The patch titled
synclink_gt: add clock options
has been added to the -mm tree. Its filename is
synclink_gt-add-clock-options.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: synclink_gt: add clock options
From: Paul Fulghum <paulkf@xxxxxxxxxxxxx>
Add support for x8 asynchronous sample rate and ability to specify base
clock frequency.
Signed-off-by: Paul Fulghum <paulkf@xxxxxxxxxxxxx>
Cc: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/char/synclink_gt.c | 58 ++++++++++++++++++++++-------------
include/linux/synclink.h | 1
2 files changed, 39 insertions(+), 20 deletions(-)
diff -puN drivers/char/synclink_gt.c~synclink_gt-add-clock-options drivers/char/synclink_gt.c
--- a/drivers/char/synclink_gt.c~synclink_gt-add-clock-options
+++ a/drivers/char/synclink_gt.c
@@ -298,6 +298,7 @@ struct slgt_info {
unsigned int rbuf_fill_level;
unsigned int if_mode;
+ unsigned int base_clock;
/* device status */
@@ -1156,22 +1157,26 @@ static long set_params32(struct slgt_inf
return -EFAULT;
spin_lock(&info->lock);
- info->params.mode = tmp_params.mode;
- info->params.loopback = tmp_params.loopback;
- info->params.flags = tmp_params.flags;
- info->params.encoding = tmp_params.encoding;
- info->params.clock_speed = tmp_params.clock_speed;
- info->params.addr_filter = tmp_params.addr_filter;
- info->params.crc_type = tmp_params.crc_type;
- info->params.preamble_length = tmp_params.preamble_length;
- info->params.preamble = tmp_params.preamble;
- info->params.data_rate = tmp_params.data_rate;
- info->params.data_bits = tmp_params.data_bits;
- info->params.stop_bits = tmp_params.stop_bits;
- info->params.parity = tmp_params.parity;
+ if (tmp_params.mode == MGSL_MODE_BASE_CLOCK) {
+ info->base_clock = tmp_params.clock_speed;
+ } else {
+ info->params.mode = tmp_params.mode;
+ info->params.loopback = tmp_params.loopback;
+ info->params.flags = tmp_params.flags;
+ info->params.encoding = tmp_params.encoding;
+ info->params.clock_speed = tmp_params.clock_speed;
+ info->params.addr_filter = tmp_params.addr_filter;
+ info->params.crc_type = tmp_params.crc_type;
+ info->params.preamble_length = tmp_params.preamble_length;
+ info->params.preamble = tmp_params.preamble;
+ info->params.data_rate = tmp_params.data_rate;
+ info->params.data_bits = tmp_params.data_bits;
+ info->params.stop_bits = tmp_params.stop_bits;
+ info->params.parity = tmp_params.parity;
+ }
spin_unlock(&info->lock);
- change_params(info);
+ program_hw(info);
return 0;
}
@@ -2559,10 +2564,13 @@ static int set_params(struct slgt_info *
return -EFAULT;
spin_lock_irqsave(&info->lock, flags);
- memcpy(&info->params, &tmp_params, sizeof(MGSL_PARAMS));
+ if (tmp_params.mode == MGSL_MODE_BASE_CLOCK)
+ info->base_clock = tmp_params.clock_speed;
+ else
+ memcpy(&info->params, &tmp_params, sizeof(MGSL_PARAMS));
spin_unlock_irqrestore(&info->lock, flags);
- change_params(info);
+ program_hw(info);
return 0;
}
@@ -3432,6 +3440,7 @@ static struct slgt_info *alloc_dev(int a
info->magic = MGSL_MAGIC;
INIT_WORK(&info->task, bh_handler);
info->max_frame_size = 4096;
+ info->base_clock = 14745600;
info->rbuf_fill_level = DMABUFSIZE;
info->port.close_delay = 5*HZ/10;
info->port.closing_wait = 30*HZ;
@@ -3779,7 +3788,7 @@ static void enable_loopback(struct slgt_
static void set_rate(struct slgt_info *info, u32 rate)
{
unsigned int div;
- static unsigned int osc = 14745600;
+ unsigned int osc = info->base_clock;
/* div = osc/rate - 1
*
@@ -4083,18 +4092,27 @@ static void async_mode(struct slgt_info
* 06 CTS IRQ enable
* 05 DCD IRQ enable
* 04 RI IRQ enable
- * 03 reserved, must be zero
+ * 03 0=16x sampling, 1=8x sampling
* 02 1=txd->rxd internal loopback enable
* 01 reserved, must be zero
* 00 1=master IRQ enable
*/
val = BIT15 + BIT14 + BIT0;
+ /* JCR[8] : 1 = x8 async mode feature available */
+ if ((rd_reg32(info, JCR) & BIT8) && info->params.data_rate &&
+ ((info->base_clock < (info->params.data_rate * 16)) ||
+ (info->base_clock % (info->params.data_rate * 16)))) {
+ /* use 8x sampling */
+ val |= BIT3;
+ set_rate(info, info->params.data_rate * 8);
+ } else {
+ /* use 16x sampling */
+ set_rate(info, info->params.data_rate * 16);
+ }
wr_reg16(info, SCR, val);
slgt_irq_on(info, IRQ_RXBREAK | IRQ_RXOVER);
- set_rate(info, info->params.data_rate * 16);
-
if (info->params.loopback)
enable_loopback(info);
}
diff -puN include/linux/synclink.h~synclink_gt-add-clock-options include/linux/synclink.h
--- a/include/linux/synclink.h~synclink_gt-add-clock-options
+++ a/include/linux/synclink.h
@@ -125,6 +125,7 @@
#define MGSL_MODE_MONOSYNC 3
#define MGSL_MODE_BISYNC 4
#define MGSL_MODE_RAW 6
+#define MGSL_MODE_BASE_CLOCK 7
#define MGSL_BUS_TYPE_ISA 1
#define MGSL_BUS_TYPE_EISA 2
_
Patches currently in -mm which might be from paulkf@xxxxxxxxxxxxx are
synclink_gt-add-clock-options.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
