I used pjproject 1.14.2 release version, not that branch. Did you try pjlib-test and pjmedia-test before run pjsua? regardsm Gang On Thu, Jul 26, 2012 at 9:16 PM, Monty Python <pythonexperiment at gmail.com> wrote: > Gang, > I finally rooted my device, I tried again to execute pjsua, > but a new kind of error appeared (SEGV_ACCERR). > > I/DEBUG ( 102): *** *** *** *** *** *** *** *** *** *** *** *** *** > *** *** *** > I/DEBUG ( 102): Build fingerprint: > 'Quanta/OP110_it/OP110:3.1/HMJ37/eng.20110712.152508:user/release-keys' > I/DEBUG ( 102): pid: 2092, tid: 2092 >>> ./pjsugo <<< > I/DEBUG ( 102): signal 11 (SIGSEGV), code 2 (SEGV_ACCERR), fault > addr beee8fd0 > I/DEBUG ( 102): r0 00000000 r1 beee8c60 r2 beee8c60 r3 ffffffff > I/DEBUG ( 102): r4 beee8e0b r5 beee8e24 r6 beee8e3e r7 beee8f4a > I/DEBUG ( 102): r8 beee8f5d r9 beee8f85 10 beee8fa0 fp beee8fbd > I/DEBUG ( 102): ip aff247a5 sp beee8cd0 lr aff2479d pc beee8fd0 > cpsr 40000010 > I/DEBUG ( 102): d0 00000000bd6bc8e3 d1 0000000000000000 > I/DEBUG ( 102): d2 0000000000000000 d3 0000000000000000 > I/DEBUG ( 102): d4 0000000000000000 d5 41855ed310000000 > I/DEBUG ( 102): d6 3f50624dd2f1a9fc d7 c18af96767a7b7d0 > I/DEBUG ( 102): d8 0000000000000000 d9 0000000000000000 > I/DEBUG ( 102): d10 0000000000000000 d11 0000000000000000 > I/DEBUG ( 102): d12 0000000000000000 d13 0000000000000000 > I/DEBUG ( 102): d14 0000000000000000 d15 0000000000000000 > I/DEBUG ( 102): scr 00000010 > I/DEBUG ( 102): > I/DEBUG ( 102): #00 pc beee8fd0 > I/DEBUG ( 102): #01 pc 00024798 /system/lib/libc.so (__set_errno) > I/DEBUG ( 102): > I/DEBUG ( 102): libc base address: aff00000 > I/DEBUG ( 102): > I/DEBUG ( 102): code around pc: > I/DEBUG ( 102): beee8fb0 6e6d2f3d 64732f74 64726163 444e4100 > I/DEBUG ( 102): beee8fc0 44494f52 5441445f 642f3d41 00617461 > I/DEBUG ( 102): beee8fd0 52444e41 5f44494f 504f5250 59545245 > I/DEBUG ( 102): beee8fe0 524f575f 4150534b 383d4543 3732332c > I/DEBUG ( 102): beee8ff0 2e003836 736a702f 006f6775 00000000 > I/DEBUG ( 102): > I/DEBUG ( 102): code around lr: > I/DEBUG ( 102): aff2477c f240b507 9300736c 33fff04f 466b9301 > I/DEBUG ( 102): aff2478c fd80f7ff bf00bd0e 4604b510 fac8f7ed > I/DEBUG ( 102): aff2479c f04f6004 bd1030ff 0ffff110 db02b510 > I/DEBUG ( 102): aff247ac f7ff4240 bd10fff1 48214603 4478b5f0 > I/DEBUG ( 102): aff247bc b0976800 68022150 4620ac01 92154e1d > I/DEBUG ( 102): > I/DEBUG ( 102): stack: > I/DEBUG ( 102): beee8c90 00000001 > I/DEBUG ( 102): beee8c94 beee8d78 > I/DEBUG ( 102): beee8c98 00000000 > I/DEBUG ( 102): beee8c9c beee8d81 > I/DEBUG ( 102): beee8ca0 beee8d96 > I/DEBUG ( 102): beee8ca4 beee8da6 > I/DEBUG ( 102): beee8ca8 beee8dce > I/DEBUG ( 102): beee8cac beee8e0b > I/DEBUG ( 102): beee8cb0 beee8e24 > I/DEBUG ( 102): beee8cb4 beee8e3e > I/DEBUG ( 102): beee8cb8 beee8f4a > I/DEBUG ( 102): beee8cbc beee8f5d > I/DEBUG ( 102): beee8cc0 beee8f85 > I/DEBUG ( 102): beee8cc4 beee8fa0 > I/DEBUG ( 102): beee8cc8 df002777 > I/DEBUG ( 102): beee8ccc e3a070ad > I/DEBUG ( 102): #01 beee8cd0 00000000 > I/DEBUG ( 102): beee8cd4 00000010 > I/DEBUG ( 102): beee8cd8 0000e0d7 /data/local/pjsugo > I/DEBUG ( 102): beee8cdc 00000006 > I/DEBUG ( 102): beee8ce0 00001000 > I/DEBUG ( 102): beee8ce4 00000011 > I/DEBUG ( 102): beee8ce8 00000064 > I/DEBUG ( 102): beee8cec 00000003 > I/DEBUG ( 102): beee8cf0 00008034 /data/local/pjsugo > I/DEBUG ( 102): beee8cf4 