Joegen, I'm not clear with no 3? Best regards, ?Benny On Sun, Sep 12, 2010 at 12:22 PM, Joegen E. Baclor <joegen.baclor at gmail.com> wrote: > I think you should narrow down your question to specific components and ask > the question how to achive each component using the different modules to > pjproject exposes.? IMO the following components are a must in a workable > PBX framework.? You might get a better answer if you will be more specific. > > 1.? Registrar - (Yes) > 2.? SIP Proxy router (or B2BUA) - (Yes) > 3.? Media Server (Auto-attendant, MoH, Voicemail)? - (Yes) but i've seen > post in this list that pjmedia is not wired and therefore would not perform > well in a multi-channel environmnet > 4.? SIP Trunk compatibility layer (ISTP interoperability) - (Yes) > 5.? RTP Proxy for NAT traversal - (Yes) > 6.? Payload Transcoders - (Yes) > 7.? Device provisioning - (No) > 8.? ISDN interface (if you plan to support POTS in the PBX)? - (No) > > Joegen > > On Saturday, 11 September, 2010 02:58 PM, Jonas Gauffin wrote: > > Hello, > Is the pjsip stack suitable to create a pbx? > If so, which layer do you recommend me to use? > Regards, > ??Jonas > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > >
