Hi Karthik,
I think adding GSM codec will not disturb the existing codec.
In this case, you may need to perform 'clean all' first before performing build.
Or to make it sure, just get the fresh copy from svn,
modify the macro configuration in ua.cpp appropriately,
then build symbian_ua from that fresh condition.
nanang
On 14/02/2008, Karthik <karthik at cytrion.com> wrote:
> Okie , Let me try to debug this .
>
> Yes the other codecs stopped working
>
> after installing the GSM codec .
>
> --
>
> Karthik
>
>
> On Friday 15 February 2008 01:29, Nanang Izzuddin wrote:
> > Perhaps you can try to debug on target device and put breakpoint in
> > the gsm_codec_decode/encode to see whether it is called, then check
> > the variables,
> > the PCM generated (no sound usually all samples is set to around/= 0),
> > and also notice the gsm_decode return value.
> >
> > > Earlier when I had no GSM codec ,everything worked fine on my N95
> > > device.
> >
> > Does that mean the other codecs(G711a/u) are also troubled after GSM
> > included?
> >
> > nanang
> >
> > On 14/02/2008, Karthik <karthik at cytrion.com> wrote:
> > > Hello Nanang ,
> > >
> > > I just checked out the latest version from the SVN , but still
> > > have
> > >
> > > the same problem .
> > >
> > > On Friday 15 February 2008 00:26, Nanang Izzuddin wrote:
> > > > I have no idea where the problem is, and unfortunately I don't have
> > > > the N95 to test.
> > > > But since Benny have already put this into svn, perhaps you could have
> > > > another try with that.
> > > >
> > > > nanang
> > > >
> > > > On 14/02/2008, Karthik <karthik at cytrion.com> wrote:
> > > > > Hello Nanang ,
> > > > >
> > > > >
> > > > > There is no sound at all from the device . Also I have tried GCCE
> > > > > UREL for
> > > > >
> > > > > my device .
> > > > >
> > > > > Earlier when I had no GSM codec ,everything worked fine on my N95
> > > > > device .
> > > > >
> > > > > On Thursday 14 February 2008 16:05, Nanang Izzuddin wrote:
> > > > > > Hi Karthik,
> > > > > >
> > > > > > What is the symptom? Does it stutter? or no sound at all? or
> > > > > > other?
> > > > > >
> > > > > > Oh ya, my build configuration was GCCE UREL (release on target
> > > > > > device). I havent tried for other configurations.
> > > > > >
> > > > > > AFAIK, N95 has faster processor than E65, the device I used.
> > > > > > So I guess the problem is not about the CPU load then.
> > > > > >
> > > > > > nanang
> > > > > >
> > > > > > On 13/02/2008, Karthik <karthik at cytrion.com> wrote:
> > > > > > > Hello Nanang ,
> > > > > > >
> > > > > > >
> > > > > > > I just tried your procedure for enabling the GSM codec on
> > > > > > > Symbian
> > > > > > >
> > > > > > > and it went well but sound does not work on my N95 .
> > > > > > >
> > > > > > > Please advise .
> > > > > > >
> > > > > > > On Wednesday 13 February 2008 22:34, Nanang Izzuddin wrote:
> > > > > > > > Hi Jones,
> > > > > > > >
> > > > > > > > I have just done an experiment of enabling GSM codec on
> > > > > > > > Symbian, and the result is good: GSM codec works well on
> > > > > > > > Nokia E65.
> > > > > > > >
> > > > > > > > The steps are here:
> > > > > > > > 1. make mmp for libgsmcodec, that contains souce files of
> > > > > > > > third party gsm codec, you can see what files are used (not
> > > > > > > > all files are used) from vs6/vs8 project. (and also add
> > > > > > > > gsm.c wrapper for pjmedia-codec here, or otherwise put the
> > > > > > > > wrapper in pjmedia.mmp) 2. modify bld.inf to include
> > > > > > > > libgsmcodec.mmp
> > > > > > > > 3. modify symbian_ua.mmp to include libgsmcodec.lib in the
> > > > > > > > linking stage 4. set macro PJMEDIA_HAS_GSM_CODEC to 1 for
> > > > > > > > symbian platform (in config_site_sample.h)
> > > > > > > > 5. refresh the bld.inf on the Carbide, clean/rebuild, and
> > > > > > > > test.
> > > > > > > >
> > > > > > > > That's all!
> > > > > > > >
> > > > > > > > nanang
> > > > > > > >
> > > > > > > > On 13/02/2008, Jones David <davidjones96 at yahoo.co.in> wrote:
> > > > > > > > > Hi,
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Pjsip is worked On Symbin,i ported pjsip on mobile.
> > > > > > > > >
> > > > > > > > > i made a call its working fine.its taking codec as PCMU
> > > > > > > > > and PCMA
> > > > > > > > >
> > > > > > > > > i want to enable GSM codec.
> > > > > > > > >
> > > > > > > > > for enabling GSM CODEC i used this function
> > > > > > > > >
> > > > > > > > > pjsua_codec_set_priority("gsm/8000",100);
> > > > > > > > >
> > > > > > > > > still its taken PCMU and PCMA.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > i checked with the windows XP,its taken gsm codec.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > could you tell me how to enable GSM Codec.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > regards
> > > > > > > > >
> > > > > > > > > David
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > ________________________________
> > > > > > > > > Get the freedom to save as many mails as you wish. Click
> > > > > > > > > here to know how.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > _______________________________________________
> > > > > > > > > Visit our blog: http://blog.pjsip.org
> > > > > > > > >
> > > > > > > > > pjsip mailing list
> > > > > > > > > pjsip at lists.pjsip.org
> > > > > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.
> > > > > > > > >org
> > > > > > > >
> > > > > > > > _______________________________________________
> > > > > > > > Visit our blog: http://blog.pjsip.org
> > > > > > > >
> > > > > > > > pjsip mailing list
> > > > > > > > pjsip at lists.pjsip.org
> > > > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.or
> > > > > > > >g
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > Visit our blog: http://blog.pjsip.org
> > > > > > >
> > > > > > > pjsip mailing list
> > > > > > > pjsip at lists.pjsip.org
> > > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
> > > > > >
> > > > > > _______________________________________________
> > > > > > Visit our blog: http://blog.pjsip.org
> > > > > >
> > > > > > pjsip mailing list
> > > > > > pjsip at lists.pjsip.org
> > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
> > > > >
> > > > > _______________________________________________
> > > > > Visit our blog: http://blog.pjsip.org
> > > > >
> > > > > pjsip mailing list
> > > > > pjsip at lists.pjsip.org
> > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
> > > >
> > > > _______________________________________________
> > > > Visit our blog: http://blog.pjsip.org
> > > >
> > > > pjsip mailing list
> > > > pjsip at lists.pjsip.org
> > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
> > >
> > > _______________________________________________
> > > Visit our blog: http://blog.pjsip.org
> > >
> > > pjsip mailing list
> > > pjsip at lists.pjsip.org
> > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
> >
> > _______________________________________________
> > Visit our blog: http://blog.pjsip.org
> >
> > pjsip mailing list
> > pjsip at lists.pjsip.org
> > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>
> _______________________________________________
> Visit our blog: http://blog.pjsip.org
>
> pjsip mailing list
> pjsip at lists.pjsip.org
> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>
