The patch titled cirrusfb: do not calculate line length twice has been removed from the -mm tree. Its filename was cirrusfb-do-not-calculate-line-length-twice.patch This patch was dropped because it was merged into mainline or a subsystem tree The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: cirrusfb: do not calculate line length twice From: Krzysztof Helt <krzysztof.h1@xxxxx> A line length is calculated twice: first in the cirrusfb_decode_var() then in the cirrusfb_set_par_foo(). Use the first calculated value. A nice side effect is that 32bpp mode works now. Signed-off-by: Krzysztof Helt <krzysztof.h1@xxxxx> Cc: Geert Uytterhoeven <geert.uytterhoeven@xxxxxxxxx> Cc: Arthur Marsh <arthur.marsh@xxxxxxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/video/cirrusfb.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff -puN drivers/video/cirrusfb.c~cirrusfb-do-not-calculate-line-length-twice drivers/video/cirrusfb.c --- a/drivers/video/cirrusfb.c~cirrusfb-do-not-calculate-line-length-twice +++ a/drivers/video/cirrusfb.c @@ -694,7 +694,8 @@ static int cirrusfb_set_par_foo(struct f struct cirrusfb_regs regs; u8 __iomem *regbase = cinfo->regbase; unsigned char tmp; - int offset = 0, err; + int err; + int pitch; const struct cirrusfb_board_info_rec *bi; int hdispend, hsyncstart, hsyncend, htotal; int yres, vdispend, vsyncstart, vsyncend, vtotal; @@ -1027,7 +1028,6 @@ static int cirrusfb_set_par_foo(struct f vga_wseq(regbase, VGA_SEQ_MEMORY_MODE, 0x06); /* plane mask: only write to first plane */ vga_wseq(regbase, VGA_SEQ_PLANE_WRITE, 0x01); - offset = var->xres_virtual / 16; } /****************************************************** @@ -1113,7 +1113,6 @@ static int cirrusfb_set_par_foo(struct f vga_wseq(regbase, VGA_SEQ_MEMORY_MODE, 0x0a); /* plane mask: enable writing to all 4 planes */ vga_wseq(regbase, VGA_SEQ_PLANE_WRITE, 0xff); - offset = var->xres_virtual / 8; } /****************************************************** @@ -1190,7 +1189,6 @@ static int cirrusfb_set_par_foo(struct f vga_wseq(regbase, VGA_SEQ_MEMORY_MODE, 0x0a); /* plane mask: enable writing to all 4 planes */ vga_wseq(regbase, VGA_SEQ_PLANE_WRITE, 0xff); - offset = var->xres_virtual / 4; } /****************************************************** @@ -1263,7 +1261,6 @@ static int cirrusfb_set_par_foo(struct f vga_wseq(regbase, VGA_SEQ_MEMORY_MODE, 0x0a); /* plane mask: enable writing to all 4 planes */ vga_wseq(regbase, VGA_SEQ_PLANE_WRITE, 0xff); - offset = var->xres_virtual / 4; } /****************************************************** @@ -1277,9 +1274,10 @@ static int cirrusfb_set_par_foo(struct f "What's this? requested color depth == %d.\n", var->bits_per_pixel); - vga_wcrt(regbase, VGA_CRTC_OFFSET, offset & 0xff); + pitch = info->fix.line_length >> 3; + vga_wcrt(regbase, VGA_CRTC_OFFSET, pitch & 0xff); tmp = 0x22; - if (offset & 0x100) + if (pitch & 0x100) tmp |= 0x10; /* offset overflow bit */ /* screen start addr #16-18, fastpagemode cycles */ @@ -1287,7 +1285,7 @@ static int cirrusfb_set_par_foo(struct f /* screen start address bit 19 */ if (cirrusfb_board_info[cinfo->btype].scrn_start_bit19) - vga_wcrt(regbase, CL_CRT1D, 0x00); + vga_wcrt(regbase, CL_CRT1D, (pitch >> 9) & 1); if (cinfo->btype == BT_LAGUNA || cinfo->btype == BT_GD5480) { _ Patches currently in -mm which might be from krzysztof.h1@xxxxx are origin.patch linux-next.patch tdfxfb-move-i2c-functionality-into-the-tdfxfb.patch tdfxfb-make-use-of-ddc-information-about-connected-monitor.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html