Region 5: Memory at feaf8000 (32-bit, non-prefetchable) [size=4K] >>> Capabilities: [44] Power Management version 2 >>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >>> PME(D0-,D1-,D2-,D3hot-,D3cold-) >>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>> Capabilities: [b0] MSI: Mask- 64bit+ Count=1/4 Enable- >>> Address: 0000000000000000 Data: 0000 >>> Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ >>> Kernel driver in use: sata_nv >>> Kernel modules: ata_generic, pata_acpi, sata_nv >>> >>> 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) >>> (prog-if 85 [Master SecO PriO]) >>> Subsystem: nVidia Corporation Device cb84 >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>> Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 (750ns min, 250ns max) >>> Interrupt: pin C routed to IRQ 23 >>> Region 0: I/O ports at c000 [size=8] >>> Region 1: I/O ports at bc00 [size=4] >>> Region 2: I/O ports at b880 [size=8] >>> Region 3: I/O ports at b800 [size=4] >>> Region 4: I/O ports at b480 [size=16] >>> Region 5: Memory at feaf7000 (32-bit, non-prefetchable) [size=4K] >>> Capabilities: [44] Power Management version 2 >>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >>> PME(D0-,D1-,D2-,D3hot-,D3cold-) >>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>> Capabilities: [b0] MSI: Mask- 64bit+ Count=1/4 Enable- >>> Address: 0000000000000000 Data: 0000 >>> Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ >>> Kernel driver in use: sata_nv >>> Kernel modules: ata_generic, pata_acpi, sata_nv >>> >>> 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) (prog-if >>> 01 >>> [Subtractive decode]) >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>> Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 >>> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 >>> I/O behind bridge: 0000e000-0000efff >>> Memory behind bridge: feb00000-febfffff >>> Prefetchable memory behind bridge: f8000000-fbffffff >>> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- >>> <TAbort- <MAbort- <SERR- <PERR- >>> BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- >>> PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- >>> Capabilities: [b8] Subsystem: nVidia Corporation Device cb84 >>> Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- >>> Mapping Address Base: 00000000fee00000 >>> >>> 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) >>> Subsystem: nVidia Corporation Device cb84 >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>> Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 (250ns min, 5000ns max) >>> Interrupt: pin A routed to IRQ 30 >>> Region 0: Memory at feaf6000 (32-bit, non-prefetchable) [size=4K] >>> Region 1: I/O ports at b400 [size=8] >>> Region 2: Memory at feafa800 (32-bit, non-prefetchable) [size=256] >>> Region 3: Memory at feafa400 (32-bit, non-prefetchable) [size=16] >>> Capabilities: [44] Power Management version 2 >>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA >>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>> Status: D0 PME-Enable+ DSel=0 DScale=0 PME- >>> Capabilities: [70] MSI-X: Enable- Mask- TabSize=8 >>> Vector table: BAR=2 offset=00000000 >>> PBA: BAR=3 offset=00000000 >>> Capabilities: [50] MSI: Mask+ 64bit+ Count=1/8 Enable+ >>> Address: 00000000fee0400c Data: 4199 >>> Masking: 000000fe Pending: 00000000 >>> Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ >>> Kernel driver in use: forcedeth >>> Kernel modules: forcedeth >>> >>> 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) >>> Subsystem: nVidia Corporation Device cb84 >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>> Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 (250ns min, 5000ns max) >>> Interrupt: pin A routed to IRQ 31 >>> Region 0: Memory at feaf5000 (32-bit, non-prefetchable) [size=4K] >>> Region 1: I/O ports at b080 [size=8] >>> Region 2: Memory at feafa000 (32-bit, non-prefetchable) [size=256] >>> Region 3: Memory at feaf4c00 (32-bit, non-prefetchable) [size=16] >>> Capabilities: [44] Power Management version 2 >>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA >>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>> Status: D0 PME-Enable+ DSel=0 DScale=0 PME- >>> Capabilities: [70] MSI-X: Enable- Mask- TabSize=8 >>> Vector table: BAR=2 offset=00000000 >>> PBA: BAR=3 offset=00000000 >>> Capabilities: [50] MSI: Mask+ 64bit+ Count=1/8 Enable+ >>> Address: 00000000fee0200c Data: 41a1 >>> Masking: 000000fe Pending: 00000000 >>> Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ >>> Kernel driver in use: forcedeth >>> Kernel modules: forcedeth >>> >>> 00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) >>> (prog-if 00 [Normal decode]) >>> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>> Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0, Cache Line Size: 64 bytes >>> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 >>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- <SERR- <PERR- >>> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- >>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >>> Capabilities: [40] Subsystem: nVidia Corporation Device 0000 >>> Capabilities: [48] Power Management