Re: ICMP frag needed not forwarded to MSQ clients

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 26 May 2005, Leonardo wrote:

> > Probably you have got rp_filtering enabled and the routing engine discards
> > the ICMP packets.
>
> Yes, I have it enabled. Disabling it does not solve the problem... :-(
>
> echo 0 > /proc/sys/net/ipv4/conf/eth2/rp_filter
> echo 0 > /proc/sys/net/ipv4/conf/eth0/rp_filter

Can you verify by tcpdump that the ICMP packets do received on eth2?
Can you see them going out on eth0? Anything in the kernel log?

Best regards,
Jozsef
-
E-mail  : kadlec@xxxxxxxxxxxxxxxxx, kadlec@xxxxxxxxxxxxxxx
PGP key : http://www.kfki.hu/~kadlec/pgp_public_key.txt
Address : KFKI Research Institute for Particle and Nuclear Physics
          H-1525 Budapest 114, POB. 49, Hungary


[Index of Archives]     [Linux Netfilter Development]     [Linux Kernel Networking Development]     [Netem]     [Berkeley Packet Filter]     [Linux Kernel Development]     [Advanced Routing & Traffice Control]     [Bugtraq]

  Powered by Linux