-----Original Message----- From: pulseaudio-discuss-bounces@xxxxxxxxxxxxxxxx [mailto:pulseaudio-discuss-bounces@xxxxxxxxxxxxxxxx] On Behalf Of Colin Guthrie Sent: Tuesday, 20 April, 2010 19:42 To: pulseaudio-discuss at mail.0pointer.de Subject: Re: Does pulseaudio require alsa/oss 'Twas brillig, and John Frankish at 20/04/10 15:04 did gyre and gimble: > Hi, > > Dumb question maybe, but.. > > Does pulseaudio require alsa or oss to be configured to detect a soundcard or should it detect the soundcard without either alsa or oss configured? > > The reason I ask is that the pulseaudio udev module will not detect the soundcard on my dell latitude D430 with/without alsa configured, but module-detect will detect the soundcard as long as alsa is configured. You very much need a working ALSA setup. If you're using Linux, forget about OSS (it's a dead system long since purged from the kernel and as such doomed to die a (sadly long and lingering) death). If the udev-detect module doesn't work, then that is a problem. Make sure your kernel is new enough for the udev version you are using. Col. -- OK, now that's clear, I tried the following with: $ cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xefebc000 irq 28 kernel 2.6.33.2 pulseaudio-0.9.21 patched Subject: [PATCH] udev: handle sound cards with both modem and audio properly Subject: [PATCH] udev: rework modem detection a bit [copy 90-pulseaudio.rules /etc/udev/rules.d] Basically module-udev-detect does not find any sound devices. If I use module-detect, then the sound device is found, but gstreamer-properties does not show any pulseaudio source. I also tried after pairing Bluetooth a2dp headphones - module-bluetooth-discover finds the headphones, but gstreamer-properties does not show any pulseaudio source and thus I cannot use rhythmbox to play to the headphones. I can set the headphones as the default alsa device in .asoundrc, but this bypasses pulseaudio and is not the object of the exercise. Any ideas? Output from pulseaudio -vv below. John ---------------- Using module-udev-detect $ pulseaudio -vv W: core-error.c: Unable to convert error string to locale, filtering. I: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted W: core-error.c: Unable to convert error string to locale, filtering. I: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted D: core-rtclock.c: Timer slack is set to 50 us. W: core-error.c: Unable to convert error string to locale, filtering. I: core-util.c: Failed to acquire high-priority scheduling: No such file or directory I: main.c: This is PulseAudio 0.9.21 D: main.c: Compilation host: i686-pc-linux-gnu D: main.c: Compilation CFLAGS: -march=i486 -mtune=i686 -Os -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option D: main.c: Running on host: Linux i686 2.6.33.2-tinycore #96 SMP Fri Apr 2 20:49:18 EET 2010 D: main.c: Found 2 CPUs. I: main.c: Page size is 4096 bytes D: main.c: Compiled with Valgrind support: no D: main.c: Running in valgrind mode: no D: main.c: Running in VM: no D: main.c: Optimized build: yes D: main.c: All asserts enabled. I: main.c: Machine ID is eff13815c6239ba86a9afe914bcec073. I: main.c: Using runtime directory /home/tc/.pulse/eff13815c6239ba86a9afe914bcec073-runtime. I: main.c: Using state directory /home/tc/.pulse. I: main.c: Using modules directory /usr/local/lib/pulse-0.9.21/modules. I: main.c: Running in system mode: no I: main.c: Fresh high-resolution timers available! Bon appetit! I: cpu-x86.c: CPU flags: MMX SSE SSE2 SSE3 SSSE3 I: svolume_mmx.c: Initialising MMX optimized functions. I: remap_mmx.c: Initialising MMX optimized remappers. I: svolume_sse.c: Initialising SSE2 optimized functions. I: remap_sse.c: Initialising SSE2 optimized remappers. I: sconv_sse.c: Initialising SSE2 optimized conversions. D: memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65496 D: database-gdbm.c: Opened GDBM database '/home/tc/.pulse/eff13815c6239ba86a9afe914bcec073-device-volumes.i686-pc-linux-gnu.gdbm' I: module-device-restore.c: Sucessfully opened database file '/home/tc/.pulse/eff13815c6239ba86a9afe914bcec073-device-volumes'. I: module.c: Loaded "module-device-restore" (index: #0; argument: ""). D: database-gdbm.c: Opened GDBM database '/home/tc/.pulse/eff13815c6239ba86a9afe914bcec073-stream-volumes.i686-pc-linux-gnu.gdbm' I: module-stream-restore.c: Sucessfully opened database file '/home/tc/.pulse/eff13815c6239ba86a9afe914bcec073-stream-volumes'. I: module.c: Loaded "module-stream-restore" (index: #1; argument: ""). D: database-gdbm.c: Opened GDBM database '/home/tc/.pulse/eff13815c6239ba86a9afe914bcec073-card-database.i686-pc-linux-gnu.gdbm' I: module-card-restore.c: Sucessfully opened database file '/home/tc/.pulse/eff13815c6239ba86a9afe914bcec073-card-database'. I: module.c: Loaded "module-card-restore" (index: #2; argument: ""). I: module.c: Loaded "module-augment-properties" (index: #3; argument: ""). D: cli-command.c: Checking for existance of '/usr/local/lib/pulse-0.9.21/modules/module-udev-detect.so': success I: module-udev-detect.c: Found 0 cards. I: module.c: Loaded "module-udev-detect" (index: #4; argument: ""). D: cli-command.c: Checking for existance of '/usr/local/lib/pulse-0.9.21/modules/module-bluetooth-discover.so': success D: dbus-util.c: Successfully connected to D-Bus system bus 8d489028a960aedd4c8a73d74bcec0e4 as :1.6 D: bluetooth-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired D: bluetooth-util.c: Bluetooth daemon is apparently not available. I: module.c: Loaded "module-bluetooth-discover" (index: #5; argument: ""). D: cli-command.c: Checking for existance of '/usr/local/lib/pulse-0.9.21/modules/module-esound-protocol-unix.so': success I: module.c: Loaded "module-esound-protocol-unix" (index: #6; argument: ""). I: module.c: Loaded "module-native-protocol-unix" (index: #7; argument: ""). D: cli-command.c: Checking for existance of '/usr/local/lib/pulse-0.9.21/modules/module-gconf.so': success I: module.c: Loaded "module-gconf" (index: #8; argument: ""). I: module.c: Loaded "module-default-device-restore" (index: #9; argument: ""). I: module.c: Loaded "module-rescue-streams" (index: #10; argument: ""). D: module-always-sink.c: Autoloading null-sink as no other sinks detected. I: sink.c: Created sink 0 "auto_null" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right I: sink.c: device.description = "Dummy Output" I: sink.c: device.class = "abstract" I: sink.c: device.icon_name = "audio-card" D: core-subscribe.c: Dropped redundant event due to change event. I: source.c: Created source 0 "auto_null.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right I: source.c: device.description = "Monitor of Dummy Output" I: source.c: device.class = "monitor" I: source.c: device.icon_name = "audio-input-microphone" D: module-null-sink.c: Thread starting up I: module.c: Loaded "module-null-sink" (index: #11; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'"). I: module.c: Loaded "module-always-sink" (index: #12; argument: ""). I: module.c: Loaded "module-intended-roles" (index: #13; argument: ""). D: module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds. I: module.c: Loaded "module-suspend-on-idle" (index: #14; argument: ""). I: module.c: Loaded "module-console-kit" (index: #15; argument: ""). I: module.c: Loaded "module-position-event-sounds" (index: #16; argument: ""). I: module.c: Loaded "module-cork-music-on-phone" (index: #17; argument: ""). D: dbus-util.c: Successfully connected to D-Bus session bus 2c8e20306a15a16174493d2d4bcec0e7 as :1.4 D: main.c: Got org.pulseaudio.Server! I: main.c: Daemon startup complete. I: module-device-restore.c: Storing volume/mute/port for device sink:auto_null. I: module-device-restore.c: Storing volume/mute/port for device source:auto_null.monitor. I: module-suspend-on-idle.c: Sink auto_null idle for too long, suspending ... D: sink.c: Suspend cause of sink auto_null is 0x0004, suspending D: core-subscribe.c: Dropped redundant event due to change event. I: module-device-restore.c: Synced. [edit /usr/local/etc/pulse/default.pa] ### Automatically load driver modules depending on the hardware available #.ifexists module-udev-detect.so #load-module module-udev-detect #.else ### Alternatively use the static hardware detection module (for systems that ### lack udev support) load-module module-detect #.endif $ pulseaudio -vv ... I: module-card-restore.c: Sucessfully opened database file '/home/tc/.pulse/eff13815c6239ba86a9afe914bcec073-card-database'. I: module.c: Loaded "module-card-restore" (index: #2; argument: ""). I: module.c: Loaded "module-augment-properties" (index: #3; argument: ""). W: module.c: module-detect is deprecated: Please use module-udev-detect instead of module-detect! D: dbus-util.c: Successfully connected to D-Bus session bus 2c8e20306a15a16174493d2d4bcec0e7 as :1.5 D: reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0' D: reserve-wrap.c: Successfully create reservation lock monitor for device 'Audio0' D: alsa-util.c: Checking for superset analog-stereo (front:%f) D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ... D: alsa-util.c: Managed to open front:0 D: alsa-util.c: Maximum hw buffer size is 371 ms D: alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 88200 samples). I: alsa-sink.c: Successfully opened device front:0. I: alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo). I: alsa-sink.c: Successfully enabled mmap() mode. I: alsa-sink.c: Successfully enabled timer-based scheduling mode. I: (alsa-lib)control.c: Invalid CTL front:0 W: alsa-util.c: Unable to convert error string to locale, filtering. I: alsa-mixer.c: Unable to attach to mixer front:0: No such file or directory I: alsa-mixer.c: Successfully attached to mixer 'hw:0' D: alsa-mixer.c: Probing path 'analog-output' D: alsa-mixer.c: Probing path 'analog-output-speaker' D: alsa-mixer.c: Probe of element 'Speaker' failed. D: alsa-mixer.c: Probing path 'analog-output-headphones' D: alsa-mixer.c: Probe of element 'Headphone' failed. D: alsa-mixer.c: Probing path 'analog-output-headphones-2' D: alsa-mixer.c: Probe of element 'Headphone2' failed. D: alsa-mixer.c: Probing path 'analog-output-mono' D: alsa-mixer.c: Probe of element 'Master Mono' failed. D: alsa-mixer.c: Probing path 'analog-output-lfe-on-mono' D: alsa-mixer.c: Probe of element 'Master Mono' failed. D: alsa-sink.c: Probed mixer paths: D: alsa-mixer.c: Path Set 0x8155ea0, direction=1, probed=yes D: alsa-mixer.c: Path analog-output (Analog Output), direction=1, priority=99, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-46.5, max_dB=0 D: alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes I: sink.c: Created sink 0 "alsa_output.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right I: sink.c: alsa.resolution_bits = "16" I: sink.c: device.api = "alsa" I: sink.c: device.class = "sound" I: sink.c: alsa.class = "generic" I: sink.c: alsa.subclass = "generic-mix" I: sink.c: alsa.name = "STAC92xx Analog" I: sink.c: alsa.id = "STAC92xx Analog" I: sink.c: alsa.subdevice = "0" I: sink.c: alsa.subdevice_name = "subdevice #0" I: sink.c: alsa.device = "0" I: sink.c: alsa.card = "0" I: sink.c: alsa.card_name = "HDA Intel" I: sink.c: alsa.long_card_name = "HDA Intel at 0xefebc000 irq 28" I: sink.c: alsa.driver_name = "snd_hda_intel" I: sink.c: device.bus_path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" I: sink.c: sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" I: sink.c: device.string = "front:0" I: sink.c: device.buffering.buffer_size = "65536" I: sink.c: device.buffering.fragment_size = "32768" I: sink.c: device.access_mode = "mmap+timer" I: sink.c: device.profile.name = "analog-stereo" I: sink.c: device.profile.description = "Analog Stereo" I: sink.c: device.description = "HDA Intel Analog Stereo" I: sink.c: alsa.mixer_name = "SigmaTel STAC9200" I: sink.c: alsa.components = "HDA:83847690,10280201,00102201 HDA:14f12c06,14f1000f,00100000" I: sink.c: device.icon_name = "audio-card-analog" D: core-subscribe.c: Dropped redundant event due to change event. I: source.c: Created source 0 "alsa_output.0.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right I: source.c: device.description = "Monitor of HDA Intel Analog Stereo" I: source.c: device.class = "monitor" I: source.c: device.icon_name = "audio-input-microphone" I: alsa-sink.c: Using 2.0 fragments of size 32768 bytes (185.76ms), buffer size is 65536 bytes (371.52ms) I: alsa-sink.c: Time scheduling watermark is 20.00ms D: alsa-sink.c: hwbuf_unused=0 D: alsa-sink.c: setting avail_min=15502 D: alsa-mixer.c: Activating path analog-output D: alsa-mixer.c: Path analog-output (Analog Output), direction=1, priority=99, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-46.5, max_dB=0 D: alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes I: alsa-sink.c: Hardware volume ranges from -46.50 dB to 0.00 dB. I: alsa-sink.c: No particular base volume set, fixing to 0 dB I: alsa-sink.c: Using hardware volume control. Hardware dB scale supported. I: alsa-sink.c: Using hardware mute control. D: alsa-util.c: snd_pcm_dump(): D: alsa-util.c: Soft volume PCM D: alsa-util.c: Control: PCM Playback Volume D: alsa-util.c: min_dB: -51 D: alsa-util.c: max_dB: 0 D: alsa-util.c: resolution: 256 D: alsa-util.c: Its setup is: D: alsa-util.c: stream : PLAYBACK D: alsa-util.c: access : MMAP_INTERLEAVED D: alsa-util.c: format : S16_LE D: alsa-util.c: subformat : STD D: alsa-util.c: channels : 2 D: alsa-util.c: rate : 44100 D: alsa-util.c: exact rate : 44100 (44100/1) D: alsa-util.c: msbits : 16 D: alsa-util.c: buffer_size : 16384 D: alsa-util.c: period_size : 8192 D: alsa-util.c: period_time : 185759 D: alsa-util.c: tstamp_mode : ENABLE D: alsa-util.c: period_step : 1 D: alsa-util.c: avail_min : 15502 D: alsa-util.c: period_event : 0 D: alsa-util.c: start_threshold : -1 D: alsa-util.c: stop_threshold : 1073741824 D: alsa-util.c: silence_threshold: 0 D: alsa-util.c: silence_size : 0 D: alsa-util.c: boundary : 1073741824 D: alsa-util.c: Slave: Hardware PCM card 0 'HDA Intel' device 0 subdevice 0 D: alsa-util.c: Its setup is: D: alsa-util.c: stream : PLAYBACK D: alsa-util.c: access : MMAP_INTERLEAVED D: alsa-util.c: format : S16_LE D: alsa-util.c: subformat : STD D: alsa-util.c: channels : 2 D: alsa-util.c: rate : 44100 D: alsa-util.c: exact rate : 44100 (44100/1) D: alsa-util.c: msbits : 16 D: alsa-util.c: buffer_size : 16384 D: alsa-util.c: period_size : 8192 D: alsa-util.c: period_time : 185759 D: alsa-util.c: tstamp_mode : ENABLE D: alsa-util.c: period_step : 1 D: alsa-util.c: avail_min : 15502 D: alsa-util.c: period_event : 0 D: alsa-util.c: start_threshold : -1 D: alsa-util.c: stop_threshold : 1073741824 D: alsa-util.c: silence_threshold: 0 D: alsa-util.c: silence_size : 0 D: alsa-util.c: boundary : 1073741824 D: alsa-util.c: appl_ptr : 0 D: alsa-util.c: hw_ptr : 0 D: alsa-sink.c: Read hardware volume: 0: 63% 1: 63% D: alsa-sink.c: Thread starting up I: core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 4, which is lower than the requested 5. I: alsa-sink.c: Starting playback. D: alsa-sink.c: Cutting sleep time for the initial iterations by half. I: module.c: Loaded "module-alsa-sink" (index: #4; argument: "device_id=0"). D: alsa-util.c: Checking for superset analog-stereo (front:%f) D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ... D: alsa-util.c: Managed to open front:0 D: alsa-util.c: Maximum hw buffer size is 371 ms D: alsa-sink.c: Cutting sleep time for the initial iterations by half. D: alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 88200 samples). I: alsa-source.c: Successfully opened device front:0. I: alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo). I: alsa-source.c: Successfully enabled mmap() mode. I: alsa-source.c: Successfully enabled timer-based scheduling mode. I: (alsa-lib)control.c: Invalid CTL front:0 W: alsa-util.c: Unable to convert error string to locale, filtering. I: alsa-mixer.c: Unable to attach to mixer front:0: No such file or directory I: alsa-mixer.c: Successfully attached to mixer 'hw:0' D: alsa-mixer.c: Probing path 'analog-input' D: alsa-mixer.c: Probing path 'analog-input-microphone' D: alsa-mixer.c: Probe of element 'Mic' failed. D: alsa-mixer.c: Probing path 'analog-input-linein' D: alsa-mixer.c: Probe of element 'Line' failed. D: alsa-mixer.c: Probing path 'analog-input' D: alsa-mixer.c: Probe of element 'Aux' failed. D: alsa-mixer.c: Probing path 'analog-input-video' D: alsa-mixer.c: Probe of element 'Video' failed. D: alsa-mixer.c: Probing path 'analog-input-video' D: alsa-mixer.c: Probe of element 'TV Tuner' failed. D: alsa-mixer.c: Probing path 'analog-input-radio' D: alsa-mixer.c: Probe of element 'FM' failed. D: alsa-mixer.c: Probing path 'analog-input' D: alsa-mixer.c: Probe of element 'Mic/Line' failed. D: alsa-source.c: Probed mixer paths: D: alsa-mixer.c: Path Set 0x81741a0, direction=2, probed=yes D: alsa-mixer.c: Path analog-input (Analog Input), direction=2, priority=100, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=15, min_dB=0, max_dB=22.5 D: alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, enumeration=0, required=2, required_absent=0, mask=0x4037e00000000f66, n_channels=2, override_map=yes D: alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, enumeration=1, required=0, required_absent=0, mask=0x0, n_channels=0, override_map=no D: alsa-mixer.c: Option Mic (input-microphone/Microphone) index=0, priority=20 D: alsa-mixer.c: Option Line (input-linein/Line-In) index=1, priority=18 D: alsa-mixer.c: Setting input-microphone (Microphone) priority=20 D: alsa-mixer.c: Setting input-linein (Line-In) priority=18 D: alsa-mixer.c: Added 2 ports D: core-subscribe.c: Dropped redundant event due to change event. I: source.c: Created source 1 "alsa_input.