Followup: the pjsip --help doc says --auto-play only works for incoming calls, but browsing the code it looks like it should work for all calls. Try including --auto-play option, if that doesn't work then you'll have to step through the code and see what changes are needed to make auto-play work for outgoing calls. Bill On 9/25/2014 6:32 AM, Giannis Zompolas wrote: > > Hi everyone! > > I test a scenario where I register with: > > ./pjsua --id sip:myNumber at myims.com --registrar sip:myims.com --proxy > sip:anIP --realm myims.com --username user --password pass > > So as long as I am registered, I want to create a call to someone (it > is an auto-answer number) and play a .wav file using the command: > > ./pjsua --id sip:myNumber at myims.com sip:NumberToCall at myims.com > --proxy sip:anIP --play-file=applause.wav > > After I take the tcpdump, I see only the RTP flow of the auto-answer, > and the 1 sec of silence created by my own device (after that VAD > voice detector takes over). > > No RTPs with applause going out of my device! > > I see these logs if any helpful: > > pa_dev.c ..PortAudio sound library initialized, status=0 > > 12:18:35.779 pa_dev.c ..PortAudio host api count=2 > > 12:18:35.779 pa_dev.c ..Sound device count=4 -?I have a dummy > sound card, it should be enough! > > wav_player.c .File player 'applause.wav' created: samp.rate=44100, > ch=1, bufsize=4KB, filesize=534KB > > 12:18:35.794 pjsua_aud.c .Player created, id=0, slot=1 > > .Set sound device: capture=-1, playback=-2 > > 12:18:35.796 pjsua_app.c ..Turning sound device ON > > 12:18:35.797 pjsua_aud.c ..Opening sound device PCM at 16000/1/20ms > > 12:18:35.799 ec0xa183290 ...AEC created, clock_rate=16000, > channel=1, samples per frame=320, tail length=200 ms, latency=0 ms > > 12:18:35.800 pjsua_media.c .Call 0: initializing media.. > > 12:18:35.800 pjsua_media.c ..RTP socket reachable at 192.168.1.79:4000 > > 12:18:35.800 pjsua_media.c ..RTCP socket reachable at 192.168.1.79:4001 > > 12:18:35.800 pjsua_media.c ..Media index 0 selected for audio call 0 > > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/attachments/20140925/bce439e9/attachment.html>