00000004 > I/DEBUG ( 102): beee8cf8 00000020 > I/DEBUG ( 102): beee8cfc 00000005 > I/DEBUG ( 102): beee8d00 00000008 > I/DEBUG ( 102): beee8d04 00000007 > I/DEBUG ( 102): beee8d08 00000000 > I/DEBUG ( 102): beee8d0c 00000008 > I/DEBUG ( 102): beee8d10 00000000 > I/DEBUG ( 102): beee8d14 00000009 > > I must say that I've tried to use the latest version of pjsua for the > given branch, but at compile time it gives me the following error. > > /home/myfolder/android-ndk-r8b/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi-gcc > -c -Wall -DPJ_AUTOCONF=1 > -I/home/myfolder/android-ndk-r8b/platforms/android-9/arch-arm/usr/include > -DPJ_IS_BIG_ENDIAN=0 -DPJ_IS_LITTLE_ENDIAN=1 > -I/home/myfolder/android-c/last-try/third_party/build/speex > -I/home/myfolder/android-c/last-try/third_party/speex/include > -DPJMEDIA_HAS_OPENCORE_AMRNB_CODEC=0 -DPJMEDIA_AUDIO_DEV_HAS_WMME=0 > -I../include -I../../pjlib/include -I../../pjlib-util/include > -I../../pjmedia/include -I../../pjnath/include -I../.. > -I/home/myfolder/android-c/last-try/third_party/build/srtp > -I/home/myfolder/android-c/last-try/third_party/srtp/crypto/include > -I/home/myfolder/android-c/last-try/third_party/srtp/include \ > -o output/pjmedia-audiodev-arm-unknown-linux-androideabi/errno.o \ > ../src/pjmedia-audiodev/errno.c > ../src/pjmedia-audiodev/errno.c:23:26: error: portaudio.h: No such > file or directory > ../src/pjmedia-audiodev/errno.c: In function 'pjmedia_audiodev_strerror': > ../src/pjmedia-audiodev/errno.c:104: warning: implicit declaration of > function 'Pa_GetErrorText' > > Could you please tell me which version of the branch you are using? > Thanks again for your tip. > > > On Thu, Jul 26, 2012 at 5:05 AM, Gang Liu <gangban.lau at gmail.com> wrote: >> monty, >> maybe I could give you my two cents. >> I was able to run pjlib-test/pjmedia-test/pjsua at rooted SAMSUNG devices. >> I used NDK standalone toolchain and follow pjsip cross >> compile/building style (configure/make dep/make).It only spent >> me several hours to let this done (without sound device backend) and >> that was my first attemp for android OS. >> Port pjproject to android is very easy because pjlib already does so many. >> And then you could use native activity and write OpenSLES driver. >> >> regards, >> Gang >> >> On Thu, Jul 26, 2012 at 3:00 AM, Monty Python >> <pythonexperiment at gmail.com> wrote: >>> @RMontoya, I didn't notice... >>> @atik yes, it compiles, and it runs. The application by the way closes >>> shortly after the execution (Android-7 Real device) -.- >>> >>> Thanks to all... By the way, as I said, my aim is to try to compile >>> and run pjsua in C language... in tha apjsua (inside the swig folder) >>> i see less code than the one provided by the pjsua origianl >>> application, bui I could be mistaken. >>> >>> On Wed, Jul 25, 2012 at 7:06 PM, atik <atik.khan at gmail.com> wrote: >>>> Have you try to import apjsua sample apps to eclipse? >>>> >>>> its working fine with me from eclipse.. >>>> >>>> Regards >>>> Atik >>>> >>>> >>>> On Thu, Jul 26, 2012 at 12:43 AM, Monty Python <pythonexperiment at gmail.com> >>>> wrote: >>>>> >>>>> > What is your exact use case? Normally in android you should not need to >>>>> > deploy applications by other (complicated from user point of view) >>>>> > means. >>>>> Well, as I said before, I started compiling the source code