On 11.06.20 11:12, Jerome O'Flaherty wrote:
I have been trying to get Pulseaudio setup on a headless RPI to provide output via a HomePod
So, I have added the module-raop-discover to the default.pa.
I can see my HomePod in the list of sinks.
I can set the home as the default sink
e.g.
set-default-sink raop_output.Home-Pod.local
But say playing a WAV file (as a test hangs??) e.g.
pacat -v < ./DING.wav
Opening a playback stream with sample specification 's16le 2ch 44100Hz' and channel map 'front-left,front-right'.
Connection established.
Stream successfully created.
Buffer metrics: maxlength=4194304, tlength=352800, prebuf=349276, minreq=3528
Using sample spec 's16le 2ch 44100Hz', channel map 'front-left,front-right'.
Connected to device raop_output.Home-Pod.local (index: 3, suspended: no).
Got EOF.
Failed to drain stream: Timeout3 usec.
Playback stream drained.
Draining connection to server.
On the same RPI I have forked-daapd working perfectly streaming audio to the HomePod (so I believe the connectivity is perfect) !!
What I specifically want to do is use librespot to publish the HomePod locally around my network on Spotify and separately
I can see that LibReSpot using using PulseAudio as its output and roughly hangs in the same place.
So, basically I am wondering if anyone has successful managed to get the RAOP support in Pulseaudio to work - I did look at the
source of forked-daapd and they seem to have their own RAOP codebase so possible they have forked the RAOP code for their own use.
Anyway, any help would be great.
Thanks
Which pulseaudio version are you using? Did you try current git or PA
13.99? There
have been quite a few changes in the RAOP code since 13.0. If that does
not work,
please open an issue at
https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues
Regards
Georg
_______________________________________________
pulseaudio-discuss mailing list
pulseaudio-discuss@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
