Hi,
I did test in same enviroment but by using two pjsip clients, they worked!
Does it mean, pjsip is not compatible with X-Lite, I use X-Lite version 3.0 build 47546.
Actually I tried some other sip clients before, I could not find one that works with pjsip.
Can you recommend a sip client?
Wwzhdo
--- On Fri, 9/26/08, w zl <wwzhdo at yahoo.com> wrote:
From: w zl <wwzhdo@xxxxxxxxx>
Subject: RE: what SIP server and SIP client shall I use to test PJSIP
To: "Olle Frimanson" <olle.frimanson at keystream.se>
Cc: pjsip at lists.pjsip.org
Date: Friday, September 26, 2008, 4:03 PM
Hi Olle,
Still doesn't work. I added
?cfg.stun_host = pj_str("stun.iptel.org");in simple pjsua sample application; and I also tried setting --stun-srv stun.iptel.org when start pjsua sample application. Neither works.
I made call from pjsua to X-Lite, X-Lite received the call, however, the problem is still same, both clients send packets to sip server, I tested against iptel.org.
?
Any suggestion? I could send you ethereal trace if it helps.
?
thanks
Leo
--- On Thu, 9/25/08, Olle Frimanson <olle.frimanson at keystream.se> wrote:
From: Olle Frimanson <olle.frimanson@xxxxxxxxxxxx>
Subject: RE: what SIP server and SIP client shall I use to test PJSIP
To: wwzhdo at yahoo.com
Date: Thursday, September 25, 2008, 12:50 PM
Hi, PJSUA supports both STUN and ICE, so just compile from Trunk. Look at the instructions on www.pjsip.org
?
Cheers / Olle
?
From: w zl [mailto:wwzhdo@xxxxxxxxx]
Sent: den 25 september 2008 21:30
To: Olle Frimanson
Subject: RE: what SIP server and SIP client shall I use to test PJSIP
?
Thanks Olle,
Can you let me know which API to set STUN sever in PJSIP? Does the PJSIP sample applications, PJSUA and simple PJSUA,?support ICE by default?
?
thanks
Leo
--- On Thu, 9/25/08, Olle Frimanson < olle.frimanson at keystream.se > wrote:
From: Olle Frimanson < olle.frimanson@xxxxxxxxxxxx >
Subject: RE: what SIP server and SIP client shall I use to test PJSIP
To: wwzhdo at yahoo.com
Date: Thursday, September 25, 2008, 12:09 PM
Hi I?m not sure on the SDP attribute you mentioned. But I would suggest you find a STUN server like stun.pjsip.org and turn on ICE on 2 PJSUA clients.
?
And then try this usually solves any NAT issues, as a last resort you need a media relay or TURN server.
?
If you try against X-lite I think Benny told me that they don?t support the latest ICE version.
?
Good luck / Olle
?
From: w zl [mailto:wwzhdo@xxxxxxxxx]
Sent: den 25 september 2008 20:40
To: Olle Frimanson; pjsip at lists.pjsip.org
Subject: RE: what SIP server and SIP client shall I use to test PJSIP
?
Olle, thanks for your quick reply.
I believe that PJSIP should work well, :-), I'm trying to figure out what wrong is on my side.
I tested two X-Lite here inside company network, they worked fine.
?
Acutually one SIP guy here mentioned that does PJSIP support "a=nortproxyyes" in SDP. Acoording to this guy, it will enable SIP client to commuicate with other SIP within local network. If PJSIP supports it, my PJSIP client might be configured in a wrong way.
?
thanks
wwzhdo
--- On Thu, 9/25/08, Olle Frimanson < olle.frimanson at keystream.se > wrote:
From: Olle Frimanson < olle.frimanson@xxxxxxxxxxxx >
Subject: RE: what SIP server and SIP client shall I use to test PJSIP
To: wwzhdo at yahoo.com, "'pjsip list'" <pjsip at lists.pjsip.org>
Date: Thursday, September 25, 2008, 10:40 AM
Hi, we have over the last year tested PJSIP against several different SIP servers and PBX?s (OpenSER, Avaya, Brekeke,?..) and against several different phones (Snom, Polycom, Grandstream, Eyebeam, ?.)
?
So far it all works well, at least for us. Are you sure this is not a configuration issue, either on PJSIP or on server?
?
If you are behind NAT a STUN server and enabling ICE will help a lot, but check that the other clients support ICE as well.
?
BR/Olle
?
From: pjsip-bounces@xxxxxxxxxxxxxxx [mailto:pjsip-bounces at lists.pjsip.org] On Behalf Of w zl
Sent: den 25 september 2008 19:06
To: pjsip at lists.pjsip.org
Subject: what SIP server and SIP client shall I use to test PJSIP
?
Hello,
?
It's my first post :-)
?
It's a quite stupid question, what SIP server and SIP client do you guys use to test PJSIP client against? I'm asking this question because I tested PJSIP client against iptel sip server, X-Lite sip client and some other sip clients, but none of them really worked perfectly with PJSIP, especially when I tested inside company firewall. Any suggestions are?welcome!
?
thanks!
wwzhdo
?
?
?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/attachments/20080926/81a4acca/attachment-0001.html>