given here: >>>>> >>>>> http://svn.pjsip.org/repos/pjproject/branches/projects/android/ >>>>> >>>>> I must say that this branch doesn't provide any kind of .apk, so I >>>>> thought that I could directly execute the application >>>>> /pjsip-apps/src/pjsua. The make-file will output the binary (not the >>>>> .apk, though) in /pjsip-apps/bin. I must say that I've tried that >>>>> application on an Android Emulator, on an Android Rooted Emulator and >>>>> on a real device that hasn't been rooted yet (ie. cannot perform >>>>> strace etc.)... Maybe i'll try to root it. >>>>> >>>>> Now, I've taken a look at android-ndk-r8b samples, and I've seen that >>>>> some "native-samples", such as native-activity, doesn't have to carry >>>>> any kind of .java code, even if they still have AndroidManifest.xml, >>>>> Android.mk, Applications.mk, which are missing on the >>>>> http://svn.pjsip.org/repos/pjproject/branches/projects/android/ >>>>> original source code... Maybe I should recreate the same "file >>>>> architecture" on the official version? >>>>> >>>>> > BTW, this said, the problem is maybe somewhere else. >>>>> I sincerely hope so... >>>>> >>>>> M.P. >>>>> >>>>> >>>>> On Wed, Jul 25, 2012 at 6:02 PM, R?gis Montoya <r3gis.3r at gmail.com> wrote: >>>>> > >>>>> > Hi, >>>>> > >>>>> > CSipSimple supports two backends for audio. One is the OpenSLES one >>>>> > (this >>>>> > one has been integrated and probably improved in pjsip android branch) >>>>> > and >>>>> > the other is the Java-JNI implementation. >>>>> > OpenSLES is only valid from 2.3 and is my default setting from android >>>>> > 3.0 >>>>> > (because some manufacturers did crappy things). The jni implementation >>>>> > is >>>>> > used from android 1.6. >>>>> > >>>>> > If you dive in Android source code you'll see that both OpenSL-ES and >>>>> > Java >>>>> > api relies on the same thing so in terms of performance what you win is >>>>> > the >>>>> > garbage collection cycles and the fact there is no conversion to java >>>>> > arrays >>>>> > (which doesn't have such a big impact). Other benefit of OpenSLES is >>>>> > that it >>>>> > doesn't needs to keep a reference on the dalvik jvm and can be managed >>>>> > directly in C independently of context. >>>>> > If you want to try both options in CSipSimple, you can check the >>>>> > difference >>>>> > by changing a simple option. >>>>> > As OpenSLES (for now) rely on android media server, you are still >>>>> > constrained by same things than a regular app. >>>>> > Google engineers announced that they will rework libwilhelm (the one >>>>> > that >>>>> > implements opensl-es api) to use lower api libraries (such as >>>>> > libstagefright), but that's not yet the case, even in source code of >>>>> > 4.1... >>>>> > So we are waiting for real time audio... >>>>> > >>>>> > In terms of permission you are constrained to the same things than >>>>> > someone >>>>> > using the android audio server from a java app. Besides, normally even >>>>> > at >>>>> > lower layer they will take care to not open a door to apps. It's >>>>> > probably >>>>> > very easy to do by allowing rights to open audio device only to members >>>>> > of >>>>> > one group. >>>>> > >>>>> > Normally strictly talking about unix permission it should not be a >>>>> > problem >>>>> > since you are root when running your binary. However... I'm not fully >>>>> > sure >>>>> > that