Thanks everyone for their suggestions. Following steps can be taken to increase number of calls supported on PJSIP: Example: If you have to increase simultaneous calls to 1000 change the following: 1. Change PJSUA_MAX_CALLS to 1000 and PJSUA_MAX_ACC to 1000 2. Change PJ_IOQUEUE_MAX_HANDLES to 2000 (double of desired number of calls). 3. Change __FD_SETSIZE to double to 2000 (double of desired number of calls). 4. Change PJSUA_MAX_PLAYERS to 1000. 5. Recompile pjsip using following steps: a. ./configure --disable-ssl --disable-sound; b. make dep c. make d. make install 6. Recompile your application with new libs. Thanks, Jitendra Singh From: pjsip [mailto:pjsip-bounces@xxxxxxxxxxxxxxx] On Behalf Of Omar Hussein Sent: 16 January 2013 07:53 PM To: pjsip list Subject: Re: Maximum calls supported on PJSIP Try PJ_IOQUEUE_MAX_HANDLES Regards Omar On 17/01/2013, at 12:33 AM, "Jitendra Singh" <jitendra.bhadoriya at one97.net> wrote: Hi Sandeep, I have already done that but didn?t mention in the mail. I set both of these to 600 (for testing 600 calls). But I think some internal parameter in pjsua also need to be changed to increase the maximum calls and currently these parameters are configured to 512. I want to know the variables which need to be changed. Thanks, Jitendra Singh Bhadoriya Technical Leader - One97 Communications Ltd +91.9717123309 From: pjsip [mailto:pjsip-bounces@xxxxxxxxxxxxxxx] On Behalf Of Sandeep Karanth Sent: 16 January 2013 06:58 PM To: pjsip list Subject: Re: Maximum calls supported on PJSIP Try # define PJSUA_MAX_CALLS 1024 # define PJSUA_MAX_PLAYERS 1024 On Wed, Jan 16, 2013 at 6:47 PM, Jitendra Singh <jitendra.bhadoriya at one97.net> wrote: Friends !! thanks for your inputs. We can set the maximum number of simultaneously calls to be supported, by setting following #defines : # define PJSUA_MAX_CALLS (500) # define PJSUA_MAX_PLAYERS 500 Then compile pjproject and then link your sipclient binary with these libraries. My problem is, I want to increase number of calls so that my sipclient can support say 1000 simultaneous calls. But when I try to configure say 600 calls (just to test whether more than 500 call supported or not), then at the startup I get following log in pjsip log file: 18:05:44.674 pjsua_media.c Unable to create media transport: Too many objects of the specified type (PJ_ETOOMANY) [status=70010] In this case Pjsip was able to open only 512 RTP and 512 RTCP sockets and prints the following logs: 18:05:44.674 pjsua_media.c RTP socket reachable at 10.0.6.141:41024 18:05:44.674 pjsua_media.c RTCP socket reachable at 10.0.6.141:41025 Now My Question is, which variable needs to be tuned/changed inside the PJSIP code, so that I can support more than 512 calls. Thanks, Jitendra Singh Bhadoriya Technical Leader - One97 Communications Ltd +91.9717123309 <tel:%2B91.9717123309> From: pjsip [mailto:pjsip-bounces@xxxxxxxxxxxxxxx] On Behalf Of Sandeep Karanth Sent: 16 January 2013 04:54 PM To: pjsip list Subject: Re: Maximum calls supported on PJSIP No. I was talking about the internal conference bridge created in pjsua_lib which handles the media processing for pjsua. The below link has better explaination http://trac.pjsip.org/repos/wiki/FAQ#pjsua-lib-perf I didnt use any tool to get 200-300 calls from pjsua. And btw I was doing playback of a wave file and not recording as i mentioned in a previous mail. U just need to go to config_site.h and u can copy the config from config_site_sample.h under PJ_CONFIG_MAXIMUM_SPEED and then recompile and try again. On Wed, Jan 16, 2013 at 4:45 PM, Khoa Pham <onmyway133 at gmail.com> wrote: When reading PJSIP Dev Guide, section 1.2.3 Polling the stack PJSIP stack never creates threads. All execution throughout the stack runs on behalf of application?s created thread, either when an API is called or when application calls the polling function Is this what you're talking about? And if yes, please show me the tool you used to make 200-300 calls, thanks -- Khoa Pham HCMC University of Science Faculty of Information Technology _______________________________________________ Visit our blog: http://blog.pjsip.org pjsip mailing list pjsip at lists.pjsip.org http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org _______________________________________________ Visit our blog: http://blog.pjsip.org pjsip mailing list pjsip at lists.pjsip.org http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org _______________________________________________ Visit our blog: http://blog.pjsip.org pjsip mailing list pjsip at lists.pjsip.org http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/attachments/20130201/a4ea7970/attachment-0001.html>
