First off, there is a version mismatch between what you said you compiled and the log you posted.... ----- Original Message ----- From: <dotun@tgnt.net> To: "Gary McMeekin" <gary@rockypond.com> Cc: <nntpcache-users@suburbia.net> Sent: Friday, March 16, 2001 1:19 PM Subject: Help on : 480 Transfer permission denied > Hi GAry, > > Thanks for your tip. > > I eventally gave up on 2.4.0b5, but compiled 2.4.0.b4 just fine. > However I'm hoping anyone can help with a configuration problem that has > overwhelm me, > I can't seem to set up my server to accept articles. I have read tons of > docs, tried a lot of config options, still no joy. A snaphot of the problem > is below.. I have tried a lot of options in nntpcache.access, > nntpcache.servers no joy. > > I'll appreciate all hints. > > Connected to server > Escape character is '^]'. > ihave <1@test> > 200 NNTPcache server V2.3.3 [see www.nntpcache.org] (c) 1996-1998 > Julian Assange <proff@iq.org> Dec 18 2000 ready (posting ok). > 480 Transfer permission denied > > ----- Original Message ----- > From: "Gary McMeekin" <gary@rockypond.com> > To: <nntpcache-users@suburbia.net> > Cc: <nntpcache-users@suburbia.net> > Sent: Tuesday, March 13, 2001 12:50 PM > Subject: NNTPC: compile nntpcache 2.4.0b5 error on Sol 2.6 > > > > > > I found an RPM on www.rpmfind.net for 2.4 b5 for Linux and installed it. I > > am now working and it was a smoot process, apart from a mismatch on the > > cache folder nntpcache.config and where the actual RPM creates the cache > > folder. Perhaps you can dig in there and see the workaround? > > > > Gary > > > > > > ----- Original Message ----- > > From: <dotun@tgnt.net> > > To: <nntpcache-users@suburbia.net> > > Cc: <nntpcache-users@suburbia.net> > > Sent: Thursday, March 08, 2001 2:48 PM > > Subject: NNTPC: compile nntpcache 2.4.0b5 error on Sol 2.6 > > > > > > > > > > Here are my findings.. > > > > > > ran configure with : > > > ./configure --without-authinfo-ldap --without-authinfo-radius > > > > > > in libproff/Makefile > > > remove all intances of lists_test > > > > > > In src/Makefile, tried with and without -lpam support.. > > > > > > I continually get stuck with the error below.. despite the --without-pam > > > flags, src/Makefile still tries to compile with authinfo_pam.c > > > I have also noticed that irrespective of the flags used to run > configure, > > > the contents of nntpcached_SOURCES in src/Makefile remain the same. I > > > believe these pam related enteries are causing the problems. I have even > > > tried to compile with all authinfo turned off, same problem.. > > > > > > If anyone has any idea what I'm missing please pilot me. > > > > > > > > -DHAVE_CONFIG_H -I. -I. -I.. -I../cf -I../common -I../libprof > > > > > /libconfused -I../mmap -I../libmmalloc -I../lib > > > dbz -g -O2 -Wall -pipe -c authinfo_pam.c > > > authinfo_pam.c:28: `pam_got_pass' undeclared here (not in a function) > > > authinfo_pam.c:28: initializer element for > > `pam_authenticator.authinfo_pass' > > > is not constant > > > authinfo_pam.c: In function `pam_got_pass': > > > authinfo_pam.c:88: warning: initialization from incompatible pointer > type > > > make: *** [authinfo_pam.o] Error 1 > > > > > > > > > Megatons of thanks, > > > Dotun > > > > > > > > > ----- Original Message ----- > > > From: "Joel Billiotte" <Joel.Billiotte@cgi.ensmp.fr> > > > To: <nntpcache-users@suburbia.net> > > > Cc: <nntpcache-users@suburbia.net> > > > Sent: Thursday, March 08, 2001 12:53 PM > > > Subject: NNTPC: compile nntpcache 2.4.0b5 error on Sol 2.6 > > > > > > > > > > > > > > Date sent: Thu, 08 Mar 2001 10:31:01 -0500 > > > > From: dotun@tgnt.net > > > > Copies to: tschweikle@FIDUCIA.de > > > > To: nntpcache-users@suburbia.net > > > > Forwarded by: nntpcache-users@suburbia.net > > > > Subject: NNTPC: compile nntpcache 2.4.0b5 error on Sol 2.6 > > > > Date forwarded: Fri, 9 Mar 2001 02:35:47 +1100 (EST) > > > > > > > > > Thomas Wrote in his > > > > > > > > > > >authinfo_pam.c:26: `pam_got_pass' undeclared here (not in a > > > function)= > > > > > >authinfo_pam.c:26: initializer element is not constant > > > > > >authinfo_pam.c:26: (near initialization for > > > `pam_authenticator.authin= > > > > > fo_pass') > > > > > >make[2]: *** [authinfo_pam.o] Error 1 > > > > > >make[2]: Leaving directory > > > `/home/xch4008/cvs/nntpcache-2.4.0b5/src' > > > > > >make[1]: *** [all-recursive] Error 1 > > > > > > make[1]: Leaving directory > `/home/xch4008/cvs/nntpcache-2.4.0b5' > > > > > .make: *** [all-recursive-am] Error 2 > > > > > > > > > > > > > > You can try > > > > make clean > > > > ./configure --without-authinfo-ldap > > > > make > > > > Best regards > > > > > > > > > > > > > I'm having the same problems and hope someone can point me in the > > right > > > direction.. I have read tons of messages all the way from Jan 2000 from > > the > > > archive, I saw many messages sent with the same problem, but none with > a > > > solution. > > > > > I have tried to comment out authinfo_pam.c from the Makefile file , > no > > > joy.. > > > > > The file pam_misc.h also does not exit on my server. > > > > > > > > > > All hints and tips will be warmly appreciated. > > > > > > > > > > Dotun > > > > > > > > > > > > > > > > > _____________________________________________________________ > > > > Joel Billiotte Joel.Billiotte@cgi.ensmp.fr > > > > Centre de Geologie de l'Ingenieur > > > > Universite de Marne-la-Vallee - Batiment IFI > > > > Cite Descartes - 5,Bd Descartes - 77454 Marne-la-Vallee cedex2 > > > > tel : +33 1 49 32 90 89 fax: +33 1 49 32 91 28 > > > > _____________________________________________________________ > > > > Ce message est emis a titre personnel et n'engage pas l'Ecole > > > > des Mines de Paris// This message reflects my own opinion and > > > > does not engage the Ecole des Mines de Paris. > > > > _____________________________________________________________ > > > > > > > > > > > > > > > > > > > > > >