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right I: source.c: alsa.resolution_bits = "16" I: source.c: device.api = "alsa" I: source.c: device.class = "sound" I: source.c: alsa.class = "generic" I: source.c: alsa.subclass = "generic-mix" I: source.c: alsa.name = "STAC92xx Analog" I: source.c: alsa.id = "STAC92xx Analog" I: source.c: alsa.subdevice = "0" I: source.c: alsa.subdevice_name = "subdevice #0" I: source.c: alsa.device = "0" I: source.c: alsa.card = "0" I: source.c: alsa.card_name = "HDA Intel" I: source.c: alsa.long_card_name = "HDA Intel at 0xefebc000 irq 28" I: source.c: alsa.driver_name = "snd_hda_intel" I: source.c: device.bus_path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" I: source.c: sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" I: source.c: device.string = "front:0" I: source.c: device.buffering.buffer_size = "65536" I: source.c: device.buffering.fragment_size = "32768" I: source.c: device.access_mode = "mmap+timer" I: source.c: device.profile.name = "analog-stereo" I: source.c: device.profile.description = "Analog Stereo" I: source.c: device.description = "HDA Intel Analog Stereo" I: source.c: alsa.mixer_name = "SigmaTel STAC9200" I: source.c: alsa.components = "HDA:83847690,10280201,00102201 HDA:14f12c06,14f1000f,00100000" I: source.c: device.icon_name = "audio-input-microphone-analog" I: alsa-source.c: Using 2.0 fragments of size 32768 bytes (185.76ms), buffer size is 65536 bytes (371.52ms) I: alsa-source.c: Time scheduling watermark is 20.00ms D: alsa-source.c: hwbuf_unused=0 D: alsa-source.c: setting avail_min=15502 D: alsa-mixer.c: Activating path analog-input D: alsa-mixer.c: Path analog-input (Analog Input), direction=2, priority=100, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=15, min_dB=0, max_dB=22.5 D: alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, enumeration=0, required=2, required_absent=0, mask=0x4037e00000000f66, n_channels=2, override_map=yes D: alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, enumeration=1, required=0, required_absent=0, mask=0x0, n_channels=0, override_map=no D: alsa-mixer.c: Option Mic (input-microphone/Microphone) index=0, priority=20 D: alsa-mixer.c: Option Line (input-linein/Line-In) index=1, priority=18 D: alsa-mixer.c: Setting input-microphone (Microphone) priority=20 D: alsa-mixer.c: Setting input-linein (Line-In) priority=18 I: alsa-source.c: Hardware volume ranges from 0.00 dB to 22.50 dB. I: alsa-source.c: Fixing base volume to -22.50 dB I: alsa-source.c: Using hardware volume control. Hardware dB scale supported. I: alsa-source.c: Using hardware mute control. D: alsa-util.c: snd_pcm_dump(): D: alsa-util.c: Soft volume PCM D: alsa-util.c: Control: PCM Playback Volume D: alsa-util.c: min_dB: -51 D: alsa-util.c: max_dB: 0 D: alsa-util.c: resolution: 256 D: alsa-util.c: Its setup is: D: alsa-util.c: stream : CAPTURE D: alsa-util.c: access : MMAP_INTERLEAVED D: alsa-util.c: format : S16_LE D: alsa-util.c: subformat : STD D: alsa-util.c: channels : 2 D: alsa-util.c: rate : 44100 D: alsa-util.c: exact rate : 44100 (44100/1) D: alsa-util.c: msbits : 16 D: alsa-util.c: buffer_size : 16384 D: alsa-util.c: period_size : 8192 D: alsa-util.c: period_time : 185759 D: alsa-util.c: tstamp_mode : ENABLE D: alsa-util.c: period_step : 1 D: alsa-util.c: avail_min : 15502 D: alsa-util.c: period_event : 0 D: alsa-util.c: start_threshold : -1 D: alsa-util.c: stop_threshold : 1073741824 D: alsa-util.c: silence_threshold: 0 D: alsa-util.c: silence_size : 0 D: alsa-util.c: boundary : 1073741824 D: alsa-util.c: Slave: Hardware PCM card 0 'HDA Intel' device 0 subdevice 0 D: alsa-util.c: Its setup is: D: alsa-util.c: stream : CAPTURE D: alsa-util.c: access : MMAP_INTERLEAVED D: alsa-util.c: format : S16_LE D: alsa-util.c: subformat : STD D: alsa-util.c: channels : 2 D: alsa-util.c: rate : 44100 D: alsa-util.c: exact rate : 44100 (44100/1) D: alsa-util.c: msbits : 16 D: alsa-util.c: buffer_size : 16384 D: alsa-util.c: period_size : 8192 D: alsa-util.c: period_time : 185759 D: alsa-util.c: tstamp_mode : ENABLE D: alsa-util.c: period_step : 