I've used nftables to perform filtering for a while and today I tried to
configure it for NAT.
I took the example from nftables wiki [1]:
% nft add table nat
% nft add chain nat prerouting { type nat hook prerouting priority 0 \; }
% nft add chain nat postrouting { type nat hook postrouting priority 0 \; }
The first command completes fine, but the second gives me an error:
# nft add chain nat prerouting { type nat hook prerouting priority 0 \; }
<cmdline>:1:1-66: Error: Could not process rule: No such file or directory
add chain nat prerouting { type nat hook prerouting priority 0 ; }
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Also tried this way:
# nft -f /etc/nftables/ipv4-nat
/etc/nftables/ipv4-nat:3:1-2: Error: Could not process rule: No such file
or directory
table nat {
^^
/etc/nftables/ipv4-nat:3:1-2: Error: Could not process rule: No such file
or directory
table nat {
^^
I'm using nftables 0.3 with kernel 3.16.3. Can you help me with it?
[1]
http://wiki.nftables.org/wiki-nftables/index.php/Performing_Network_Address_Translation_%28NAT%29
--
To unsubscribe from this list: send the line "unsubscribe netfilter" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
