netconsole configuration problem in FC-8 and FC-10 with 2.6.28 and 2.6.30 versions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear All,

I am not able to configure the netconsole on my Fedora Core 8 and
Fedora Core 10 systems with 2.6.28 and 2.6.30 kernel versions. I have
gone through the following link and tried all the available options in
that link.

http://www.mjmwired.net/kernel/Documentation/networking/netconsole.txt

I have changed the values in /etc/sysconfig/netconsole. I have also
changed the /proc/sys/kernel/sysrq value to 1 and
/proc/sys/kernel/printk to 9 4 1 7. I also tried with nc command. But
there is no luck.

After going through the following article
http://www.cyberciti.biz/tips/linux-netconsole-log-management-tutorial.html

I tried to load the netconsole with the following command in FC-8 and
FC-10 systems.

# modprobe netconsole 6666@xxxxxxxxxxx/eth0,514@xxxxxxxxxxxxx/00:19:D1:2A:BA:A8

I got the Unknown parameter error.

Please let me know if I am missing any thing in the Fedora Core 8 /
Fedora Core  10 with 2.6.28 / 2.6.30 kernel versions.

Thanks and Regards,
Madhavi M.

--
To unsubscribe from this list: send an email with
"unsubscribe kernelnewbies" to ecartis@xxxxxxxxxxxx
Please read the FAQ at http://kernelnewbies.org/FAQ


[Index of Archives]     [Newbies FAQ]     [Linux Kernel Mentors]     [Linux Kernel Development]     [IETF Annouce]     [Git]     [Networking]     [Security]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux SCSI]     [Linux ACPI]
  Powered by Linux