version 2 >>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>> Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+ >>> Address: 00000000fee0f00c Data: 4149 >>> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- >>> Mapping Address Base: 00000000fee00000 >>> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 >>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s >>> <64ns, >>> L1 <1us >>> ExtTag- RBE+ FLReset- >>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- >>> Unsupported- >>> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ >>> MaxPayload 128 bytes, MaxReadReq 512 bytes >>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- >>> TransPend- >>> LnkCap: Port #5, Speed 2.5GT/s, Width x8, ASPM L0s L1, >>> Latency L0 <512ns, L1 <4us >>> ClockPM- Surprise- LLActRep+ BwNot- >>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- >>> CommClk- >>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >>> LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ >>> DLActive- BWMgmt- ABWMgmt- >>> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- >>> Surpise- >>> Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- >>> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- >>> HPIrq- LinkChg- >>> Control: AttnInd Off, PwrInd On, Power- Interlock- >>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- >>> Interlock- >>> Changed: MRL- PresDet- LinkState- >>> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- >>> CRSVisible- >>> RootCap: CRSVisible- >>> RootSta: PME ReqID 0000, PMEStatus- PMEPending- >>> Capabilities: [100] Virtual Channel <?> >>> Kernel driver in use: pcieport-driver >>> Kernel modules: shpchp >>> >>> 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) >>> (prog-if 00 [Normal decode]) >>> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>> Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0, Cache Line Size: 64 bytes >>> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 >>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- <SERR- <PERR- >>> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- >>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >>> Capabilities: [40] Subsystem: nVidia Corporation Device 0000 >>> Capabilities: [48] Power Management version 2 >>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>> Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+ >>> Address: 00000000fee0f00c Data: 4151 >>> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- >>> Mapping Address Base: 00000000fee00000 >>> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 >>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s >>> <64ns, >>> L1 <1us >>> ExtTag- RBE+ FLReset- >>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- >>> Unsupported- >>> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ >>> MaxPayload 128 bytes, MaxReadReq 512 bytes >>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- >>> TransPend- >>> LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, >>> Latency L0 <512ns, L1 <4us >>> ClockPM- Surprise- LLActRep+ BwNot- >>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- >>> CommClk- >>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >>> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ >>> DLActive- BWMgmt- ABWMgmt- >>> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- >>> Surpise- >>> Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- >>> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- >>> HPIrq- LinkChg- >>> Control: AttnInd Off, PwrInd On, Power- Interlock- >>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- >>> Interlock- >>> Changed: MRL- PresDet- LinkState- >>> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- >>> CRSVisible- >>> RootCap: CRSVisible- >>> RootSta: PME ReqID 0000, PMEStatus- PMEPending- >>> Capabilities: [100] Virtual Channel <?> >>> Kernel driver in use: pcieport-driver >>> Kernel modules: shpchp >>> >>> 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) >>> (prog-if 00 [Normal decode]) >>> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>> Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0, Cache Line Size: 64 bytes >>> Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 >>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- <SERR- <PERR- >>> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- >>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >>> Capabilities: [40] Subsystem: nVidia Corporation Device 0000 >>> Capabilities: [48] Power Management version 2 >>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>> Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+ >>> Address: 00000000fee0f00c Data: 4159 >>> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- >>> Mapping Address Base: 00000000fee00000 >>> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 >>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s >>> <64ns, >>> L1 <1us >>> ExtTag- RBE+ FLReset- >>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- >>> Unsupported- >>> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ >>> MaxPayload 128 bytes, MaxReadReq 512 bytes >>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- >>> TransPend- >>> LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, >>> Latency