the android media server doesn't takes an exclusive lock on >>>>> > libstagefright. In which case your app running as binary would not be >>>>> > allowed to do anything. That's just an idea, as I said in my first mail >>>>> > I >>>>> > never tried that because it doesn't make many sense to have a pure >>>>> > binary >>>>> > app. >>>>> > The correct way to have a non platform app on android is to run it from >>>>> > an >>>>> > android application. And android application are apk. Apk are in charge >>>>> > to >>>>> > declare many things including permissions. And these permissions will >>>>> > indeed >>>>> > be applied to the sandboxed user. >>>>> > >>>>> > What you could do however, if you really want to go the way of the >>>>> > binary, >>>>> > is to package your binary inside your apk and to call it from a very >>>>> > simple >>>>> > java app with an execute. >>>>> > >>>>> > What is your exact use case? Normally in android you should not need to >>>>> > deploy applications by other (complicated from user point of view) >>>>> > means. >>>>> > >>>>> > BTW, this said, the problem is maybe somewhere else. I'll test soon >>>>> > apjsua >>>>> > so if I encounter same problem maybe I'll be able to provide more >>>>> > feedback >>>>> > :). >>>>> > >>>>> > >>>>> > On 25/07/2012 17:07, Monty Python wrote: >>>>> >> >>>>> >> Thanks a lot for your reply!! >>>>> >> >>>>> >> I tried to launch the same application on a not-rooted device, and it >>>>> >> gave me, unfortunately, the same result. >>>>> >> >>>>> >> I have also a question about CSipSimple. I've seen that that fork >>>>> >> required to use a java support, maybe in order to avoid the problems >>>>> >> with Android permissions', manifest files and so on. Anyway I am still >>>>> >> perplexed, because NDK has the audio support through OpenSLES, and it >>>>> >> gives also the support to sockets: so I initially thought that, >>>>> >> working on C language, I should operate on Kernel level bypassing all >>>>> >> the "Android Security Level". >>>>> >> >>>>> >> Next, I've read this article on source.android: >>>>> >> >>>>> >> >>>>> >> >>>>> >> http://source.android.com/tech/security/#android-platform-security-architecture >>>>> >> >>>>> >> I'm not misunderstanding, all the applications are run inside a >>>>> >> "Application Sandbox", that it works in Kernel Mode. So, any attempt >>>>> >> to run a "particular application" with audio, sockets ecc. is vain. Is >>>>> >> there any way to bypass this "application sandbox"? Must I really use >>>>> >> .apks in order to use Manifest permissions? Thanks again. >>>>> >> >>>>> >> On Tue, Jul 24, 2012 at 8:53 PM, Monty Python >>>>> >> <pythonexperiment at gmail.com> wrote: >>>>> >>> >>>>> >>> Hi, >>>>> >>> >>>>> >>> Just some ideas, (I never had this issue) but ... : >>>>> >>> >>>>> >>> It could be something with unix rights : on android, applications get >>>>> >>> permissions from their manifest and when android os creates the user >>>>> >>> of >>>>> >>> the >>>>> >>> sandbox for the app it adds this users to relevant groups. >>>>> >>> Because could also be something with the media server of android os >>>>> >>> that >>>>> >>> doesn't allow to use audio for not real android apps. So rather than >>>>> >>> command line launch you should probably try to use the sample >>>>> >>> application >>>>> >>> apk and install it properly. With "adb install your_apk_name.apk" .