1 D: alsa-util.c: avail_min : 15502 D: alsa-util.c: period_event : 0 D: alsa-util.c: start_threshold : -1 D: alsa-util.c: stop_threshold : 1073741824 D: alsa-util.c: silence_threshold: 0 D: alsa-util.c: silence_size : 0 D: alsa-util.c: boundary : 1073741824 D: alsa-util.c: appl_ptr : 0 D: alsa-util.c: hw_ptr : 0 D: alsa-source.c: Read hardware volume: 0: 42% 1: 42% D: alsa-source.c: Thread starting up I: core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 4, which is lower than the requested 5. I: module.c: Loaded "module-alsa-source" (index: #5; argument: "device_id=0"). I: module-detect.c: loaded 2 modules. I: module.c: Loaded "module-detect" (index: #6; argument: ""). D: cli-command.c: Checking for existance of '/usr/local/lib/pulse-0.9.21/modules/module-bluetooth-discover.so': success D: dbus-util.c: Successfully connected to D-Bus system bus 8d489028a960aedd4c8a73d74bcec0e4 as :1.9 D: bluetooth-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired D: bluetooth-util.c: Bluetooth daemon is apparently not available. I: module.c: Loaded "module-bluetooth-discover" (index: #7; argument: ""). D: cli-command.c: Checking for existance of '/usr/local/lib/pulse-0.9.21/modules/module-esound-protocol-unix.so': success I: module.c: Loaded "module-esound-protocol-unix" (index: #8; argument: ""). I: module.c: Loaded "module-native-protocol-unix" (index: #9; argument: ""). D: cli-command.c: Checking for existance of '/usr/local/lib/pulse-0.9.21/modules/module-gconf.so': success I: module.c: Loaded "module-gconf" (index: #10; argument: ""). I: module-default-device-restore.c: Saved default sink 'auto_null' not existant, not restoring default sink setting. I: module-default-device-restore.c: Saved default source 'auto_null.monitor' not existant, not restoring default source setting. I: module.c: Loaded "module-default-device-restore" (index: #11; argument: ""). I: module.c: Loaded "module-rescue-streams" (index: #12; argument: ""). I: module.c: Loaded "module-always-sink" (index: #13; argument: ""). I: module.c: Loaded "module-intended-roles" (index: #14; argument: ""). D: module-suspend-on-idle.c: Sink alsa_output.0.analog-stereo becomes idle, timeout in 5 seconds. D: module-suspend-on-idle.c: Source alsa_input.0.analog-stereo becomes idle, timeout in 5 seconds. I: module.c: Loaded "module-suspend-on-idle" (index: #15; argument: ""). I: module.c: Loaded "module-console-kit" (index: #16; argument: ""). I: module.c: Loaded "module-position-event-sounds" (index: #17; argument: ""). I: module.c: Loaded "module-cork-music-on-phone" (index: #18; argument: ""). D: main.c: Got org.pulseaudio.Server! I: main.c: Daemon startup complete. I: module.c: Unloading "module-detect" (index: #6). I: module.c: Unloaded "module-detect" (index: #6). D: core-subscribe.c: Dropped redundant event due to remove event. I: module-device-restore.c: Storing volume/mute/port for device sink:alsa_output.0.analog-stereo. I: module-device-restore.c: Storing volume/mute/port for device source:alsa_output.0.analog-stereo.monitor. I: module-device-restore.c: Storing volume/mute/port for device source:alsa_input.0.analog-stereo. I: module-suspend-on-idle.c: Source alsa_input.0.analog-stereo idle for too long, suspending ... D: source.c: Suspend cause of source alsa_input.0.analog-stereo is 0x0004, suspending I: alsa-source.c: Device suspended... I: module-suspend-on-idle.c: Sink alsa_output.0.analog-stereo idle for too long, suspending ... D: sink.c: Suspend cause of sink alsa_output.0.analog-stereo is 0x0004, suspending I: alsa-sink.c: Device suspended... D: reserve-wrap.c: Device lock status of reserve-monitor-wrapper at Audio0 changed: not busy D: core-subscribe.c: Dropped redundant event due to change event. I: module-device-restore.c: Synced. [gstreamer-properties does not show pulse source] [pair bluetooth a2dp headphones, try udev module] $ pulseaudio -vv D: cli-command.c: Checking for existance of '/usr/local/lib/pulse-0.9.21/modules/module-udev-detect.so': success I: module-udev-detect.c: Found 0 cards. I: module.c: Loaded "module-udev-detect" (index: #4; argument: ""). D: cli-command.c: Checking for existance of '/usr/local/lib/pulse-0.9.21/modules/module-bluetooth-discover.so': success D: dbus-util.c: Successfully connected to D-Bus system bus 3716504dd73c85223dfdd66c4bcec649 as :1.13 D: bluetooth-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired