Hi, I did the MIPS test and found the problem. It was the echo canceller. Thank you ! Mike. On Tue, May 26, 2009 at 1:04 PM, Olle Frimanson <olle.frimanson at keystream.se > wrote: > Hi Mike, I think you should check a couple of things, first check the > PJMEDIA benchmarks, http://trac.pjsip.org/repos/wiki/PJMEDIA-MIPS > > What codec to you use, is echo cancellation enabled, is resampling done, > different samplings freq on sound device/conf bridge/codec > > Most likely it's either long AEC or un optimzed codec. Check what you get > if AEC is disabled and if you only run a simple codec like G711. > > Hiope this helps / Olle > > > > > > > > > ------------------------------ > *From:* pjsip-bounces at lists.pjsip.org [mailto: > pjsip-bounces at lists.pjsip.org] *On Behalf Of *Mike Kraimer > *Sent:* den 26 maj 2009 13:00 > *To:* pjsip list > *Subject:* [pjsip] Performance Issues > > Hello, > > Can somebody help me with the stages needed to detect performance issues? > When I make a call using pjsua on a Windows Mobile device, the *CPU *rises > to *100%*. > > Where can be the problem? > > Thanks, > Mike Kraimer. > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/attachments/20090531/57fc212b/attachment.html>
