The patch titled rtc-v3020: coding style cleanup has been removed from the -mm tree. Its filename was rtc-v3020-coding-style-cleanup.patch This patch was dropped because it was merged into mainline or a subsystem tree The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: rtc-v3020: coding style cleanup From: Mike Rapoport <mike@xxxxxxxxxxxxxx> Signed-off-by: Mike Rapoport <mike@xxxxxxxxxxxxxx> Acked-by: Alessandro Zummo <a.zummo@xxxxxxxxxxxx> Cc: David Brownell <david-b@xxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/rtc/rtc-v3020.c | 40 +++++++++++++++++--------------------- 1 file changed, 18 insertions(+), 22 deletions(-) diff -puN drivers/rtc/rtc-v3020.c~rtc-v3020-coding-style-cleanup drivers/rtc/rtc-v3020.c --- a/drivers/rtc/rtc-v3020.c~rtc-v3020-coding-style-cleanup +++ a/drivers/rtc/rtc-v3020.c @@ -28,7 +28,7 @@ #include <linux/rtc-v3020.h> #include <linux/delay.h> -#include <asm/io.h> +#include <linux/io.h> #undef DEBUG @@ -63,7 +63,7 @@ static void v3020_set_reg(struct v3020 * static unsigned char v3020_get_reg(struct v3020 *chip, unsigned char address) { - unsigned int data=0; + unsigned int data = 0; int i; for (i = 0; i < 4; i++) { @@ -106,16 +106,14 @@ static int v3020_read_time(struct device tmp = v3020_get_reg(chip, V3020_YEAR); dt->tm_year = bcd2bin(tmp)+100; -#ifdef DEBUG - printk("\n%s : Read RTC values\n",__func__); - printk("tm_hour: %i\n",dt->tm_hour); - printk("tm_min : %i\n",dt->tm_min); - printk("tm_sec : %i\n",dt->tm_sec); - printk("tm_year: %i\n",dt->tm_year); - printk("tm_mon : %i\n",dt->tm_mon); - printk("tm_mday: %i\n",dt->tm_mday); - printk("tm_wday: %i\n",dt->tm_wday); -#endif + dev_dbg(dev, "\n%s : Read RTC values\n", __func__); + dev_dbg(dev, "tm_hour: %i\n", dt->tm_hour); + dev_dbg(dev, "tm_min : %i\n", dt->tm_min); + dev_dbg(dev, "tm_sec : %i\n", dt->tm_sec); + dev_dbg(dev, "tm_year: %i\n", dt->tm_year); + dev_dbg(dev, "tm_mon : %i\n", dt->tm_mon); + dev_dbg(dev, "tm_mday: %i\n", dt->tm_mday); + dev_dbg(dev, "tm_wday: %i\n", dt->tm_wday); return 0; } @@ -125,15 +123,13 @@ static int v3020_set_time(struct device { struct v3020 *chip = dev_get_drvdata(dev); -#ifdef DEBUG - printk("\n%s : Setting RTC values\n",__func__); - printk("tm_sec : %i\n",dt->tm_sec); - printk("tm_min : %i\n",dt->tm_min); - printk("tm_hour: %i\n",dt->tm_hour); - printk("tm_mday: %i\n",dt->tm_mday); - printk("tm_wday: %i\n",dt->tm_wday); - printk("tm_year: %i\n",dt->tm_year); -#endif + dev_dbg(dev, "\n%s : Setting RTC values\n", __func__); + dev_dbg(dev, "tm_sec : %i\n", dt->tm_sec); + dev_dbg(dev, "tm_min : %i\n", dt->tm_min); + dev_dbg(dev, "tm_hour: %i\n", dt->tm_hour); + dev_dbg(dev, "tm_mday: %i\n", dt->tm_mday); + dev_dbg(dev, "tm_wday: %i\n", dt->tm_wday); + dev_dbg(dev, "tm_year: %i\n", dt->tm_year); /* Write all the values to ram... */ v3020_set_reg(chip, V3020_SECONDS, bin2bcd(dt->tm_sec)); @@ -191,7 +187,7 @@ static int rtc_probe(struct platform_dev /* Test chip by doing a write/read sequence * to the chip ram */ v3020_set_reg(chip, V3020_SECONDS, 0x33); - if(v3020_get_reg(chip, V3020_SECONDS) != 0x33) { + if (v3020_get_reg(chip, V3020_SECONDS) != 0x33) { retval = -ENODEV; goto err_io; } _ Patches currently in -mm which might be from mike@xxxxxxxxxxxxxx are origin.patch linux-next.patch spi_bfin5xx-remove-unused-is_dma_aligned-macro.patch spi-add-dma_alignment-field-to-spi_master.patch pxa2xx_spi-set-spi_masterdma_alignment-=-8.patch spi_imx-set-spi_masterdma_alignment-=-4.patch rtc-v3020-add-ability-to-access-v3020-chip-with-gpios.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html