I: module.c: Loaded "module-bluetooth-discover" (index: #5; argument: ""). .. [gstreamer-properties does not show pulse source] [pair bluetooth a2dp headphones, try module-detect] [gstreamer-properties does not show pulse source] [use blueman - connect to audio sink] D: main.c: Got org.pulseaudio.Server! I: main.c: Daemon startup complete. I: module.c: Unloading "module-detect" (index: #6). I: module.c: Unloaded "module-detect" (index: #6). D: core-subscribe.c: Dropped redundant event due to remove event. D: core-subscribe.c: Dropped redundant event due to change event. I: module-suspend-on-idle.c: Source alsa_input.0.analog-stereo idle for too long, suspending ... D: source.c: Suspend cause of source alsa_input.0.analog-stereo is 0x0004, suspending I: alsa-source.c: Device suspended... I: module-suspend-on-idle.c: Sink alsa_output.0.analog-stereo idle for too long, suspending ... D: sink.c: Suspend cause of sink alsa_output.0.analog-stereo is 0x0004, suspending I: alsa-sink.c: Device suspended... D: reserve-wrap.c: Device lock status of reserve-monitor-wrapper at Audio0 changed: not busy D: bluetooth-util.c: dbus: interface=org.bluez.AudioSink, path=/org/bluez/5894/hci0/dev_00_1B_66_00_31_88, member=PropertyChanged D: module-console-kit.c: dbus: interface=org.bluez.AudioSink, path=/org/bluez/5894/hci0/dev_00_1B_66_00_31_88, member=PropertyChanged D: bluetooth-util.c: dbus: interface=org.bluez.Audio, path=/org/bluez/5894/hci0/dev_00_1B_66_00_31_88, member=PropertyChanged D: module-console-kit.c: dbus: interface=org.bluez.Audio, path=/org/bluez/5894/hci0/dev_00_1B_66_00_31_88, member=PropertyChanged D: bluetooth-util.c: dbus: interface=org.bluez.Device, path=/org/bluez/5894/hci0/dev_00_1B_66_00_31_88, member=PropertyChanged D: module-console-kit.c: dbus: interface=org.bluez.Device, path=/org/bluez/5894/hci0/dev_00_1B_66_00_31_88, member=PropertyChanged D: bluetooth-util.c: dbus: interface=org.bluez.AudioSink, path=/org/bluez/5894/hci0/dev_00_1B_66_00_31_88, member=PropertyChanged D: module-console-kit.c: dbus: interface=org.bluez.AudioSink, path=/org/bluez/5894/hci0/dev_00_1B_66_00_31_88, member=PropertyChanged D: bluetooth-util.c: dbus: interface=org.bluez.AudioSink, path=/org/bluez/5894/hci0/dev_00_1B_66_00_31_88, member=PropertyChanged D: module-console-kit.c: dbus: interface=org.bluez.AudioSink, path=/org/bluez/5894/hci0/dev_00_1B_66_00_31_88, member=PropertyChanged D: bluetooth-util.c: dbus: interface=org.bluez.Audio, path=/org/bluez/5894/hci0/dev_00_1B_66_00_31_88, member=PropertyChanged D: module-bluetooth-discover.c: Loading module-bluetooth-device address="00:1B:66:00:31:88" path="/org/bluez/5894/hci0/dev_00_1B_66_00_31_88" I: card.c: Created 0 "bluez_card.00_1B_66_00_31_88" D: module-bluetooth-device.c: Connected to the bluetooth audio service D: module-bluetooth-device.c: Sending BT_REQUEST -> BT_GET_CAPABILITIES D: module-bluetooth-device.c: Trying to receive message from audio service... D: module-bluetooth-device.c: Received BT_RESPONSE <- BT_GET_CAPABILITIES D: module-bluetooth-device.c: Payload size is 25 6 D: module-bluetooth-device.c: Sending BT_REQUEST -> BT_GET_CAPABILITIES D: module-bluetooth-device.c: Trying to receive message from audio service... D: module-bluetooth-device.c: Received BT_RESPONSE <- BT_GET_CAPABILITIES D: module-bluetooth-device.c: Payload size is 13 6 D: module-bluetooth-device.c: Got device capabilities D: module-bluetooth-device.c: Sending BT_REQUEST -> BT_OPEN D: module-bluetooth-device.c: Trying to receive message from audio service... D: module-bluetooth-device.c: Received BT_RESPONSE <- BT_OPEN D: module-bluetooth-device.c: Sending BT_REQUEST -> BT_SET_CONFIGURATION D: module-bluetooth-device.c: Trying to receive message from audio service... D: module-bluetooth-device.c: Received BT_RESPONSE <- BT_SET_CONFIGURATION I: module-bluetooth-device.c: SBC parameters: I: module-bluetooth-device.c: allocation=0 I: module-bluetooth-device.c: subbands=1 I: module-bluetooth-device.c: blocks=3 I: module-bluetooth-device.c: bitpool=53 D: module-bluetooth-device.c: Connection to the device configured D: module-bluetooth-device.c: Got the stream socket I: sink.c: Created sink 1 "bluez_sink.00_1B_66_00_31_88" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right I: sink.c: bluetooth.protocol = "a2dp" I: sink.c: device.description = "Sennheiser PXC310BT" I: sink.c: device.string = "00:1B:66:00:31:88" I: sink.c: device.api = "bluez" I: sink.c: device.class = "sound" I: sink.c: device.bus = "bluetooth" I: sink.c: device.form_factor = "headphone" I: sink.c: bluez.path = "/org/bluez/5894/hci0/dev_00_1B_66_00_31_88" I: sink.c: bluez.class = "0x240418" I: sink.c: bluez.name = "Sennheiser PXC310BT" I: sink.c: device.icon_name = "audio-headphones-bluetooth" I: source.c: Created source 2 "bluez_sink.00_1B_66_00_31_88.