On 7-12-2006 12:05 Mindaugas wrote:
Now about 2 core vs 4 core Woodcrest. For HP DL360 I see similarly
priced dual core 5160@3GHz and four core E5320@xxxxxxxx According to
article's scaling data PostgreSQL performance should be similar (1.86GHz
* 2 * 80% = ~3GHz). And quad core has slightly slower FSB (1066 vs 1333).
So it looks like more likely dual core 5160 Woodrest is the way to go
if I want "ultimate" performance on two sockets?
Besides that I think it should consume a bit less power!?
I think that's the better choice yes. I've seen the X5355 (quad core
2.66Ghz) in work and that one is faster than the 5160 we tested. But its
not as much faster as the extra ghz' could imply, so the 5320 would very
likely not outperform the 5160. At least not in our postgresql benchmark.
Besides that you end up with a slower FSB for more cores (1333 / 2 = 666
per core, 1066 / 4 = 266 per core!) while there will be more traffic
since the seperate "dual cores" on the quad core communicate via the bus
and there are more cores so there is also in an absolute sence more
cache coherency traffic...
So I'd definitely go with the 5160 or perhaps just the 5150 if the
savings can allow for better I/O or more memory.
Best regards,
Arjen