L0 <512ns, L1 <4us >>> ClockPM- Surprise- LLActRep+ BwNot- >>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- >>> CommClk- >>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >>> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ >>> DLActive- BWMgmt- ABWMgmt- >>> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- >>> Surpise- >>> Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- >>> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- >>> HPIrq- LinkChg- >>> Control: AttnInd Off, PwrInd On, Power- Interlock- >>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- >>> Interlock- >>> Changed: MRL- PresDet- LinkState- >>> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- >>> CRSVisible- >>> RootCap: CRSVisible- >>> RootSta: PME ReqID 0000, PMEStatus- PMEPending- >>> Capabilities: [100] Virtual Channel <?> >>> Kernel driver in use: pcieport-driver >>> Kernel modules: shpchp >>> >>> 00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) >>> (prog-if 00 [Normal decode]) >>> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>> Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0, Cache Line Size: 64 bytes >>> Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 >>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- <SERR- <PERR- >>> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- >>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >>> Capabilities: [40] Subsystem: nVidia Corporation Device 0000 >>> Capabilities: [48] Power Management version 2 >>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>> Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+ >>> Address: 00000000fee0f00c Data: 4161 >>> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- >>> Mapping Address Base: 00000000fee00000 >>> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 >>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s >>> <64ns, >>> L1 <1us >>> ExtTag- RBE+ FLReset- >>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- >>> Unsupported- >>> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ >>> MaxPayload 128 bytes, MaxReadReq 512 bytes >>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- >>> TransPend- >>> LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, >>> Latency L0 <512ns, L1 <4us >>> ClockPM- Surprise- LLActRep+ BwNot- >>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- >>> CommClk- >>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >>> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ >>> DLActive- BWMgmt- ABWMgmt- >>> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- >>> Surpise- >>> Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- >>> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- >>> HPIrq- LinkChg- >>> Control: AttnInd Off, PwrInd On, Power- Interlock- >>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- >>> Interlock- >>> Changed: MRL- PresDet- LinkState- >>> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- >>> CRSVisible- >>> RootCap: CRSVisible- >>> RootSta: PME ReqID 0000, PMEStatus- PMEPending- >>> Capabilities: [100] Virtual Channel <?> >>> Kernel driver in use: pcieport-driver >>> Kernel modules: shpchp >>> >>> 00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) >>> (prog-if 00 [Normal decode]) >>> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>> Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0, Cache Line Size: 64 bytes >>> Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 >>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- <SERR- <PERR- >>> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- >>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >>> Capabilities: [40] Subsystem: nVidia Corporation Device 0000 >>> Capabilities: [48] Power Management version 2 >>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>> Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+ >>> Address: 00000000fee0f00c Data: 4169 >>> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- >>> Mapping Address Base: 00000000fee00000 >>> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 >>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s >>> <64ns, >>> L1 <1us >>> ExtTag- RBE+ FLReset- >>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- >>> Unsupported- >>> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ >>> MaxPayload 128 bytes, MaxReadReq 512 bytes >>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- >>> TransPend- >>> LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, >>> Latency L0 <512ns, L1 <4us >>> ClockPM- Surprise- LLActRep+ BwNot- >>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- >>> CommClk- >>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >>> LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ >>> DLActive- BWMgmt- ABWMgmt- >>> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- >>> Surpise- >>> Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- >>> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- >>> HPIrq- LinkChg- >>> Control: AttnInd Off, PwrInd On, Power- Interlock- >>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- >>> Interlock- >>> Changed: MRL- PresDet- LinkState- >>> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- >>> CRSVisible- >>> RootCap: CRSVisible- >>> RootSta: PME ReqID 0000, PMEStatus- PMEPending- >>> Capabilities: [100] Virtual Channel <?