This makes the machine look up the LED from a GPIO machine
descriptor table. The Geode LEDs should be on the CS5535
companion chip.
Cc: linux-gpio@xxxxxxxxxxxxxxx
Cc: Andres Salomon <dilinger@xxxxxxxxxx>
Cc: linux-geode@xxxxxxxxxxxxxxxxxxx
Cc: Andy Shevchenko <andy@xxxxxxxxxxxxx>
Cc: Darren Hart <dvhart@xxxxxxxxxxxxx>
Cc: platform-driver-x86@xxxxxxxxxxxxxxx
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
arch/x86/platform/geode/net5501.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/arch/x86/platform/geode/net5501.c b/arch/x86/platform/geode/net5501.c
index 163e1b545517..d4e6c57b9c87 100644
--- a/arch/x86/platform/geode/net5501.c
+++ b/arch/x86/platform/geode/net5501.c
@@ -20,6 +20,7 @@
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
+#include <linux/gpio/machine.h>
#include <asm/geode.h>
@@ -55,9 +56,7 @@ static struct platform_device net5501_buttons_dev = {
static struct gpio_led net5501_leds[] = {
{
.name = "net5501:1",
- .gpio = 6,
.default_trigger = "default-on",
- .active_low = 0,
},
};
@@ -66,6 +65,15 @@ static struct gpio_led_platform_data net5501_leds_data = {
.leds = net5501_leds,
};
+static struct gpiod_lookup_table net5501_leds_gpio_table = {
+ .dev_id = "leds-gpio",
+ .table = {
+ /* The Geode GPIOs should be on the CS5535 companion chip */
+ GPIO_LOOKUP_IDX("cs5535-gpio", 6, NULL, 0, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static struct platform_device net5501_leds_dev = {
.name = "leds-gpio",
.id = -1,
@@ -80,6 +88,7 @@ static struct platform_device *net5501_devs[] __initdata = {
static void __init register_net5501(void)
{
/* Setup LED control through leds-gpio driver */
+ gpiod_add_lookup_table(&net5501_leds_gpio_table);
platform_add_devices(net5501_devs, ARRAY_SIZE(net5501_devs));
}
--
2.26.2
