pulseaudio 5.0 Linux TEST 4.9.35-v7+ #1014 SMP Fri Jun 30 14:47:43 BST 2017 armv7l GNU/Linux (Raspbian Jessie, Raspberry Pi 3) The only thing I changed in the config files is: exit-idle-time = -1 In daemon.conf Von: Georg Chini [mailto:georg at chini.tk] Gesendet: Samstag, 11. November 2017 20:58 An: General PulseAudio Discussion; S.C.T.N Gmbh Betreff: Re: [pulseaudio-discuss] WG: AW: module-sine for generating two independent sine wave signals on the left and right output of a sound device On 11.11.2017 15:27, Georg Chini wrote: On 11.11.2017 14:58, S.C.T.N Gmbh wrote: please don't top post on that list. Yes I can confirm that: Pactl unload-module <index> stops the sine output on both channels. But in pactl list modules short the module<index> has disappeared while the other module-sine is still there. This definitely should not happen. I'll investigate and see if I can reproduce the issue. I cannot reproduce it here. For me it works and I can also immediately reload module-sine after unloading. What platform are you on and which version of PA are you using? -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20171112/b96d46bd/attachment.html>
