thanks klaus Nanang Izzuddin schrieb: > Hi Klaus, > > 2008/8/5 Klaus Darilion <klaus.mailinglists at pernau.at>: >> Hi! >> >> If I got it right the conf bridge gets the timing from the snd port. I >> have the following setup: >> >> ---------------- >> | | >> <---snd_port--------|+---+----<--\ | >> | \ \ -|<-----stream 0--> >> --wav_player_port-->|--------->--/ | >> | \ \ | >> | \ \-----|<-----stream 1-- >> | \--------|<-----stream 2-- >> ---------------- >> > > Yes, basically the master port/port #0 of conf bridge should provide > the timing and 'usually' it relies on sound port for the timing by > connecting sound port to conf bridge's master port (please see > http://trac.pjsip.org/repos/wiki/media-flow). > >> Does the soundport have to be an input into the conf bridge to provide >> the clock? > > No, basically it can be any port as long as the port generates clock, > e.g: pjmedia master port (see > http://www.pjsip.org/pjmedia/docs/html/group__PJMEDIA__MASTER__PORT.htm). > >> Can I connect slots unidirectional or do I have to use undirectional >> media ports to achieve this? > > In conference bridge, connecting slots is actually for unidirectional > media flow, for example connect(0, 3) will *only* enable media flow > from slot 0 to slot 3, to enable media flow from slot 3 to slot 0 you > should issue connect(3, 0). > > Regards, > nanang > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org