Hi Benny, I defined PJMEDIA_SOUND_BUFFER_COUNT to 32 and now it works. Should I reduce the value ? Thanks a lot Samuel Benny Prijono a ?crit : > Samuel Vinson wrote: > >> Hi, >> >> Yes I follow : >> http://www.pjsip.org/trac/wiki/audio-problem-dropouts >> test >> - 1: ko >> - 2 : ok >> - 3 : ok, I think (see below) >> - 4 : CPU is high but with *--ec-tail 0, **--clock-rate 8000, *the >> communication is possible, but the voice is metallic !! >> - 5 : not for me (ipod/iphone) >> - 6 : I redevelop sound device because port_audio doesn't work on >> ipod/iphone >> >> Do you have ideas ? >> > > I would very much want you to try to enlarge the buffer in no 5. > Sorry if the documentation is a bit misleading. > > And about the authentication error, the status is 403/Forbidden, > which usually means that the authentication has been successful but > for some reason the call couldn't be accepted. > > cheers, > -benny > > > >> Samuel >> >> 09:51:38.556 pjsua_app.c >> [CONFIRMED] To: sip:XXXXXX at freephonie.net;tag=00-08191-02f33245-3dba68e06 >> Call time: 00h:00m:43s, 1st res in 1333 ms, conn in 6512ms >> #0 PCMA @8KHz, sendrecv, peer=212.X.X.X:36748 >> RX pt=8, stat last update: 00h:00m:05.024s ago >> total 1.4Kpkt 347.7KB (405.7KB +IP hdr) @avg=64.0Kbps/74.6Kbps >> pkt loss=0 (0.0%), dup=0 (0.0%), reorder=0 (0.0%) >> (msec) min avg max last >> loss period: 0.000 0.000 0.000 0.000 >> jitter : 0.000 0.771 39.500 0.750 >> TX pt=8, ptime=20ms, stat last update: never >> total 952pkt 148.1KB (186.2KB +IP hdr) @avg 27.2Kbps/34.2Kbps >> pkt loss=0 (0.0%), dup=0 (0.0%), reorder=0 (0.0%) >> (msec) min avg max last >> loss period: 0.000 0.000 0.000 0.000 >> jitter : 0.000 0.000 0.000 0.000 >> RTT msec : 0.000 0.000 0.000 0.000 >> >> >> >> Benny Prijono a ?crit : >> >>> Samuel Vinson wrote: >>> >>> >>>> Hi Benny, >>>> >>>> I manage without problem playback and record. For this, I use >>>> pjmedia_snd_port_create_player >>>> pjmedia_snd_port_create_rec >>>> >>>> But when I use pjsua, the micro works badly. >>>> I checked that Microphone and Speaker are Functioning Properly (cc 0 0), >>>> and the audio is sounding like it's skipping some frames. >>>> Does pjsua uses pjmedia_snd_port_create ? >>>> >>>> >>> Yes it does. >>> >>> >>> >>>> If yes, can I test like that, to know if the problem comes from that ? >>>> pjmedia_wav_player_port_create(..., &file_play_port); >>>> pjmedia_wav_writer_port_create(..., &file_rec_port); >>>> pjmedia_snd_port_create(..., &snd_port) >>>> pjmedia_snd_port_connect( snd_port, file_rec_port); >>>> pjmedia_snd_port_connect( snd_port, file_play_port); >>>> >>>> >>> Unfortunately you can't, because the last connect() will disconnect >>> the previous connection. >>> >>> >>> >>>> In Pjsua, is it possible to not use pjmedia_snd_port_create but >>>> pjmedia_snd_port_create_player and pjmedia_snd_port_create_rec ? by >>>> configuration or option ? >>>> >>>> >>> We probably can do this, but I'm not sure if it will solve the >>> problem. Can you follow this audio troubleshooting wiki and see if >>> it can solve the problem?: >>> http://www.pjsip.org/trac/wiki/audio-problem-dropouts >>> >>> cheers, >>> -benny >>> >>> >>> >>>> Thanks in advance >>>> >>>> Samuel >>>> >>>> >>> _______________________________________________ >>> Visit our blog: http://blog.pjsip.org >>> >>> pjsip mailing list >>> pjsip at lists.pjsip.org >>> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >>> >>> >>> >>> >> _______________________________________________ >> Visit our blog: http://blog.pjsip.org >> >> pjsip mailing list >> pjsip at lists.pjsip.org >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> > > >
