> > > All other HD programs use PAFF, you need -mc 2 (and -delay 0.3, use "+" and > "-" > to adjust) to play them. > > Please do not use -vo x11, it will lead to additional performance problems, > either use vdpau (if you have a NVIDIA card and the binary drivers > installed) or > xv or gl:yuv=2. You need development drivers (libxv-dev) to let configure > auto-detect them. > > Carl Eugen > > Thanks for the reply. I tested this but it does not solve the problem. The video is played choppy and at hals rate. Here is an extract from mplayer output: [h264_vdpau @ 0xd60160]number of reference frames exceeds max (probably corrupt input), discarding one [h264_vdpau @ 0xd60160]number of reference frames exceeds max (probably corrupt input), discarding one [h264_vdpau @ 0xd60160]number of reference frames exceeds max (probably corrupt input), discarding one [h264_vdpau @ 0xd60160]number of reference frames exceeds max (probably corrupt input), discarding one [h264_vdpau @ 0xd60160]number of reference frames exceeds max (probably corrupt input), discarding one [h264_vdpau @ 0xd60160]reference picture missing during reorder [h264_vdpau @ 0xd60160]Missing reference picture [h264_vdpau @ 0xd60160]reference picture missing during reorder [h264_vdpau @ 0xd60160]Missing reference picture [h264_vdpau @ 0xd60160]reference picture missing during reorder [h264_vdpau @ 0xd60160]Missing reference picture [h264_vdpau @ 0xd60160]reference picture missing during reorder [h264_vdpau @ 0xd60160]Missing reference picture [h264_vdpau @ 0xd60160]reference picture missing during reorder [h264_vdpau @ 0xd60160]Missing reference picture [h264_vdpau @ 0xd60160]reference picture missing during reorder [h264_vdpau @ 0xd60160]Missing reference picture Etienne _______________________________________________ MPlayer-users mailing list MPlayer-users@xxxxxxxxxxxx https://lists.mplayerhq.hu/mailman/listinfo/mplayer-users