Samuel Vinson wrote: > Hi, > > Yes I follow : > http://www.pjsip.org/trac/wiki/audio-problem-dropouts > test > - 1: ko > - 2 : ok > - 3 : ok, I think (see below) > - 4 : CPU is high but with *--ec-tail 0, **--clock-rate 8000, *the > communication is possible, but the voice is metallic !! > - 5 : not for me (ipod/iphone) > - 6 : I redevelop sound device because port_audio doesn't work on > ipod/iphone > > Do you have ideas ? I would very much want you to try to enlarge the buffer in no 5. Sorry if the documentation is a bit misleading. And about the authentication error, the status is 403/Forbidden, which usually means that the authentication has been successful but for some reason the call couldn't be accepted. cheers, -benny > Samuel > > 09:51:38.556 pjsua_app.c > [CONFIRMED] To: sip:XXXXXX at freephonie.net;tag=00-08191-02f33245-3dba68e06 > Call time: 00h:00m:43s, 1st res in 1333 ms, conn in 6512ms > #0 PCMA @8KHz, sendrecv, peer=212.X.X.X:36748 > RX pt=8, stat last update: 00h:00m:05.024s ago > total 1.4Kpkt 347.7KB (405.7KB +IP hdr) @avg=64.0Kbps/74.6Kbps > pkt loss=0 (0.0%), dup=0 (0.0%), reorder=0 (0.0%) > (msec) min avg max last > loss period: 0.000 0.000 0.000 0.000 > jitter : 0.000 0.771 39.500 0.750 > TX pt=8, ptime=20ms, stat last update: never > total 952pkt 148.1KB (186.2KB +IP hdr) @avg 27.2Kbps/34.2Kbps > pkt loss=0 (0.0%), dup=0 (0.0%), reorder=0 (0.0%) > (msec) min avg max last > loss period: 0.000 0.000 0.000 0.000 > jitter : 0.000 0.000 0.000 0.000 > RTT msec : 0.000 0.000 0.000 0.000 > > > > Benny Prijono a ?crit : >> Samuel Vinson wrote: >> >>> Hi Benny, >>> >>> I manage without problem playback and record. For this, I use >>> pjmedia_snd_port_create_player >>> pjmedia_snd_port_create_rec >>> >>> But when I use pjsua, the micro works badly. >>> I checked that Microphone and Speaker are Functioning Properly (cc 0 0), >>> and the audio is sounding like it's skipping some frames. >>> Does pjsua uses pjmedia_snd_port_create ? >>> >> Yes it does. >> >> >>> If yes, can I test like that, to know if the problem comes from that ? >>> pjmedia_wav_player_port_create(..., &file_play_port); >>> pjmedia_wav_writer_port_create(..., &file_rec_port); >>> pjmedia_snd_port_create(..., &snd_port) >>> pjmedia_snd_port_connect( snd_port, file_rec_port); >>> pjmedia_snd_port_connect( snd_port, file_play_port); >>> >> Unfortunately you can't, because the last connect() will disconnect >> the previous connection. >> >> >>> In Pjsua, is it possible to not use pjmedia_snd_port_create but >>> pjmedia_snd_port_create_player and pjmedia_snd_port_create_rec ? by >>> configuration or option ? >>> >> We probably can do this, but I'm not sure if it will solve the >> problem. Can you follow this audio troubleshooting wiki and see if >> it can solve the problem?: >> http://www.pjsip.org/trac/wiki/audio-problem-dropouts >> >> cheers, >> -benny >> >> >>> Thanks in advance >>> >>> Samuel >>> >> >> _______________________________________________ >> Visit our blog: http://blog.pjsip.org >> >> pjsip mailing list >> pjsip at lists.pjsip.org >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> >> > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org -- Benny Prijono http://www.pjsip.org
