Hi,
I have a asymmetric dual bridge topology as shown below:
-------
| |
---o--- 172.16.11.5
|
|
-----o----- 172.16.11.6
| |
| | default gw 1.1.1.1
| |
1.1.1.2/30 --o----o--- 2.2.2.2/30
| |
| |
| | (enp10s0f0)
----o----o-----
| |
| XXX |
| |
| br1 br0 | synproxy
| |
----o----o-----
| |
| |
| |
1.1.1.1/30 --o----o--- 2.2.2.1/30
| |
| | default gw 2.2.2.2
| |
-----o----- 172.16.10.1
|
|
---o--- 172.16.10.6
| |
-------
On all machines between 172.16.11.5 and 172.16.10.6
"rp filtering" is off and "ip forwarding" is on.
There is a machine at the middle of topology which is
called "XXX" machine. XXX has two bridges and a SynProxy.
When SynProxy is turned OFF on XXX, I can ping from
172.16.11.5 to 172.16.10.6 and icmp packets follow
this path: br1->172.16.10.1->172.16.10.6->172.16.10.1->br0.
In addition, I can access from 172.16.11.5 to
172.16.10.6 with ssh. So the TCP traffic works as I expect.
However, when SynProxy is turned ON on XXX, I can ping
from 172.16.11.5 to 172.16.10.6 and icmp packets follow
the same path. But I can not access from 172.16.11.5
to 172.16.10.6 using ssh. This is because synproxy can
not send syn ack replies through br1 iface. If I add a
route for synack packets on XXX, i can connect from
172.16.11.5 to 172.16.10.6 with ssh.
route add 172.16.11.5 dev enp10s0f0
But this is not acceptable because 172.16.11.0 network
is cloud. So i could not add route all cloud network
to route table and could not add mac address to arp
table.
How can I connect from 172.16.11.5 to the 172.16.10.6
machine using ssh when SynProxy is turned ON on XXX?
Thanks in advance,
Niyazi
--
To unsubscribe from this list: send the line "unsubscribe netfilter" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
