Pb might mean lead.
Chuck
On Jul 31, 2004, at 9:45 PM, Rich Mason wrote:
Hi Marilyn,
I have a 60 CT-1 (there are other models in the 60 series) and the power pack is marked CT 1/2. I don't have a switch such as you describe on the power pack. Inside with the actual battery pack is there is a switch for going from "NC" (NiCad) to "dry" (dryfit battery) or "Pb" (I don't know what that is).
I think the "1" and "0" you describe may be the power on and off switch? I'm not sure of that because my on/off switch isn't labeled at all.
Cheers, Rich
On Saturday, July 31, 2004, at 05:15 PM, Marilyn wrote:
Hello,
For those of you who have, or have had a Metz Mecablitz 60 CT power pack, I
have a question.
It has been a while since I've had to recharge it and I've forgotten where
the switch on top of the unit needs to be set in order for it to recharge.
There is a "1" on one side of the switch and a "0" on the other side.
Where should the switch be set when recharging? Thank you for your help in
advance.
Marilyn
http://richmason.com