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right I: source.c: device.description = "Monitor of Sennheiser PXC310BT" I: source.c: device.class = "monitor" I: source.c: device.string = "00:1B:66:00:31:88" I: source.c: device.api = "bluez" I: source.c: device.bus = "bluetooth" I: source.c: device.form_factor = "headphone" I: source.c: bluez.path = "/org/bluez/5894/hci0/dev_00_1B_66_00_31_88" I: source.c: bluez.class = "0x240418" I: source.c: bluez.name = "Sennheiser PXC310BT" I: source.c: device.icon_name = "audio-headphones-bluetooth" D: module-bluetooth-device.c: IO Thread starting up I: core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 4, which is lower than the requested 5. D: module-bluetooth-device.c: Sending BT_REQUEST -> BT_START_STREAM D: module-bluetooth-device.c: Trying to receive message from audio service... D: module-bluetooth-device.c: Received BT_RESPONSE <- BT_START_STREAM D: module-bluetooth-device.c: Trying to receive message from audio service... D: module-bluetooth-device.c: Received BT_RESPONSE <- BT_NEW_STREAM D: module-bluetooth-device.c: Stream properly set up, we're ready to roll! D: module-bluetooth-device.c: Using SBC encoder implementation: MMX D: module-suspend-on-idle.c: Sink bluez_sink.00_1B_66_00_31_88 becomes idle, timeout in 5 seconds. I: module.c: Loaded "module-bluetooth-device" (index: #19; argument: "address="00:1B:66:00:31:88" path="/org/bluez/5894/hci0/dev_00_1B_66_00_31_88""). D: module-console-kit.c: dbus: interface=org.bluez.Audio, path=/org/bluez/5894/hci0/dev_00_1B_66_00_31_88, member=PropertyChanged I: module-device-restore.c: Storing volume/mute/port for device sink:bluez_sink.00_1B_66_00_31_88. I: module-device-restore.c: Storing volume/mute/port for device source:bluez_sink.00_1B_66_00_31_88.monitor. D: bluetooth-util.c: dbus: interface=org.bluez.AudioSink, path=/org/bluez/5894/hci0/dev_00_1B_66_00_31_88, member=PropertyChanged D: module-console-kit.c: dbus: interface=org.bluez.AudioSink, path=/org/bluez/5894/hci0/dev_00_1B_66_00_31_88, member=PropertyChanged D: module-bluetooth-device.c: dbus: interface=org.bluez.AudioSink, path=/org/bluez/5894/hci0/dev_00_1B_66_00_31_88, member=PropertyChanged D: bluetooth-util.c: dbus: interface=org.bluez.AudioSink, path=/org/bluez/5894/hci0/dev_00_1B_66_00_31_88, member=PropertyChanged D: module-console-kit.c: dbus: interface=org.bluez.AudioSink, path=/org/bluez/5894/hci0/dev_00_1B_66_00_31_88, member=PropertyChanged D: module-bluetooth-device.c: dbus: interface=org.bluez.AudioSink, path=/org/bluez/5894/hci0/dev_00_1B_66_00_31_88, member=PropertyChanged I: module-suspend-on-idle.c: Sink bluez_sink.00_1B_66_00_31_88 idle for too long, suspending ... D: sink.c: Suspend cause of sink bluez_sink.00_1B_66_00_31_88 is 0x0004, suspending D: module-bluetooth-device.c: Sending BT_REQUEST -> BT_STOP_STREAM D: module-bluetooth-device.c: Trying to receive message from audio service... D: module-bluetooth-device.c: Received BT_RESPONSE <- BT_STOP_STREAM D: bluetooth-util.c: dbus: interface=org.bluez.AudioSink, path=/org/bluez/5894/hci0/dev_00_1B_66_00_31_88, member=PropertyChanged D: module-console-kit.c: dbus: interface=org.bluez.AudioSink, path=/org/bluez/5894/hci0/dev_00_1B_66_00_31_88, member=PropertyChanged D: module-bluetooth-device.c: dbus: interface=org.bluez.AudioSink, path=/org/bluez/5894/hci0/dev_00_1B_66_00_31_88, member=PropertyChanged D: bluetooth-util.c: dbus: interface=org.bluez.AudioSink, path=/org/bluez/5894/hci0/dev_00_1B_66_00_31_88, member=PropertyChanged D: module-console-kit.c: dbus: interface=org.bluez.AudioSink, path=/org/bluez/5894/hci0/dev_00_1B_66_00_31_88, member=PropertyChanged D: module-bluetooth-device.c: dbus: interface=org.bluez.AudioSink, path=/org/bluez/5894/hci0/dev_00_1B_66_00_31_88, member=PropertyChanged I: module-device-restore.c: Synced. [gstreamer-properties does not show pulse source]
