Hi all, this is a very strange ask (I don't find any other on the net)... I need to setup a linux box with more than one ethernet ports and every one must have the same ip address. I, of course :), already tried to do it with a lot of solutions that linux offer (iptables+mark+ip route, bonding, a vlan every port), but with the same result... Packet come into the right port but go out through the "last" that I have set, so it will never arrive. An iptables rule that are something like (-t mangle -A OUTPUT -j LOG) says: IN= OUT=eth2 SRC=172.16.0.1 DST=172.16.0.10 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=19468 PROTO=ICMP TYPE=0 CODE=0 ID=41003 SEQ=902 IN= OUT=eth2 SRC=172.16.0.1 DST=172.16.0.3 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=8117 PROTO=ICMP TYPE=0 CODE=0 ID=512 SEQ=37888 IN= OUT=lo SRC=172.16.0.1 DST=172.16.0.1 LEN=88 TOS=0x00 PREC=0xC0 TTL=64 ID=8112 PROTO=ICMP TYPE=3 CODE=1 [SRC=172.16.0.1 DST=172.16.0.3 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=8117 PROTO=ICMP TYPE=0 CODE=0 ID=512 SEQ=37888 ] Here the server have the two ports with 172.16.0.1 and two clients, connected into the two others has 172.16.0.3 and 172.16.0.10 It's there a solution for achieve this? Thanks, Michele -- To unsubscribe from this list: send the line "unsubscribe netfilter" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html