Hi! On Fre, 2010-01-15 at 03:47 +1100, Microbit_Ubuntu wrote: [...] > Having dug around more, I am now getting the impression that my problem > is actually NOT getting console tty1 output to my serial ttyS0... > > Eg. after boot, I login on ttyS0, ok, I get prompt. > If I then login from tty1 (the USB HID keyboard), I don't get any output > on serial (ttyS0). Well, I would expect output on tty1 if the input came from tty1. And for ttyS0 the same. > BUT if I type in a valid command from USB HID, eg. 'reboot', my embedded > system indeed reboots. Ah, you want to have an USB-keyboard on tty1 as input and the output should appear on ttyS0? Is that easier than using the serial line as input from `minicom`? Hmm, perhaps it's easier to fiddle with HID/USB/... stuff so that the input from tty1 is actually copied/transferred/injected/... into ttyS0 as if it was typed over the serial line. Sorry, but I'm no USB guru (or udev or ...) to help with that. Bernd -- mobil: +43 664 4416156 http://bernd.petrovitsch.priv.at/ Linux Software Entwicklung, Beratung und Dienstleistungen -- To unsubscribe from this list: send an email with "unsubscribe kernelnewbies" to ecartis@xxxxxxxxxxxx Please read the FAQ at http://kernelnewbies.org/FAQ
