On 12.11.2017 09:13, S.C.T.N Gmbh wrote: Please don't top post. > pulseaudio 5.0 > > Linux TEST 4.9.35-v7+ #1014 SMP Fri Jun 30 14:47:43 BST 2017 armv7l > GNU/Linux (Raspbian Jessie, Raspberry Pi 3) > > The only thing I changed in the config files is: > exit-idle-time = -1 > > In daemon.conf > That is a very old version of pulse. Can you try current 11.1 or git? > *Von:*Georg Chini [mailto:georg at chini.tk] > *Gesendet:* Samstag, 11. November 2017 20:58 > *An:* General PulseAudio Discussion; S.C.T.N Gmbh > *Betreff:* Re: [pulseaudio-discuss] WG: AW: module-sine for generating > two independent sine wave signals on the left and right output of a > sound device > > On 11.11.2017 15:27, Georg Chini wrote: > > On 11.11.2017 14:58, S.C.T.N Gmbh wrote: > > please don't top post on that list. > > Yes I can confirm that: > > Pactl unload-module <index> > stops the sine output on both channels. > > But in > > pactl list modules short > > the module<index> has disappeared while the other module-sine > is still there. > > > This definitely should not happen. I'll investigate and see if I can > reproduce the issue. > > > I cannot reproduce it here. For me it works and I can also immediately > reload module-sine after unloading. What platform are you on and > which version of PA are you using? > > > > _______________________________________________ > pulseaudio-discuss mailing list > pulseaudio-discuss at lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20171112/6d65692d/attachment.html>