> >>> Kernel driver in use: pcieport-driver >>> Kernel modules: shpchp >>> >>> 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) >>> (prog-if 00 [Normal decode]) >>> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>> Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0, Cache Line Size: 64 bytes >>> Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 >>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- <SERR- <PERR- >>> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- >>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >>> Capabilities: [40] Subsystem: nVidia Corporation Device 0000 >>> Capabilities: [48] Power Management version 2 >>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>> Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+ >>> Address: 00000000fee0f00c Data: 4171 >>> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- >>> Mapping Address Base: 00000000fee00000 >>> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 >>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s >>> <64ns, >>> L1 <1us >>> ExtTag- RBE+ FLReset- >>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- >>> Unsupported- >>> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ >>> MaxPayload 128 bytes, MaxReadReq 512 bytes >>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- >>> TransPend- >>> LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, >>> Latency L0 <512ns, L1 <4us >>> ClockPM- Surprise- LLActRep+ BwNot- >>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- >>> CommClk- >>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >>> LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ >>> DLActive- BWMgmt- ABWMgmt- >>> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- >>> Surpise- >>> Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- >>> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- >>> HPIrq- LinkChg- >>> Control: AttnInd Off, PwrInd On, Power- Interlock- >>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- >>> Interlock- >>> Changed: MRL- PresDet- LinkState- >>> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- >>> CRSVisible- >>> RootCap: CRSVisible- >>> RootSta: PME ReqID 0000, PMEStatus- PMEPending- >>> Capabilities: [100] Virtual Channel <?> >>> Kernel driver in use: pcieport-driver >>> Kernel modules: shpchp >>> >>> 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, >>> Athlon64, Sempron] HyperTransport Configuration >>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- >>> Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> Capabilities: [80] HyperTransport: Host or Secondary Interface >>> Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ >>> Slave- <EOCErr- DUL- >>> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- >>> <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- >>> Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- >>> LWI=16bit >>> DwFcInEn- LWO=16bit DwFcOutEn- >>> Revision ID: 3.00 >>> Link Frequency: 1.0GHz >>> Link Error: <Prot- <Ovfl- <EOC- CTLTm- >>> Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- >>> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- >>> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ >>> UIDRD- ExtRS- UCnfE- >>> >>> 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, >>> Athlon64, Sempron] Address Map >>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- >>> Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> >>> 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, >>> Athlon64, Sempron] DRAM Controller >>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- >>> Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> Kernel modules: amd64_edac_mod >>> >>> 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, >>> Athlon64, Sempron] Miscellaneous Control >>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- >>> Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> Capabilities: [f0] Secure device <?> >>> >>> 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, >>> Athlon64, Sempron] Link Control >>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- >>> Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> >>> 01:0a.0 VGA compatible controller: XGI Technology Inc. (eXtreme Graphics >>> Innovation) Volari Z7/Z9/Z9s (prog-if 00 [VGA controller]) >>> Subsystem: XGI Technology Inc. (eXtreme Graphics Innovation) Volari >>> Z7/Z9/Z9s >>> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- >>> Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- >>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>> BIST result: 00 >>> Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] >>> Region 1: Memory at febc0000 (32-bit, non-prefetchable) [size=256K] >>> Region 2: I/O ports at ec00 [size=128] >>> Expansion ROM at <unassigned> [disabled] >>> Capabilities: [40] Power Management version 2 >>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA >>> PME(D0-,D1-,D2-,D3hot-,D3cold-) >>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>> >>> >>> >>> /dev/sda: >>> >>> ATA device, with non-removable media >>> Model Number: WDC WD5000AAKS-00A7B2 >>> Serial Number: WD-WCASZ0321108 >>> Firmware Revision: 01.03B01 >>> Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev >>> 2.5 >>> Standards: >>> Supported: 8 7 6 5 >>> Likely used: 8 >>> Configuration: >>> Logical max current >>> cylinders 16383 16383 >>> heads 16 16 >>> sectors/track 63 63 >>> -- >>> CHS current addressable sectors: 16514064 >>> LBA user addressable sectors: 268435455 >>> LBA48 user addressable sectors: 976773168 >>> Logical/Physical Sector size: 512 bytes >>> device size with M = 1024*1024: 476940 MBytes >>> device size with M = 1000*1000: 500107 MBytes (500 GB) >>> cache/buffer size = 16384 KBytes >>> Capabilities: >>> LBA, IORDY(can be disabled) >>> Queue depth: 32 >>> Standby timer values: spec'd by Standard, with device specific >>> minimum >>> R/W multiple sector transfer: Max = 16 Current = 16 >>> Recommended acoustic management value: 128, current value: 254 >>> DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 >>> Cycle time: min=120ns recommended=120ns >>> PIO: pio0 pio1 pio2 pio3 pio4 >>> Cycle time: no flow control=120ns IORDY flow control=120ns >>> Commands/features: >>> Enabled Supported: >>> * SMART feature set >>> Security Mode feature set >>> * Power Management feature set >>> * Write cache >>> * Look-ahead >>> * Host Protected Area feature set >>> * WRITE_BUFFER command >>> * READ_BUFFER command >>> * NOP cmd >>> * DOWNLOAD_MICROCODE >>> Power-Up In Standby feature set >>> * SET_FEATURES required to spinup after power up >>> SET_MAX security extension >>> Automatic Acoustic Management feature set >>> * 48-bit Address feature set >>> * Device Configuration Overlay feature set >>> * Mandatory FLUSH_CACHE >>> * FLUSH_CACHE_EXT >>> * SMART error logging >>> * SMART self-test >>> * General Purpose Logging feature set >>> * 64-bit World wide name >>> * Segmented DOWNLOAD_MICROCODE >>> * Gen1 signaling speed (1.5Gb/s) >>> * Gen2 signaling speed (3.0Gb/s) >>> * Native Command Queueing (NCQ) >>> * Host-initiated interface power management >>> * Phy event counters >>> DMA Setup Auto-Activate optimization >>> * Software settings preservation >>> * SMART Command Transport (SCT) feature set >>> * SCT Long Sector Access (AC1) >>> * SCT LBA Segment Access (AC2) >>> * SCT Error Recovery Control (AC3) >>> * SCT Features Control (AC4) >>> * SCT Data Tables (AC5) >>> unknown 206[12] (vendor specific) >>> unknown 206[13] (vendor specific) >>> Security: >>> Master password revision code = 65534 >>> supported >>> not enabled >>> not locked >>> frozen >>> not expired: security count >>> supported: enhanced erase >>> 84min for SECURITY ERASE UNIT. 84min for ENHANCED SECURITY ERASE >>> UNIT. >>> Logical Unit WWN Device Identifier: 50014ee101cedc24 >>> NAA : 5 >>> IEEE OUI : 0014ee >>> Unique ID : 101cedc24 >>> Checksum: correct >>> >>> /dev/md0: >>> Version : 0.90 >>> Creation Time : Mon Jul 27 22:38:26 2009 >>> Raid Level : raid1 >>> Array Size : 102336 (99.95 MiB 104.79 MB) >>> Used Dev Size : 102336 (99.95 MiB 104.79 MB) >>> Raid Devices : 4 >>> Total Devices : 4 >>> Preferred Minor : 0 >>> Persistence : Superblock is persistent >>> >>> Update Time : Mon Sep 21 11:02:14 2009 >>> State : clean >>> Active Devices : 4 >>> Working Devices : 4 >>> Failed Devices : 0 >>> Spare Devices : 0 >>> >>> UUID : 9037def2:035b0d10:bfe78010:bc810f04 >>> Events : 0.44 >>> >>> Number Major Minor RaidDevice State >>> 0 8 1 0 active sync /dev/sda1 >>> 1 8 17 1 active sync /dev/sdb1 >>> 2 8 33 2 active sync /dev/sdc1 >>> 3 8 49 3 active sync /dev/sdd1 >>> /dev/md1: >>> Version : 0.90 >>> Creation Time : Mon Jul 27 22:38:28 2009 >>> Raid Level : raid1 >>> Array Size : 4095936 (3.91 GiB 4.19 GB) >>> Used Dev Size : 4095936 (3.91 GiB 4.19 GB) >>> Raid Devices : 4 >>> Total Devices : 4 >>> Preferred Minor : 1 >>> Persistence : Superblock is persistent >>> >>> Update Time : Mon Sep 21 11:02:14 2009 >>> State : clean >>> Active Devices : 4 >>> Working Devices : 4 >>> Failed Devices : 0 >>> Spare Devices : 0 >>> >>> UUID : 642c2833:bf033a7d:bfe78010:bc810f04 >>> Events : 0.44 >>> >>> Number Major Minor RaidDevice State >>> 0 8 2 0 active sync /dev/sda2 >>> 1 8 18 1 active sync /dev/sdb2 >>> 2 8 34 2 active sync /dev/sdc2 >>> 3 8 50 3 active sync /dev/sdd2 >>> /dev/md2: >>> Version : 0.90 >>> Creation Time : Mon Jul 27 22:38:30 2009 >>> Raid Level : raid1 >>> Array Size : 484185536 (461.76 GiB 495.81 GB) >>> Used Dev Size : 484185536 (461.76 GiB 495.81 GB) >>> Raid Devices : 4 >>> Total Devices : 4 >>> Preferred Minor : 2 >>> Persistence : Superblock is persistent >>> >>> Update Time : Mon Sep 21 11:02:24 2009 >>> State : clean >>> Active Devices : 4 >>> Working Devices : 4 >>> Failed Devices : 0 >>> Spare Devices : 0 >>> >>> UUID : ce106d52:0c0373f7:bfe78010:bc810f04 >>> Events : 0.66 >>> >>> Number Major Minor RaidDevice State >>> 0 8 3 0 active sync /dev/sda3 >>> 1 8 19 1 active sync /dev/sdb3 >>> 2 8 35 2 active sync /dev/sdc3 >>> 3 8 51 3 active sync /dev/sdd3 >>> >>> >>> >> >> >> >> > > -- Majed B. -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