+ >>>>> >>> >>>>> >>> Another possible root cause is that the emulator doesn't always play >>>>> >>> well >>>>> >>> with the audio layer. First it's absolutely not performant, and second >>>>> >>> sometimes it doesn't detects at all the host audio hardware. I would >>>>> >>> advise >>>>> >>> you to use a real device if you have one. It's way better to develop >>>>> >>> for >>>>> >>> the call / audio purpose. (However emulator is a solution to develop >>>>> >>> for >>>>> >>> the user interface part). >>>>> >>> >>>>> >>> Best regards. >>>>> >>>> >>>>> >>>> 2012/7/25 Monty Python <pythonexperiment at gmail.com> >>>>> >>>> I've also obtained the strace of the pjsua process, hoping that it >>>>> >>>> could expound my problem. Thanks again. >>>>> >>>> stat64("/vendor/lib/libstagefright_amrnb_common.so", 0xbea8f138) = -1 >>>>> >>>> ENOENT (No such file or directory) >>>>> >>>> stat64("/system/lib/libstagefright_amrnb_common.so", >>>>> >>>> {st_mode=S_IFREG|0644, st_size=50760, ...}) = 0 >>>>> >>>> open("/system/lib/libstagefright_amrnb_common.so", >>>>> >>>> O_RDONLY|O_LARGEFILE) >>>>> >>>> = >>>>> >>>> 3 >>>>> >>>> lseek(3, 0, SEEK_SET) = 0 >>>>> >>>> read(3, >>>>> >>>> "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\0\0\0\000"..., >>>>> >>>> 4096) = 4096 >>>>> >>>> lseek(3, -8, SEEK_END) = 50752 >>>>> >>>> read(3, "\1\0\0\0\0\0\0\0", 8) = 8 >>>>> >>>> mmap2(NULL, 53248, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ANONYMOUS, >>>>> >>>> -1, >>>>> >>>> 0) = 0x40b0e000 >>>>> >>>> mmap2(0x40b0e000, 46908, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, >>>>> >>>> 3, 0) = 0x40b0e000 >>>>> >>>> mprotect(0x40b0e000, 49152, PROT_READ|PROT_WRITE|PROT_EXEC) = 0 >>>>> >>>> mmap2(0x40b1a000, 444, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, >>>>> >>>> 3, >>>>> >>>> 0xc) = 0x40b1a000 >>>>> >>>> close(3) = 0 >>>>> >>>> mprotect(0x40b0e000, 49152, PROT_READ|PROT_EXEC) = 0 >>>>> >>>> stat64("/vendor/lib/libstagefright_enc_common.so", 0xbea8f138) = -1 >>>>> >>>> ENOENT (No such file or directory) >>>>> >>>> stat64("/system/lib/libstagefright_enc_common.so", >>>>> >>>> {st_mode=S_IFREG|0644, st_size=5420, ...}) = 0 >>>>> >>>> open("/system/lib/libstagefright_enc_common.so", >>>>> >>>> O_RDONLY|O_LARGEFILE) = >>>>> >>>> 3 >>>>> >>>> lseek(3, 0, SEEK_SET) = 0 >>>>> >>>> read(3, >>>>> >>>> "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\0\0\0\000"..., >>>>> >>>> 4096) = 4096 >>>>> >>>> lseek(3, -8, SEEK_END) = 5412 >>>>> >>>> read(3, "\1\0\0\0\0\0\0\0", 8) = 8 >>>>> >>>> mmap2(NULL, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ANONYMOUS, -1, >>>>> >>>> 0) = 0x40b1b000 >>>>> >>>> mmap2(0x40b1b000, 1700, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, >>>>> >>>> 3, >>>>> >>>> 0) = 0x40b1b000 >>>>> >>>> mprotect(0x40b1b000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC) = 0 >>>>> >>>> mmap2(0x40b1c000, 260, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, >>>>> >>>> 3, >>>>> >>>> 0x1) = 0x40b1c000 >>>>> >>>> close(3) = 0 >>>>> >>>> mprotect(0x40b1b000, 4096, PROT_READ|PROT_EXEC) = 0 >>>>> >>>> stat64("/vendor/lib/libstagefright_avc_common.so", 0xbea8f138) = -1 >>>>> >>>> ENOENT (No such file or directory) >>>>> >>>> stat64("/system/lib/libstagefright_avc_common.so", >>>>> >>>> {st_mode=S_IFREG|0644, st_size=21848, ...