Jesse, I think nails and duct tape will work for you. Sounds like a fun project. We did "The Last Slide Show" at our gallery last Year and it was a blast. 15 Ektagraphics going full tilt with a rat's nest of wires. It was all manual - could have used a computer genius. AZ Build a 120/35mm Lookaround! The Lookaround Book. Now an E-book. http://www.panoramacamera.us > -------- Original Message -------- > Subject: [SPAM] Re: Kodak Ektagraphic Slide Projector - 5-pin remote > connector? > From: Jesse French <frencj2@xxxxxxx> > Date: Sun, February 10, 2008 10:13 am > To: List for Photo/Imaging Educators - Professionals - Students > <photoforum@xxxxxxxxxxxxxxxxxx> > Thanks for the info, AZ - that site doesn't seem to have it, and I > tried Digikey and Mouser, but they have such a huge selection it's > like a needle in a haystack. > I think your wire-to-nails idea may be what I end up doing - I'm > doing a five-projector computer controlled setup for eba theatre, a > modern dance company in Albany, NY. Thanks again! > Jesse > On Feb 10, 2008, at 8:38 AM, lookaround360@xxxxxxxxxxxxxxxxx wrote: > > > > Jesse, > > Try here or similar place: > > http://www.electronix.com/catalog/default.php/cPath/5 > > Used to be Radio Shack had this stuff. They may still carry elect. > > hobby parts on line. > > > > I was doing a multi-slide projector project and resorted to home-made > > connectors. Only two pins are needed of the five to advance the > > projectors. I soldered wire to nails. > > > > AZ > > > > Build a 120/35mm Lookaround! > > The Lookaround Book. > > Now an E-book. > > http://www.panoramacamera.us > > > > > > > >> -------- Original Message -------- > >> Subject: [SPAM] Re: Kodak Ektagraphic Slide Projector - 5-pin remote > >> connector? > >> From: Jess Lozano <jvlozano@xxxxxxxxxxx> > >> Date: Sat, February 09, 2008 6:29 pm > >> To: List for Photo/Imaging Educators - Professionals - Students > >> <photoforum@xxxxxxxxxxxxxxxxxx> > >> It sounds like what you are looking for is: > >> Kodak 25 foot (7.6m) 5 Pin Remote CE 58 Extension Cord, Cat # > >> 140-1363 for use with all Kodak Carousel and Ektagraphic > >> Projectors, except models 600, 600H, S, RA 950, RA 960, and Pocket > >> 100. This Extension Cord Extends the range of the standard 12-foot > >> (3.7 m) remote control unit to 37'. > >> I found this item liste on ebay with a starting bid of $9.99. > >> Good luck in your search. > >> Jesse French <frencj2@xxxxxxx> wrote: Hi all, > >> I was wondering if anybody knows a part number for the 5-pin remote > >> control *connector* on Kodak's Ektagraphic slide projectors - just > >> the connector. The remote control model number is EC, or EC-2 or some > >> such, but I'm trying to find the plugs themselves, 5-pin male. > >> Anybody have any ideas? Thanks! > >> Jesse > > > >
