I've gone ahead and made changes to support ip address after the call-id (see below). What is the best way to submit this for possible inclusion in a future release? ----- Original Message ----- From: Mike Wixon To: pjsip at lists.pjsip.org Sent: Saturday, November 01, 2008 12:27 PM Subject: Call-ID Hi all - I'm new to PJSIP and I've run into a compatability problem. I'm working with an endpoint that is looking for the IP address of the sender appended to the call-id. Is there a configuration switch to make this happen? PJSIP is sending: ACK sip:2000 at 172.16.8.36:5060 SIP/2.0 Via: SIP/2.0/UDP 172.16.1.37:5060;rport;branch=z9hG4bKPjf9845dfa-e322-490f-93b7-087acfca58b2 Max-Forwards: 70 From: sip:999@172.16.1.37;tag=d33539a9-6643-4ff2-916a-9ee4942462d5 To: sip:2000 at 172.16.8.36;tag=3913955584-1 Call-ID: 4ae0ad70-e122-4037-af39-ae32947622c7 CSeq: 5281 ACK Content-Length: 0 And I need: ACK sip:2000 at 172.16.8.36:5060 SIP/2.0 Via: SIP/2.0/UDP 172.16.1.37:5060;rport;branch=z9hG4bKPjf9845dfa-e322-490f-93b7-087acfca58b2 Max-Forwards: 70 From: sip:999@172.16.1.37;tag=d33539a9-6643-4ff2-916a-9ee4942462d5 To: sip:2000 at 172.16.8.36;tag=3913955584-1 Call-ID: 4ae0ad70-e122-4037-af39-ae32947622c7 at 172.16.1.37 CSeq: 5281 ACK Content-Length: 0 Any help would be appreciated. Thanks -Mike -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/attachments/20081105/8907e9d7/attachment-0001.html>
