Perhaps you can try to debug on target device and put breakpoint in
the gsm_codec_decode/encode to see whether it is called, then check
the variables,
the PCM generated (no sound usually all samples is set to around/= 0),
and also notice the gsm_decode return value.
> Earlier when I had no GSM codec ,everything worked fine on my N95
> device.
Does that mean the other codecs(G711a/u) are also troubled after GSM included?
nanang
On 14/02/2008, Karthik <karthik at cytrion.com> wrote:
> Hello Nanang ,
>
> I just checked out the latest version from the SVN , but still have
>
> the same problem .
>
>
> On Friday 15 February 2008 00:26, Nanang Izzuddin wrote:
> > I have no idea where the problem is, and unfortunately I don't have
> > the N95 to test.
> > But since Benny have already put this into svn, perhaps you could have
> > another try with that.
> >
> > nanang
> >
> > On 14/02/2008, Karthik <karthik at cytrion.com> wrote:
> > > Hello Nanang ,
> > >
> > >
> > > There is no sound at all from the device . Also I have tried GCCE UREL
> > > for
> > >
> > > my device .
> > >
> > > Earlier when I had no GSM codec ,everything worked fine on my N95
> > > device .
> > >
> > > On Thursday 14 February 2008 16:05, Nanang Izzuddin wrote:
> > > > Hi Karthik,
> > > >
> > > > What is the symptom? Does it stutter? or no sound at all? or other?
> > > >
> > > > Oh ya, my build configuration was GCCE UREL (release on target
> > > > device). I havent tried for other configurations.
> > > >
> > > > AFAIK, N95 has faster processor than E65, the device I used.
> > > > So I guess the problem is not about the CPU load then.
> > > >
> > > > nanang
> > > >
> > > > On 13/02/2008, Karthik <karthik at cytrion.com> wrote:
> > > > > Hello Nanang ,
> > > > >
> > > > >
> > > > > I just tried your procedure for enabling the GSM codec on Symbian
> > > > >
> > > > > and it went well but sound does not work on my N95 .
> > > > >
> > > > > Please advise .
> > > > >
> > > > > On Wednesday 13 February 2008 22:34, Nanang Izzuddin wrote:
> > > > > > Hi Jones,
> > > > > >
> > > > > > I have just done an experiment of enabling GSM codec on Symbian,
> > > > > > and the result is good: GSM codec works well on Nokia E65.
> > > > > >
> > > > > > The steps are here:
> > > > > > 1. make mmp for libgsmcodec, that contains souce files of third
> > > > > > party gsm codec, you can see what files are used (not all files
> > > > > > are used) from vs6/vs8 project. (and also add gsm.c wrapper for
> > > > > > pjmedia-codec here, or otherwise put the wrapper in pjmedia.mmp)
> > > > > > 2. modify bld.inf to include libgsmcodec.mmp
> > > > > > 3. modify symbian_ua.mmp to include libgsmcodec.lib in the
> > > > > > linking stage 4. set macro PJMEDIA_HAS_GSM_CODEC to 1 for symbian
> > > > > > platform (in config_site_sample.h)
> > > > > > 5. refresh the bld.inf on the Carbide, clean/rebuild, and test.
> > > > > >
> > > > > > That's all!
> > > > > >
> > > > > > nanang
> > > > > >
> > > > > > On 13/02/2008, Jones David <davidjones96 at yahoo.co.in> wrote:
> > > > > > > Hi,
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Pjsip is worked On Symbin,i ported pjsip on mobile.
> > > > > > >
> > > > > > > i made a call its working fine.its taking codec as PCMU and
> > > > > > > PCMA
> > > > > > >
> > > > > > > i want to enable GSM codec.
> > > > > > >
> > > > > > > for enabling GSM CODEC i used this function
> > > > > > >
> > > > > > > pjsua_codec_set_priority("gsm/8000",100);
> > > > > > >
> > > > > > > still its taken PCMU and PCMA.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > i checked with the windows XP,its taken gsm codec.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > could you tell me how to enable GSM Codec.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > regards
> > > > > > >
> > > > > > > David
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > ________________________________
> > > > > > > Get the freedom to save as many mails as you wish. Click here
> > > > > > > to know how.
> > > > > > >
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > Visit our blog: http://blog.pjsip.org
> > > > > > >
> > > > > > > pjsip mailing list
> > > > > > > pjsip at lists.pjsip.org
> > > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
> > > > > >
> > > > > > _______________________________________________
> > > > > > Visit our blog: http://blog.pjsip.org
> > > > > >
> > > > > > pjsip mailing list
> > > > > > pjsip at lists.pjsip.org
> > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
> > > > >
> > > > > _______________________________________________
> > > > > Visit our blog: http://blog.pjsip.org
> > > > >
> > > > > pjsip mailing list
> > > > > pjsip at lists.pjsip.org
> > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
> > > >
> > > > _______________________________________________
> > > > Visit our blog: http://blog.pjsip.org
> > > >
> > > > pjsip mailing list
> > > > pjsip at lists.pjsip.org
> > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
> > >
> > > _______________________________________________
> > > Visit our blog: http://blog.pjsip.org
> > >
> > > pjsip mailing list
> > > pjsip at lists.pjsip.org
> > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
> >
> > _______________________________________________
> > Visit our blog: http://blog.pjsip.org
> >
> > pjsip mailing list
> > pjsip at lists.pjsip.org
> > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>
> _______________________________________________
> Visit our blog: http://blog.pjsip.org
>
> pjsip mailing list
> pjsip at lists.pjsip.org
> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>