}) = 0 >>>>> >>>> open("/system/lib/libstagefright_avc_common.so", >>>>> >>>> O_RDONLY|O_LARGEFILE) = >>>>> >>>> 3 >>>>> >>>> lseek(3, 0, SEEK_SET) = 0 >>>>> >>>> read(3, >>>>> >>>> "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\0\0\0\000"..., >>>>> >>>> 4096) = 4096 >>>>> >>>> lseek(3, -8, SEEK_END) = 21840 >>>>> >>>> read(3, "\1\0\0\0\0\0\0\0", 8) = 8 >>>>> >>>> mmap2(NULL, 24576, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ANONYMOUS, >>>>> >>>> -1, >>>>> >>>> 0) = 0x40b1d000 >>>>> >>>> mmap2(0x40b1d000, 19024, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, >>>>> >>>> 3, 0) = 0x40b1d000 >>>>> >>>> mprotect(0x40b1d000, 20480, PROT_READ|PROT_WRITE|PROT_EXEC) = 0 >>>>> >>>> mmap2(0x40b22000, 256, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, >>>>> >>>> 3, >>>>> >>>> 0x5) = 0x40b22000 >>>>> >>>> close(3) = 0 >>>>> >>>> mprotect(0x40b1d000, 20480, PROT_READ|PROT_EXEC) = 0 >>>>> >>>> mprotect(0x40574000, 1159168, PROT_READ|PROT_EXEC) = 0 >>>>> >>>> mprotect(0x40106000, 4096, PROT_READ|PROT_WRITE) = 0 >>>>> >>>> mprotect(0x40106000, 4096, PROT_READ) = 0 >>>>> >>>> mprotect(0x40106000, 4096, PROT_READ|PROT_WRITE) = 0 >>>>> >>>> mprotect(0x40106000, 4096, PROT_READ) = 0 >>>>> >>>> mprotect(0x40106000, 4096, PROT_READ|PROT_WRITE) = 0 >>>>> >>>> mprotect(0x40106000, 4096, PROT_READ) = 0 >>>>> >>>> mprotect(0x40106000, 4096, PROT_READ|PROT_WRITE) = 0 >>>>> >>>> mprotect(0x40106000, 4096, PROT_READ) = 0 >>>>> >>>> mprotect(0x40106000, 4096, PROT_READ|PROT_WRITE) = 0 >>>>> >>>> mprotect(0x40106000, 4096, PROT_READ) = 0 >>>>> >>>> mprotect(0x40106000, 4096, PROT_READ|PROT_WRITE) = 0 >>>>> >>>> mprotect(0x40106000, 4096, PROT_READ) = 0 >>>>> >>>> mprotect(0x40071000, 155648, PROT_READ|PROT_EXEC) = 0 >>>>> >>>> mprotect(0x40106000, 4096, PROT_READ|PROT_WRITE) = 0 >>>>> >>>> mprotect(0x40106000, 4096, PROT_READ) = 0 >>>>> >>>> mprotect(0x40106000, 4096, PROT_READ|PROT_WRITE) = 0 >>>>> >>>> mprotect(0x40106000, 4096, PROT_READ) = 0 >>>>> >>>> mprotect(0x4006e000, 8192, PROT_READ|PROT_EXEC) = 0 >>>>> >>>> mprotect(0x8000, 1933312, PROT_READ|PROT_EXEC) = 0 >>>>> >>>> sigaction(49264, {0xb00144c4, [], SA_RESTART}, {0xb00144c4, [], >>>>> >>>> SA_RESTART}, 0) = -1 EINVAL (Invalid argument) >>>>> >>>> --- SIGSEGV (Segmentation fault) @ 0 (f0) --- >>>>> >>>> open("/dev/log/main", O_WRONLY|O_LARGEFILE) = 3 >>>>> >>>> writev(3, [{"\7", 1}, {"libc\0", 5}, {"Fatal signal 11 (SIGSEGV) at >>>>> >>>> 0x0"..., 49}], 3) = 55 >>>>> >>>> SYS_224(0x37, 0xbea8f850, 0x3, 0x38) = 465 >>>>> >>>> socket(PF_UNIX, SOCK_STREAM, 0) = 4 >>>>> >>>> connect(4, {sa_family=AF_UNIX, path=@android:debuggerd}, 20) = 0 >>>>> >>>> write(4, "?\1\0\0", 4) = 4 >>>>> >>>> read(4, 0xbea8f888, 1) = ? ERESTARTSYS (To be >>>>> >>>> restarted) >>>>> >>>> --- SIGCONT (Continue) @ 0 (0) --- >>>>> >>>> read(4, "?", 1) = 1 >>>>> >>>> close(4) = 0 >>>>> >>>> sigaction(SIGSEGV, {SIG_DFL}, {0xb0005b29, [], >>>>> >>>> SA_RESTART|SA_SIGINFO}, >>>>> >>>> 0) >>>>> >>>> = 0 >>>>> >>>> rt_sigreturn(0) = -1 EPERM (Operation not >>>>> >>>> permitted) >>>>> >>>> --- SIGSEGV (Segmentation fault) @ 0 (f0) --- >>>>> >>>> +++ killed by SIGSEGV +++ >>>>> >>>> >>>>> >>>> On Tue, Jul 24, 2012 at 8:53 PM, Monty Python >>>>> >>>> <pythonexperiment at gmail.com> wrote: >>>>> >>>>> >>>>> >>>>> Greetings to everyone! >>>>> >>>>> >>>>> >>>>> I'm trying to compile pjsua using the following branch: >>>>> >>>>> http://svn.pjsip.org/repos/pjproject/branches/projects/android/. >>>>> >>>>> I've >>>>> >>>>> tried to do a push (adb push pjsua /data/local/) to my android-sdk >>>>> >>>>> emulator but, when I've tried to execute it via adb shell, the >>>>> >>>>> android >>>>> >>>>> logcat gave me the following SIGFAULT error: where am I wrong? >>>>> >>>>> Thanks >>>>> >>>>> in advance. >>>>> >>>>> >>>>> >>>>> F/libc ( 464): Fatal signal 11 (SIGSEGV) at 0x000000f0 (code=1) >>>>> >>>>> I/DEBUG ( 33): *** *** *** *** *** *** *** *** *** *** *** *** >>>>> >>>>> *** >>>>> >>>>> *** *** *** >>>>> >>>>> I/DEBUG ( 33): Build fingerprint: >>>>> >>>>> 'generic/sdk/generic:4.0.3/MR1/237985:eng/test-keys' >>>>> >>>>> I/DEBUG ( 33): pid: 464, tid: 464 >>> >>>>> >>>>> ./pjsua-arm-unknown-linux-androideabi <<< >>>>> >>>>> I/DEBUG ( 33): signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault >>>>> >>>>> addr 000000f0 >>>>> >>>>> I/DEBUG ( 33): r0 ffffffff r1 beef7c30 r2 beef7c30 r3 >>>>> >>>>> ffffffff >>>>> >>>>> I/DEBUG ( 33): r4 00000000 r5 00000000 r6 00000000 r7 >>>>> >>>>> 00000000 >>>>> >>>>> I/DEBUG ( 33): r8 00000000 r9 00000000 10 00000000 fp >>>>> >>>>> 00000000 >>>>> >>>>> I/DEBUG ( 33): ip 4003c4b9 sp beef7c60 lr 4003c4b1 pc >>>>> >>>>> b000469a >>>>> >>>>> cpsr 00000030 >>>>> >>>>> I/DEBUG ( 33): d0 00000000bd6bc8e3 d1 0000000000000000 >>>>> >>>>> I/DEBUG ( 33): d2 0000000000000000 d3 0000000000000000 >>>>> >>>>> I/DEBUG ( 33): d4 0000000000000000 d5 41c8f0a46e800000 >>>>> >>>>> I/DEBUG ( 33): d6 3f50624dd2f1a9fc d7 c18af9670cce266f >>>>> >>>>> I/DEBUG ( 33): d8 0000000000000000 d9 0000000000000000 >>>>> >>>>> I/DEBUG ( 33): d10 0000000000000000 d11 0000000000000000 >>>>> >>>>> I/DEBUG ( 33): d12 0000000000000000 d13 0000000000000000 >>>>> >>>>> I/DEBUG ( 33): d14 0000000000000000 d15 0000000000000000 >>>>> >>>>> I/DEBUG ( 33): scr 00000010 >>>>> >>>>> I/DEBUG ( 33): >>>>> >>>>> I/DEBUG ( 33): #00 pc b000469a /system/bin/linker >>>>> >>>>> I/DEBUG ( 33): #01 pc 000264ac /system/lib/libc.so >>>>> >>>> >>>>> >>>> (__set_errno) >>>>> >>>>> >>>>> >>>>> I/DEBUG ( 33): >>>>> >>>>> I/DEBUG ( 33): code around pc: >>>>> >>>>> I/DEBUG ( 33): b0004678 95004840 44784a40 4d414b40 447b447a >>>>> >>>>> @H.. at JxD at KAMzD{D >>>>> >>>>> I/DEBUG ( 33): b0004688 682d447d f44f9103 95017140 f0009402 >>>>> >>>>> }D-h..O. at q...... >>>>> >>>>> I/DEBUG ( 33): b0004698 f8d4ff67 b10330f0 f8d44798 b17000e0 >>>>> >>>>> g....0...G....p. >>>>> >>>>> I/DEBUG ( 33): b00046a8 10e4f8d4 f7ff2200 2000f9b5 f8d4e007 >>>>> >>>>> ....."..... .... >>>>> >>>>> I/DEBUG ( 33): b00046b8 f04f20a8 f04230ff f8c40102 b00710a8 . >>>>> >>>>> O..0B......... >>>>> >>>>> I/DEBUG ( 33): >>>>> >>>>> I/DEBUG ( 33): code around lr: >>>>> >>>>> I/DEBUG ( 33): 4003c490 f240b507 9300736c 33fff04f 466b9301 >>>>> >>>>> .. at .ls..O..3..kF >>>>> >>>>> I/DEBUG ( 33): 4003c4a0 fd80f7ff bf00bd0e 4604b510 fe90f7ec >>>>> >>>>> ...........F.... >>>>> >>>>> I/DEBUG ( 33): 4003c4b0 f04f6004 bd1030ff 0ffff110 db02b510 >>>>> >>>>> .`O..0.......... >>>>> >>>>> I/DEBUG ( 33): 4003c4c0 f7ff4240 bd10fff1 48214603 4478b5f0 >>>>> >>>>> @B.......F!H..xD >>>>> >>>>> I/DEBUG ( 33): 4003c4d0 b0976800 68022150 4620ac01 92154e1d >>>>> >>>>> .h..P!.h.. F.N.. >>>>> >>>>> I/DEBUG ( 33): >>>>> >>>>> I/DEBUG ( 33): stack: >>>>> >>>>> I/DEBUG ( 33): beef7c20 00000000 >>>>> >>>>> I/DEBUG ( 33): beef7c24 4003c4c7 /system/lib/libc.so >>>>> >>>>> I/DEBUG ( 33): beef7c28 00000000 >>>>> >>>>> I/DEBUG ( 33): beef7c2c 4002f477 /system/lib/libc.so >>>>> >>>>> I/DEBUG ( 33): beef7c30 b00144c4 >>>>> >>>>> I/DEBUG ( 33): beef7c34 00000000 >>>>> >>>>> I/DEBUG ( 33): beef7c38 10000000 >>>>> >>>>> I/DEBUG ( 33): beef7c3c 00000000 >>>>> >>>>> I/DEBUG ( 33): beef7c40 00000000 >>>>> >>>>> I/DEBUG ( 33): beef7c44 4002f49b /system/lib/libc.so >>>>> >>>>> I/DEBUG ( 33): beef7c48 00000000 >>>>> >>>>> I/DEBUG ( 33): beef7c4c 0000c090 >>>>> >>>>> /data/local/pjsua-arm-unknown-linux-androideabi >>>>> >>>>> I/DEBUG ( 33): beef7c50 b00144c4 >>>>> >>>>> I/DEBUG ( 33): beef7c54 0000c070 >>>>> >>>>> /data/local/pjsua-arm-unknown-linux-androideabi >>>>> >>>>> I/DEBUG ( 33): beef7c58 df0027ad >>>>> >>>>> I/DEBUG ( 33): beef7c5c 00000000 >>>>> >>>>> I/DEBUG ( 33): #01 beef7c60 00000001 >>>>> >>>>> I/DEBUG ( 33): beef7c64 beef7d47 [stack] >>>>> >>>>> I/DEBUG ( 33): beef7c68 00000000 >>>>> >>>>> I/DEBUG ( 33): beef7c6c beef7d6d [stack] >>>>> >>>>> I/DEBUG ( 33): beef7c70 beef7d82 [stack] >>>>> >>>>> I/DEBUG ( 33): beef7c74 beef7d92 [stack] >>>>> >>>>> I/DEBUG ( 33): beef7c78 beef7dba [stack] >>>>> >>>>> I/DEBUG ( 33): beef7c7c beef7df7 [stack] >>>>> >>>>> I/DEBUG ( 33): beef7c80 beef7e10 [stack] >>>>> >>>>> I/DEBUG ( 33): beef7c84 beef7e2a [stack] >>>>> >>>>> I/DEBUG ( 33): beef7c88 beef7f55 [stack] >>>>> >>>>> I/DEBUG ( 33): beef7c8c beef7f68 [stack] >>>>> >>>>> I/DEBUG ( 33): beef7c90 beef7f83 [stack] >>>>> >>>>> I/DEBUG ( 33): beef7c94 beef7fa0 [stack] >>>>> >>>>> I/DEBUG ( 33): beef7c98 beef7fb3 [stack] >>>>> >>>>> I/DEBUG ( 33): beef7c9c 00000000 >>>>> >>>>> I/DEBUG ( 33): beef7ca0 00000010 >>>>> >>>>> I/DEBUG ( 33): beef7ca4 000030d7 >>>>> >>>>> >>>>> >>>>> M.P. >>>>> >>>> >>>>> >>>> _______________________________________________ >>>>> >>>> Visit our blog: http://blog.pjsip.org >>>>> >>>> >>>>> >>>> pjsip mailing list >>>>> >>>> pjsip at lists.pjsip.org >>>>> >>>> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >>>>> >>>> >>>>> >> _______________________________________________ >>>>> >> Visit our blog: http://blog.pjsip.org >>>>> >> >>>>> >> pjsip mailing list >>>>> >> pjsip at lists.pjsip.org >>>>> >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >>>>> > >>>>> > >>>>> > >>>>> > _______________________________________________ >>>>> > Visit our blog: http://blog.pjsip.org >>>>> > >>>>> > pjsip mailing list >>>>> > pjsip at lists.pjsip.org >>>>> > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >>>>> >>>>> _______________________________________________ >>>>> Visit our blog: http://blog.pjsip.org >>>>> >>>>> pjsip mailing list >>>>> pjsip at lists.pjsip.org >>>>> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >>>> >>>> >>>> >>>> _______________________________________________ >>>> Visit our blog: http://blog.pjsip.org >>>> >>>> pjsip mailing list >>>> pjsip at lists.pjsip.org >>>> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >>>> >>> >>> _______________________________________________ >>> Visit our blog: http://blog.pjsip.org >>> >>> pjsip mailing list >>> pjsip at lists.pjsip.org >>> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> _______________________________________________ >> Visit our blog: http://blog.pjsip.org >> >> pjsip mailing list >> pjsip at lists.pjsip.org >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
