[PATCH] x86/platform/geos: Convert LED to GPIO machine descriptor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This makes the machine look up the LED from a GPIO machine
descriptor table. The Geode LEDs should be on the CS5535
companion chip.

Cc: linux-gpio@xxxxxxxxxxxxxxx
Cc: linux-geode@xxxxxxxxxxxxxxxxxxx
Cc: Andy Shevchenko <andy@xxxxxxxxxxxxx>
Cc: Darren Hart <dvhart@xxxxxxxxxxxxx>
Cc: platform-driver-x86@xxxxxxxxxxxxxxx
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
 arch/x86/platform/geode/geos.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/arch/x86/platform/geode/geos.c b/arch/x86/platform/geode/geos.c
index 73a3f49b4eb6..fe66c0405af1 100644
--- a/arch/x86/platform/geode/geos.c
+++ b/arch/x86/platform/geode/geos.c
@@ -20,6 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
+#include <linux/gpio/machine.h>
 #include <linux/dmi.h>
 
 #include <asm/geode.h>
@@ -53,21 +54,15 @@ static struct platform_device geos_buttons_dev = {
 static struct gpio_led geos_leds[] = {
 	{
 		.name = "geos:1",
-		.gpio = 6,
 		.default_trigger = "default-on",
-		.active_low = 1,
 	},
 	{
 		.name = "geos:2",
-		.gpio = 25,
 		.default_trigger = "default-off",
-		.active_low = 1,
 	},
 	{
 		.name = "geos:3",
-		.gpio = 27,
 		.default_trigger = "default-off",
-		.active_low = 1,
 	},
 };
 
@@ -76,6 +71,17 @@ static struct gpio_led_platform_data geos_leds_data = {
 	.leds = geos_leds,
 };
 
+static struct gpiod_lookup_table geos_leds_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		/* The Geode GPIOs should be on the CS5535 companion chip */
+		GPIO_LOOKUP_IDX("cs5535-gpio", 6, NULL, 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("cs5535-gpio", 25, NULL, 1, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("cs5535-gpio", 27, NULL, 2, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct platform_device geos_leds_dev = {
 	.name = "leds-gpio",
 	.id = -1,
@@ -90,6 +96,7 @@ static struct platform_device *geos_devs[] __initdata = {
 static void __init register_geos(void)
 {
 	/* Setup LED control through leds-gpio driver */
+	gpiod_add_lookup_table(&geos_leds_gpio_table);
 	platform_add_devices(geos_devs, ARRAY_SIZE(geos_devs));
 }
 
-- 
2.26.2




[Index of Archives]     [Linux Kernel Development]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux