Hi Even, This is just for consistency with the other platforms' audio device backends. So, by default, there is no EC, if you want to enable EC (if you want to use VPIO), you use the PJMEDIA_AUDIO_DEV_CAP_EC capability. Best regards, Ming On Tue, Feb 15, 2011 at 3:45 PM, Even Andr? Fiskvik <eaf at oyatel.com> wrote: > Ming: On the ticket I see that?[3411]?has a comment: "Modified default core > audio unit used on iOS from VPIO to RemoteIO". > Could you explain why the default has changed? If I'm not mistaken I have > read that only the VPIO support > echo cancelation on the iPhone? > Best regards, > Even Andr? Fiskvik > On 15. feb. 2011, at 06.35, Ming wrote: > > Hi Dmitry and Cornelis, > > I just simplify the code for interruption handling in coreaudio (for > more details, please see ticket #1175: > http://trac.pjsip.org/repos/ticket/1175). However, there's still one > magic trick to make everything works as expected. You have to add a > single line of code in your application: > > ???[[UIApplication sharedApplication] beginReceivingRemoteControlEvents]; > > (Reference: > http://developer.apple.com/library/ios/#documentation/EventHandling/Conceptual/EventHandlingiPhoneOS/RemoteControl/RemoteControl.html) > > Best regards, > Ming > > On Sun, Feb 13, 2011 at 8:38 AM, ?<cg_vanderbent at mail.com> wrote: > > Yes, I'm having the same problem and it's on my list of sorting this out > > next week. > > Glad you did it, and hope to see a solution soon as this is a show stopper > > issue. > > Regards, > > Cornelis > > > -----Original Message----- > > From: dto <dto2005@xxxxxxxxx> > > To: pjsip list <pjsip at lists.pjsip.org> > > Sent: Sat, Feb 12, 2011 10:44 pm > > Subject: iOS, remote audio lost after interruption by an alarm > > Hello, > > We are using PJSIP in a SIP calling application for iPhone. We currently > > have one problem with audio interruption on iOS 4.2 when in a call. We use > > PJSIP coreaudio_dev as is with no changes. So other PJSIP users will likely > > experience the same problem. It happens in 100% of attempts. > > Following are the easy steps to reproduce it (assuming you already have > > working calling application based on pjsip. I refer to such application as > > "APP"): > > 1) "APP" registers with the SIP server, makes a SIP call. (for example, one > > could call 8800 on Asterisk based SIP server). Stay on this call, send "APP" > > to the background. Remote audio still can be heard. > > 2) Now go to the "Clock" application on iPhone and set up an alarm to happen > > a a minute later from current time. Close the "Clock" app. > > 3) At this point DO NOT put "APP" in the foreground. Observe the call is > > still active in the background, red bar indicates that, you can hear the > > remote audio. > > 4) The alarm happens as scheduled. It plays some sound and shows the dialog. > > Press OK on the dialog. Alarm sound stops, the dialog gets dismissed. > > 5) At this point there is no red bar any more. The remote audio can not be > > heard any more. > > 6) Put "APP" in the foreground, observe the call itself is still active. > > Just the remote audio has gone. > > === > > Tracking down the error, I see that in coreaudio_dev.c, after audio > > interruption ended, the interruptionListener() is called. This one calls > > propListener() as shown below: > > ? ..... > > ? if (inInterruption == kAudioSessionEndInterruption) { > > ? strm->interrupted = PJ_FALSE; > > ? /* There may be an audio route change during the interruption > > ? * (such as when the alarm rings), so we have to notify the > > ? * listener as well. > > ? */ > > ? propListener(strm, kAudioSessionProperty_AudioRouteChange, > > ? 0, NULL); > > ? } else if (inInterruption == kAudioSessionBeginInterruption) { > > ? .... > > Then propListener(), in turn, tries to recreate the audio device and fails > > with the log message below: > > ? .... > > ? if (create_audio_unit(strm->cf->io_comp, 0, > > ? strm->param.dir, strm, > > &strm->io_units[0]) != PJ_SUCCESS) > > ? { > > ? PJ_LOG(3, (THIS_FILE, > > ? "Error: failed to create a new instance of audio unit")); > > ? return; > > ? } > > ? .... > > I added more logging and learned that create_audio_unit() fails on the > > following line: > > ? /* Initialize the audio unit */ > > ? ostatus = AudioUnitInitialize(*io_unit); > > and ostatus is -12985. > > ==== > > Did anybody see that problem? Did anybody fix it? Any thoughts? > > Thanks, > > Dmitry > > > > _______________________________________________ > > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > > pjsip at lists.pjsip.org > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > _______________________________________________ > > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > > pjsip at lists.pjsip.org > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > >
